AVK supplier in Romania
For AVK we quote resilient seated gate valves, 756 series butterfly valves, underground and above-ground hydrants and 851 series air valves; we start from the item code, and availability and lead time are confirmed in the quotation.
Founded in 1941 · Headquarters: Galten, Denmark
Who is AVK and what does it make?
AVK started in 1941 from the idea of a Danish engineer and has grown into a manufacturer of valves for water and gas networks. AVK has focused mainly on water, sewage and gas infrastructure, which shows in the depth of the range: resilient seated gate valves, butterfly valves (for example the 756 series), check valves (41 series), air valves (851 series) and hydrants.
AVK's strong point is the resilient wedge gate valve with a fully rubber-coated wedge, a design with no dead spaces where debris or deposits could remain, with full sealing at 0 bar pressure difference and no stem leakage thanks to multiple O-ring seals. Dimensions, nominal pressures and coatings depend on type and code; we confirm them from the AVK datasheet. AVK also offers fittings for gas networks.
AVK means a single supplier for everything involved in isolating and controlling a buried network (valves, hydrants, air valves and connection parts), all designed to last decades underground, with minimal maintenance and high reliability in operation that is rare but critical.
What do we supply from the AVK range?
| Product | Description |
|---|---|
| Resilient Seated Gate Valves | Resilient seated gate valves for drinking water and wastewater networks, with a wedge vulcanised in EPDM rubber approved for drinking water (for example type 02-20-042). Diameters, nominal pressures, materials and coatings depend on type and we confirm them by code, from the AVK datasheet. |
| 756 Series Butterfly Valves | Double-eccentric butterfly valves for large sizes, where a gate valve would be too heavy or too expensive; for example type 756-100-771: DN150–DN1200, PN25, ductile iron body with epoxy coating, EPDM seal approved for drinking water, gearbox with IP67 sealing. Manual operation with gearbox, pneumatic or electric, with a visible position indicator. Frequently used to isolate large pipeline sections, at the inlet of pumping stations, or as coarse flow control valves in raw water and industrial water networks. |
| Underground and Above-Ground Hydrants | Hydrants for firefighting and for network drain/flushing points, available in underground (buried, with cover at ground level) and above-ground (visible column) versions. Diameters, nominal pressures, materials and connection type depend on type and we confirm them by code, from the AVK datasheet. |
| 851 Series Network Air Valves | Automatic valves for discharging air accumulated at high points of water pipelines and for admitting air during draining or in case of pipe rupture, preventing hydraulic water hammer. The 851 series includes double-orifice, triple-action valves, which let air out or in quickly when the pipeline is filled or drained. Fitted on drinking water or industrial water transmission pipelines at every high point, essential for protecting the network during pump start/stop operations. |
Why AVK?
- Specialisation in water, sewage and gas infrastructure, the company's main focus for over eight decades
- Resilient seated gate valves with no dead spaces, giving full sealing even after years buried without operation
- Epoxy coating inside and out, with proven corrosion resistance in wet or aggressive soil
- Integrated range: valves, hydrants, air valves and connections from the same range
- Global presence: a group of over 100 companies on several continents; spare parts are identified by product code
- Technical documentation by code: product datasheets with the applicable standards and approvals, according to the manufacturer's documentation
Which AVK codes and series are requested most often?
| Code | Description |
|---|---|
| 41-21-001 | Swing check valve with resilient seat, DN50–DN300, PN10/PN16, for drinking water and wastewater |
| 851-40-001 | Air valve with double orifice and triple action for pipelines |
| 45-59-020 | Gate valve built to American standards, ductile iron body |
| 6133-61-001 | Metal-seated gate valve, PN64, for water and industry |
| 27-00-001 | American-type underground hydrant, 250 PSI, with impact-protection flange |
| 779-65-001 | Knife gate valve, bidirectional, for abrasive slurries and heavy industry |
| 29-26-001 | Sandwich-type isolation valve, full bore, for water networks |
| 55-30-021 | Resilient seated gate valve, flanged, to EN 558-2 |
| 02-20-042 | Resilient seated gate valve, flanged, for drinking water and wastewater |
| 756-100-771 | Double-eccentric butterfly valve, PN25, with IP67 sealed gearbox |
| 756-230-001 | Double-eccentric butterfly valve, to EN 593, for water and wastewater |
Where is AVK equipment used?
- Drinking water and distribution: municipal transmission and distribution networks
- Sewage and wastewater treatment: valves for collectors and pumping stations
- Natural gas distribution: valves for PE and steel networks
- Municipal utilities: management of utility networks
- Irrigation: valves for large-area irrigation networks
- Firefighting: hydrants and dedicated fire networks
- Desalination and water treatment: section isolation in treatment plants
How do we supply AVK in Romania?
We work from the technical documentation of the manufacturer AVK and through EU supply channels for gate valves, butterfly valves, hydrants and air valves. For common connection components and spare parts, the lead time is 24–72 h when the item is in stock, locally or at the supplier; for project diameters and configurations, we supply to order, usually in 1–4 weeks. Please send us the nominal diameter, the nominal pressure and the network type (water, sewage or gas) and, where applicable, the tender specification. Each quotation depends on actual availability in the manufacturer's European supply chain.
Availability of large diameters or special versions of AVK valves is checked on each customer request; AVK warranty service is handled by the manufacturer.
Frequently asked questions about AVK
Which AVK valve should I choose to isolate a drinking water pipeline?
For isolation on drinking water networks, resilient seated gate valves from the 02-20-042 or 55-30-021 series are the usual choice, sealing on EPDM rubber approved for drinking water. For large diameters or high pressures, a metal-seated valve such as 6133-61-001 offers a more robust solution at higher temperatures and pressures.
What is the difference between the AVK 756-100-771 and 756-230-001 butterfly valves?
756-100-771 is a double-eccentric butterfly valve with an IP67 sealed gearbox, at PN25. 756-230-001 is built to EN 593 and is intended for neutral liquids, such as drinking water or treated wastewater, without solids or fibrous impurities, at temperatures up to 70 degrees.
What does "double orifice, triple action" mean for AVK series 851 air valves?
Triple action means rapid release of air when the pipe is filled, rapid intake of air when it is drained, and automatic discharge of accumulated air during operation. Double orifice: small and large orifices, each with a float. Variant 851-45-001: DN50–DN200, 316 stainless steel floats, for drinking water (not wastewater) and neutral liquids up to 70 °C.
What information should I send for an AVK valve quotation?
It helps to specify the nominal diameter, the nominal pressure, the type of end connections, flanged or other, and the fluid handled, including whether it contains solids. These details allow the right choice between a gate valve, a butterfly valve or a knife gate valve from the AVK range.
What is the AVK 27-00-001 hydrant?
It is an American-type underground hydrant, with an impact-protection flange for quick repair after a collision, rated for a pressure of 250 PSI. It is built from ductile iron with a main valve encapsulated in EPDM and is used in street fire protection infrastructure.
How do I request a AVK quotation?
Send the AVK code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: AVK, AVK International, AVK Group (manufacturer documentation)

