Bimba supplier in Romania
For Bimba we quote Original Line pneumatic cylinders, TA series NFPA cylinders, Flat-1 flat cylinders and electric and hydraulic actuators; the complete cylinder code, with the stroke, is enough for a quotation.
Headquarters: University Park, USA
Who is Bimba and what does it make?
Bimba is headquartered in University Park, Illinois. The manufacturer is known for the Original Line pneumatic cylinders, a compact range used for simple linear motion in automation. From the range we can quote pneumatic cylinders, electric actuators, hydraulic components and compressed air preparation accessories.
Bimba covers three actuation technologies (pneumatic, hydraulic and electric) in the same catalogue. The NFPA hydraulic actuators reach pressures of up to 3,000 PSI, and the Flat-1 family offers an ultra-compact profile for installations with limited space.
The Bimba range makes sense at assembly stations, food packaging lines or agricultural equipment where rugged cylinders are needed, without a learning curve on the design side. The TA series (tie rod) cylinders follow standardised NFPA dimensions, so they are interchangeable in footprint with other brands to the same standard.
What do we supply from the Bimba range?
| Product | Description |
|---|---|
| Original Line Pneumatic Cylinders | Standard pneumatic cylinders with a compact profile, available in single or double rod variants, used for basic linear motion at assembly and handling stations. They are the company's original product line. |
| TA Series Cylinders (NFPA Tie Rod) | Tie-rod cylinders to the NFPA standard, built for medium to heavy industrial loads, with the possibility of repairing and replacing the seals without replacing the whole cylinder, with mounting compatible with other brands to the same standard. |
| Flat-1 Cylinders | Ultra-compact flat-profile pneumatic cylinders, for applications where radial installation space is limited: cam handling stations, clamping devices or positioning straps on assembly lines. |
| NFPA Hydraulic Actuators | Hydraulic actuators built to NFPA dimensions, with working pressures of up to 3,000 PSI, for applications where the force required exceeds what standard pneumatics can provide: presses, heavy clamping devices, mobile equipment. |
| Rod-Type Electric Actuators | Electric linear actuators with a rod, designed as an alternative to the classic pneumatic cylinder where precise and repeatable position control is required, without a dedicated compressed air installation. |
Why Bimba?
- Three actuation technologies (pneumatic, hydraulic, electric) in the same catalogue
- NFPA hydraulic actuators with working pressures of up to 3,000 PSI
- The Flat-1 family with an ultra-compact profile for installations where radial space is limited
- TA series (tie rod) cylinders with NFPA-compliant dimensions, interchangeable in footprint with other brands to the same standard
- The range includes pneumatic accessories: regulators, filters, valves, manifolds, sensors
Which Bimba codes and series are requested most often?
| Code | Description |
|---|---|
| Original Line | Standard pneumatic cylinder, compact profile, single or double rod |
| Seria TA | NFPA tie-rod cylinder with tie rods, medium to heavy loads |
| Flat-1 | Pneumatic cylinder with flat profile, ultra-compact |
| NFPA Hydraulic Actuator | Hydraulic actuator to NFPA dimensions, up to 3,000 PSI |
| Round Line Actuator | Pneumatic actuator with round cylindrical body |
| Compact Actuator | Pneumatic actuator with reduced footprint for tight spaces |
| ISO Actuator | Pneumatic cylinder to the ISO mounting standard |
| Rodless Actuator | Rodless pneumatic actuator, linear motion with external carriage |
| Rotary Actuator | Pneumatic actuator for rotary motion |
| Guided Thruster | Guided actuator for positioning with increased lateral rigidity |
| Air Preparation | Air preparation: filters, regulators, lubrication |
| Parallel Gripper | Pneumatic gripper with parallel jaw opening |
| Angular Gripper | Pneumatic gripper with angular jaw opening |
| Inline Manifold | Pneumatic manifold for in-line air distribution |
| Lockout-Tagout Valve | Air isolation valve for safety procedures |
| Booster/Intensifier | Pressure intensifier for pneumatic circuits |
Where is Bimba equipment used?
- Food industry and packaging: compact cylinders for handling and positioning on production lines
- Automotive: pneumatic and electric actuators for assembly stations
- Agriculture: rugged cylinders for equipment exposed to dust and vibration
- General industrial automation: air preparation accessories (regulators, filters, lubrication)
How do we supply Bimba in Romania?
For the Bimba range we work from the manufacturer's technical documentation; we confirm the exact availability in the quotation. We bring in cylinders and actuators to order through EU supply channels, usually in 1–4 weeks, depending on availability at the factory and on confirmation of the exact configuration. For an accurate quotation, send the complete order code (bore, stroke, mounting type, seal material) or, if you do not have it, the application and the working load so that we can identify the right series together. We do not promise availability from a warehouse on any variant; each request is confirmed before the quotation is issued.
Code equivalences between Bimba cylinders and those of other brands are established by checking dimensions; we supply the actuators, without software design support for the electric ones.
Frequently asked questions about Bimba
What force does a Bimba cylinder with a 2 in bore develop at 100 PSI?
A Bimba TA series cylinder with a 2 in bore develops, at 100 PSI (approx. 6.9 bar), a force of 314 lbf (approx. 1,397 N) on the push stroke, on an effective piston area of 3.142 in² (approx. 20.3 cm²). On the retract stroke the force decreases, because the rod takes up part of the area: 284 lbf (approx. 1,263 N) with a 0.625 in rod and 236 lbf (approx. 1,050 N) with a 1 in rod. At 200 PSI (approx. 13.8 bar) the push force doubles, reaching 628 lbf (approx. 2,793 N).
Where is Bimba headquartered?
Bimba is headquartered in University Park, Illinois, USA. The Bimba trade name remains in use for the historic cylinder ranges.
How do I choose the right Bimba cylinder for an application?
Start from the working load, the stroke required and the installation space available. For medium to heavy loads and standardised mounting choose the TA (NFPA) series; for very tight spaces, Flat-1; for high forces, the NFPA hydraulic actuators of up to 3,000 PSI.
Can you supply Bimba cylinders in Romania?
Yes, made to order, usually in 1–4 weeks depending on the configuration and on confirmation of availability at the manufacturer. We do not keep the Bimba range on our own shelves, as these are components configured by bore, stroke and seal type.
What information should I send for a Bimba pneumatic cylinder quotation, by code or by application?
The complete order code if you have it from existing equipment, or, if not, the bore, the stroke wanted, the mounting type and the working environment (dust, humidity, temperature). With this data we confirm the right series and the delivery time.
How do I request a Bimba quotation?
Send the Bimba code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Bimba Manufacturing Company, Bimba (manufacturer documentation)