Bornemann supplier in Romania
Twin-screw pumps for oil and gas
Headquarters: Obernkirchen, Germany
Who is Bornemann and what does it make?
Bornemann is a German manufacturer of twin-screw pumps, based in Obernkirchen. Its well-defined niche is multiphase pumping: multiphase twin-screw pumps convey untreated fluid straight from the well, from wet gas to heavy crude, without prior separation in the field. Multiphase fluids with a gas volume fraction of up to 100% can be handled, and the technology carries no risk of clogging with wax or paraffin.
Without field separation, wellhead separators and associated equipment become unnecessary, which means a simpler layout and a smaller footprint. In addition, the reduced back pressure leads to higher flow and longer production cycles for existing fields. The fields of use presented are conventional, heavy crude, thermal operations, wet gas compression and offshore installations.
Beyond oil and gas, the range also addresses industrial markets: storage and loading terminals, chemicals and petrochemicals, hygienic applications, biofuels, hydrogen and ammonia, LNG and the battery value chain. Flow, pressure, permitted gas fraction and materials depend on the model and the application; we confirm them by code, from the Bornemann documentation.
What do we supply from the Bornemann range?
| Product | Description |
|---|---|
| Multiphase Twin-Screw Pumps | Twin-screw pumps for pumping untreated fluid, from wet gas to heavy crude, in conventional, thermal or offshore applications. Mixtures with a gas volume fraction of up to 100% can be handled. |
| Multiphase Boosting Systems | Multiphase boosting systems (Multiphase Boosting) for oil fields: lower wellhead pressure, more recovered production and a longer field life. The configuration is set based on the actual fluid profile and the requirements of the application. |
| Twin-Screw Pumps for Industry | Twin-screw pumps for industrial and hygienic applications, from chemicals and petrochemicals to storage terminals. |
| Spare Parts, Wear Parts and Service | Spare and wear parts for installed Bornemann pumps, identified by the pump's series and year of manufacture. Factory repairs, on-site service and training are also possible; availability of a specific intervention is confirmed by code. |
Why Bornemann?
- Specialisation in multiphase pumping — twin-screw pumps for untreated fluid, from wet gas to heavy crude
- Gas fraction of up to 100% for multiphase pumps
- No separation at the well — wellhead separators become unnecessary
- German manufacturer based in Obernkirchen
- Services for installed pumps — factory repairs, on-site service, spare and wear parts, training
Where is Bornemann equipment used?
- Oil and gas — multiphase pumping at the well, heavy crude, thermal operations, wet gas compression, offshore
- Storage and loading terminals — transfer of liquid products
- Chemicals and petrochemicals — transfer of fluids from industrial processes
- Hygienic applications — food and pharmaceutical
- Biofuels — transfer in biofuel production
- Hydrogen and ammonia, LNG — energy transition applications
How do we supply Bornemann in Romania?
For Bornemann screw pumps and their refurbishment parts, we work from the manufacturer's technical documentation and through EU supply channels. For replacement screws, bearings and seals, we use 24–72 h as a guide when the item is in stock, locally or at the supplier; for new multiphase pumps or complete boosting systems, the lead time to order is usually 1–4 weeks. To prepare correct sizing we need the actual profile of the fluid pumped — gas fraction, sand content and required pressure — as well as the series of the existing pump, if you are replacing a unit. We prepare the quotation once we have these data.
Availability of multiphase pumps is checked on each request; warranty service for units installed in the field rests with the manufacturer.
Frequently asked questions about Bornemann
What pumps does Bornemann make for multiphase pumping?
Bornemann makes multiphase twin-screw pumps, which convey untreated fluid from the well, from wet gas to heavy crude. They can be used in conventional, thermal and offshore applications.
What gas fraction does a Bornemann multiphase pump accept?
Multiphase fluids with a gas volume fraction of up to 100% can be handled with multiphase twin-screw pumps.
Why are wellhead separators no longer needed?
The multiphase pump conveys the mixture without prior separation. According to Bornemann, the absence of field separation makes wellhead separators and associated equipment unnecessary, and the resulting layout is simpler and takes up less space.
Is there a risk of clogging with wax or paraffin?
With multiphase twin-screw pumps there is no risk of clogging caused by wax or paraffin. For a specific fluid, confirmation is based on the application data and the documentation of the chosen model.
What economic advantages does the manufacturer indicate for multiphase boosting?
Bornemann describes a reduced back pressure, which leads to higher flow, faster return on investment and longer production cycles for existing fields, as well as lower capital and operating costs through a simplified layout.
What data should I send for sizing a Bornemann pump?
It helps to send the gas fraction, sand content, required pressure and, if you are replacing a unit, the series and year of manufacture of the existing pump. With these data we can check the suitable version in the manufacturer's documentation.
How do I request a Bornemann quotation?
Send the Bornemann code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: chemeurope.com, ITT Bornemann (manufacturer documentation)

