Dungs supplier in Romania
Solenoid valves and safety valves for gas installations
Founded in 1945 · Headquarters: Urbach, Germany
Who is Dungs and what does it make?
Karl Dungs is a German manufacturer of solenoid valves and safety valves for gas installations, headquartered in Urbach and active since 1945. The range covers MPA series burner controls, MBE GasMultiBloc® multifunction blocks with two safety valves and two electronic actuators, MBE-S safety shut-off valves with optional pressure regulation, and medium pressure regulators of the FRM and FRM-NOC series. From this portfolio we can quote safety solenoid valves and pressure regulators for gas combustion installations.
Dungs has specialised almost entirely in the safety of gas installations — from domestic burners to industrial process heat applications and gas engines. The FRM series regulators cover pressure ranges from a few kPa up to 400 kPa, depending on the nominal pipe diameter (DN 25-50 or DN 65-80), while the MBE blocks combine several safety functions in a single housing, reducing the number of connections in the installation.
For Romania, the Dungs range makes sense in gas heating installations, industrial boiler houses and burner lines that require certified safety valves and pressure regulators compliant with the design requirements of the gas sector.
What do we supply from the Dungs range?
| Product | Description |
|---|---|
| MPA series burner controls | Controls that manage the start-up sequence of the gas burner — pre-purge, ignition, flame supervision and safe shutdown on fault. They are used on industrial burners and boiler houses where the combustion sequence must be monitored electronically. For a quotation, the customer must specify the burner power, the type of fuel and the supply voltage of the installation. |
| MBE GasMultiBloc® multifunction blocks | Assemblies that combine in a single housing two safety valves with electronic actuators, with optional regulation of the outlet pressure, reducing the number of connections and the risk of leaks from the installation. They are used on medium and high power gas burners. For a quotation, the customer must send the gas flow rate required, the inlet pressure and the diameter of the connecting pipe. |
| FRM / FRM-NOC medium pressure regulators | Regulators for reducing and stabilising gas pressure on pipes of nominal diameter DN 25-50 or DN 65-80, with setting ranges from a few kPa up to 400 kPa depending on the model. They are installed on the supply line before the burner or the point of consumption. For a quotation, the customer must specify the pipe diameter, the inlet pressure and the outlet pressure required. |
Why Dungs?
- Focus almost exclusively on the safety of gas installations, with dedicated ranges from domestic burners to industrial applications
- MBE GasMultiBloc® multifunction blocks that reduce the number of connections and sealing points in the installation
- Medium pressure regulators available for nominal diameters from DN 25 to DN 80
- MPA series burner controls for start-up sequence control and flame supervision
- Stable industrial presence, with approximately 630 employees company-wide and subsidiaries in several countries
Which Dungs codes and series are requested most often?
| Code | Description |
|---|---|
| MPA 41xx V2.0 | Burner control for forced draught or industrial burners |
| MBE GasMultiBloc | Multifunction block with two safety valves and electronic actuation |
| MBE-S | Single safety valve with integrated electronic actuation |
| FRM-NOC | Medium pressure regulator, outlet range 2-400 kPa |
| FRM DN 25-DN 50 | Medium pressure regulator with compensation, range 3-400 kPa |
| FRM DN 65-DN 80 | Medium pressure regulator with compensation, range 9-400 kPa |
| DMV 50050 | Double safety valve for gas, from the DMV range |
| DMV-D(LE)/11 eco | Double safety valve, eco version of the DMV-D/11 series |
| DMV-D(LE)/11 | Double safety valve for gas, DMV-D/11 series |
| DMV-D(LE)/12 | Double safety valve for gas, DMV-D/12 series |
Where is Dungs equipment used?
- Residential and commercial heating — gas burners for boiler houses
- Industrial process heat — low and high temperature installations
- Gas engines — complete gas supply systems
- Food industry — combustion installations for industrial ovens
- Energy — burners for medium and high power boilers
How do we supply Dungs in Romania?
For Dungs we work from the manufacturer's technical documentation and the company's overview page — stock and lead time are confirmed in the quotation. We source safety valves, MBE blocks and FRM regulators to order, through EU supply channels, usually within 1–4 weeks of order confirmation. For a correct quotation, the customer must send us the exact product code or, if they do not have it, the pipe diameter, the working pressure and the power of the burner served. We check the availability of each catalogue reference on request.
Commissioning and final adjustment of the gas burner are the responsibility of the qualified company that carries out the gas installation.
Frequently asked questions about Dungs
What is the Dungs MPA 41xx V2.0 burner control?
MPA 41xx V2.0 is a burner control used on forced draught burners or industrial installations, able to handle both direct ignition and pilot flame operation, in low or high temperature ranges. It monitors the combustion process and shuts off the fuel supply in the event of an ignition or flame fault.
What is the difference between a Dungs MBE-S valve and an MBE GasMultiBloc block?
MBE-S is a single safety valve, with a single shut-off function and its own electronic actuation, whereas MBE GasMultiBloc combines in a single housing two safety valves and separate electronic modules, reducing the number of connections and possible leak points on the gas line. The choice depends on the level of redundancy required by the installation.
Do you supply Dungs combustion equipment in Romania?
Yes, Dungs equipment, from burner controls to valves and pressure regulators, is brought in to order, usually within 1–4 weeks; the technical variety of the range makes it impractical to keep a selection on the shelf. It is useful to send us the working pressure, the connection diameter and the type of application, industrial burner or boiler house.
What is the difference between the Dungs FRM DN 25-DN 50 and FRM DN 65-DN 80 regulators?
The main difference is the connection size and the pressure range covered: the DN 25-DN 50 version works between 3 and 400 kPa, while the DN 65-DN 80 version, for higher flow rates, covers a range from 9 to 400 kPa. Both regulators include inlet pressure compensation, for a constant outlet pressure.
How do I request a Dungs quotation?
Send the Dungs code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Karl Dungs GmbH & Co. KG (manufacturer documentation)