Edbro supplier in Romania
For Edbro we quote front-end cylinders from the CS, CB, CX and HP series, CD ejector cylinders, EGP pumps and PM504/PM505 valves, based on capacity, the number of stages, the stroke and the mounting type.
Who is Edbro and what does it make?
Edbro is a British manufacturer of hydraulic systems for lifting and tipping the bodies of commercial vehicles. The offer is divided into three groups: on-road systems, which include tipping cylinders, double-acting telescopic cylinders, safety equipment and tipping stabilisation systems; off-road systems, with accumulators, heavy-duty single-stage or telescopic cylinders and suspension mounts; and wet kits, with cab controls, filters, hoses, oil tanks, power take-offs (PTO), pumps and valves.
The front-end cylinders are organised in series. The CS series goes from CS07, with 7–11 tonnes, to CS22, with 73–102 tonnes, in 3 to 6 stages and strokes of up to 11,545 mm. CB10, CB11, CB13 and CB15 have 24–60 tonnes and 4, 5 or 6 stages, with trunnion mounting and an outer sleeve. The CX series, from CX07 to CX15, covers 7–32 tonnes, also with trunnions and an outer sleeve, and the HP series (HP11–HP19) is available with an eye mounting, a spherical eye or trunnions with a sleeve. The CD cylinders, from CD10 to CD22, are double-acting ejector (discharge) cylinders on all stages, with hard-chrome inner tubes and strokes of up to 11.5 m.
The tipping pumps are gear pumps from the EGP series, and the bypass valve is PM504/PM505. Safety is covered by high-voltage warning, inclinometers and safety scales. The choice of the cylinder depends on capacity, number of stages, stroke and mounting type.
What do we supply from the Edbro range?
| Product | Description |
|---|---|
| CS, CB and CX front-end cylinders | Telescopic tipping cylinders with 3–6 stages. CS07–CS22 cover 7–102 tonnes, CB10–CB15 cover 24–60 tonnes, and CX07–CX15 cover 7–32 tonnes, with trunnion mounting and an outer sleeve. The maximum stroke of the CS series reaches 11,545 mm. |
| HP front-end cylinders | The HP11, HP13, HP15, HP17 and HP19 series, available in three mounting types: eye, spherical eye and trunnions with an outer sleeve. Capacity, number of stages and stroke are set for each model. |
| CD ejector cylinders | A range of seven models, from CD10 to CD22, of the ejector type, double-acting on all stages, with hard-chrome inner tubes, various base and piston mountings and strokes of up to 11.5 m. |
| Pumps, valves and safety equipment | EGP gear pumps for tippers, PM504/PM505 bypass valve, PTO, tanks, filters, hoses and cab controls, plus high-voltage warning, inclinometer and safety scale. |
Why Edbro?
- CS series over a wide range — from CS07 to CS22, with 7–102 tonnes and 3–6 stages, for small and large tippers
- Trunnion and eye mountings — CB, CX and HP in versions with an eye, a spherical eye or trunnions with an outer sleeve
- CD ejector cylinders — double-acting on all stages, with hard-chrome inner tubes and strokes of up to 11.5 m
- Complete hydraulic kit — EGP gear pumps, PTO, valves, tanks, filters, hoses and cab controls
- Tipping safety equipment — high-voltage warning, inclinometer and safety scale
Which Edbro codes and series are requested most often?
| Code | Description |
|---|---|
| CS07 | Front-end cylinder, 7–11 tonnes |
| CS10 | Front-end cylinder, 16–22 tonnes |
| CS13 | Front-end cylinder, 18–47 tonnes, 3–5 stages |
| CS15 | Front-end cylinder, 22–57 tonnes, 3–5 stages |
| CS19 | Front-end cylinder, 38–75 tonnes, 4–6 stages |
| CS22 | Front-end cylinder, 73–102 tonnes, 5–6 stages |
| CB11 | Front-end cylinder with trunnions and sleeve, 24–60 tonnes |
| CX10 | Front-end cylinder with trunnions and sleeve, 10–13 tonnes |
| CX15 | Front-end cylinder with trunnions and sleeve, 29–32 tonnes |
| HP13 | HP front-end cylinder |
| CD15 | Ejector cylinder, double-acting |
| CD22 | Ejector cylinder, double-acting, large model |
| EGP | Series of gear pumps for tippers |
| PM504 / PM505 | Bypass valve |
Where is Edbro equipment used?
- Transport of aggregates and construction materials — tippers and semi-trailers
- Construction and quarrying — heavy-duty and telescopic cylinders for off-road machinery
- Agricultural transport — tipping trailers with front-end cylinders
- Refuse and discharge vehicles — CD ejector cylinders for bodies
- Fleet service — spare parts for cylinders, pumps and tipping valves
How do we supply Edbro in Romania?
We can quote Edbro front-end cylinders, ejector cylinders, pumps and valves, supplying them to order. The lead time is usually 1–4 weeks to order and, depending on the specification, it can be longer for cylinders with long strokes or special mountings. For a correct quotation, send us the series or the code of the cylinder, the lifting capacity, the number of stages, the stroke, the mounting type (eye, spherical eye or trunnions), the working pressure and a photo of the existing part.
Equivalence with an old cylinder is established from the capacity, the number of stages, the stroke and the dimensions of the mountings.
Frequently asked questions about Edbro
What does Edbro make?
Edbro makes hydraulic systems for lifting and tipping bodies: front-end and ejector cylinders, double-acting telescopic cylinders, accumulators, suspension mounts, wet hydraulic kits with pumps, PTO, valves and tanks, plus tipping safety equipment.
How do I choose the CS, CB or CX series?
The CS series covers a wide range, from 7 to 102 tonnes and up to 6 stages. CB (24–60 tonnes) and CX (7–32 tonnes) have trunnion mounting and an outer sleeve. Send us the capacity required, the stroke and the mounting type, and we recommend the series.
How soon can I receive an Edbro cylinder?
Cylinders are supplied to order, usually in 1–4 weeks. Long strokes or special mountings can extend the lead time, depending on the specification. We give the precise lead time in the quotation, once we receive the series and the dimensions.
Can I replace an old Edbro cylinder with a CS series?
The check is based on capacity, number of stages, stroke, mounting type and working pressure. A direct replacement is confirmed after the comparison; send the code on the cylinder and a photo, with the dimensions of the mountings at both ends.
What data do I send for a quotation on a CD ejector cylinder?
State the series or model, the stroke required, the type of mountings at the base and at the piston, the working pressure and the type of body. For an existing cylinder, also send the code on the tube, the length in the closed position and a photo of the mountings, so that we can check whether the current series keeps the mounting.
How do I request a Edbro quotation?
Send the Edbro code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Edbro (manufacturer documentation)

