Elatech supplier in Romania

For Elatech we quote Open End M and V synchronous belts, ELA-flex SD endless belts, SYNCRO-MAX wide belts and iSync belts; we need the profile, pitch, width, length, tension cord and coating.

Headquarters: Val Brembilla, Italy

Request a quote

Who is Elatech and what does it make?

Elatech designs and manufactures, at Val Brembilla in the province of Bergamo, polyurethane synchronous belts and conveyor belts for industrial applications: linear motion, precise synchronous conveying, lifting and power transmission. The entire manufacturing process is done in-house, with proprietary technologies and its own research and development department, and the quality system is ISO 9001 certified. For a quotation, send us the belt profile and pitch (for example AT10 or T5), the width, the length and the type of tension cord.

Open End belts come in two lines: ELATECH M, rigid and precise, for linear axes and lifting, and ELATECH V, for synchronous conveying, produced in any length and closed by hot welding. The body is 92 Shore A thermoplastic polyurethane, with high-strength steel tension cords, and on request PAZ fabric is applied on the teeth or PAR on the back, for lower friction and noise. Special HFE cords allow pulleys with up to 30% smaller diameter, HPL cords reduce elongation, and stainless steel or aramid versions serve corrosive environments and non-magnetic applications. Profiles include T, AT, HTD, RTD, STD, MXL, XL, L, H and XH, the self-tracking profiles SAT10, TK and ATK with K6 or K13 guide, which need no flanges on the pulleys, and the T10, AT10 and HT8 TOTAL PROTECTION versions.

For long strokes and high speeds there are the ELA-flex SD belts, truly endless, with no joint or weld, made tooth by tooth in lengths of 800–24,000 mm, including double-toothed (DUAL) and the NEXT version, with bifilar S+Z cords that cancel lateral forces. SYNCRO-MAX belts, up to 500 mm wide, with aramid cords, replace conveyor belts and modular plastic belts where synchronism matters. iSync belts transmit up to 30% more than conventional T and AT belts. The ELAClean range, made of homogeneous thermoplastic polyurethane, is intended for food contact. Belts can be customised with coatings, cleats, the EMF mechanical joint, which allows the belt to be fitted without dismantling the machine, the EFT mechanical profile system and special machining.

What do we supply from the Elatech range?

Product	Description
ELATECH M and V Open End belts	Synchronous belts in 92 Shore A polyurethane with steel tension cords, supplied open or closed by hot welding: M for linear motion and lifting, V for synchronous conveying in any length. They are offered in T, AT, HTD and STD profiles and in imperial profiles.
ELA-flex SD and NEXT endless belts	Belts made tooth by tooth, with no joint, in lengths of 800–24,000 mm, for high-speed power transmission and conveying with heavy loads. The NEXT version has bifilar S+Z cords that cancel lateral forces, and DUAL is double-toothed.
SYNCRO-MAX wide belts	Extra-wide synchronous belts, up to 500 mm, in polyurethane with aramid cords, open or welded, with coatings and cleats. They do not slip in the presence of oil or grease, position precisely at high speed and run more quietly than modular plastic belts.
iSync transmission belts and ELAClean food belts	iSync has a polyurethane resin body and steel or aramid cords and transmits up to 30% more than classic T and AT belts. ELAClean, monolithic, in homogeneous thermoplastic polyurethane, is easy to clean and carries meat, fish, dough or dairy products.

Why Elatech?

Fully in-house manufacturing, with proprietary technologies — belts in any length and customisation to drawing
ELA-flex SD with no joint, 800–24,000 mm — no weak sections at high speeds and loads
Self-tracking profiles SAT10, TK and ATK — belt pulleys no longer need flanges
HFE, HPL, stainless steel or aramid cords — smaller pulleys, reduced elongation or corrosive environments
ELAClean for food contact — homogeneous polyurethane, resistant to oil, grease and cleaning agents

Which Elatech codes and series are requested most often?

Code	Description
ELATECH M	Open End belt for linear motion and lifting
ELATECH V	Welded belt for synchronous conveying, any length
ELA-flex SD	Endless synchronous belt, 800–24,000 mm
ELA-flex SD NEXT	Endless belt with bifilar S+Z cords
SYNCRO-MAX	Extra-wide synchronous belt, up to 500 mm, aramid cords
iSync	Synchronous belt for power transmission
ELAClean	Monolithic polyurethane belt for food contact
AT10	Metric AT profile, 10 mm pitch
SAT10	Self-tracking profile, no flanges on pulleys
ATK10-K6	AT10 profile with K6 guide, self-tracking
T10 TOTAL PROTECTION	T10 profile in TOTAL PROTECTION version
EMF	Mechanical belt joint, fitting without dismantling the machine

Where is Elatech equipment used?

Packaging, paper and materials handling — Open End V belts for synchronous conveying
Linear actuators and robotic automation — ELATECH M belts with HPL cords
Food industry — ELAClean and SYNCRO-MAX belts with coatings
Woodworking, glass and stone processing — belts with coatings and cleats for driving workpieces
Lifts and industrial lifting — ELATECH M belts with steel cords

How do we supply Elatech in Romania?

We can quote Elatech Open End M and V belts, ELA-flex SD endless belts, SYNCRO-MAX wide belts, iSync transmission belts, ELAClean food belts and custom versions with coatings, cleats or EMF and EFT systems. For an accurate quotation send us the profile and pitch (for example AT10, T5, HTD 8M), the width, the length or number of teeth, the cord type, any coatings and the cleat drawing, plus the application and speed. We bring them in to order, through EU supply channels, usually in 1–4 weeks; 24–72 h when the item is available locally or at the supplier.

We quote Elatech belts by profile, dimensions and customisation drawing, while fitting and tensioning on the machine are done by your maintenance team.

Frequently asked questions about Elatech

What does Elatech make?

Elatech manufactures polyurethane belts at Val Brembilla, in Italy: Open End M and V synchronous belts, ELA-flex SD endless belts, SYNCRO-MAX wide belts, iSync transmission belts, ELAClean food belts and custom versions with coatings, cleats, EMF mechanical joint, EFT mechanical profiles or special machining.

How do I choose the profile and cord of an Elatech belt?

The profile is set by the existing pulley: T, AT, HTD, STD or imperial (MXL, XL, L, H, XH). For small pulleys choose the HFE cord, for precise positioning HPL, for corrosive environments stainless steel, and for non-magnetic applications aramid. Send us the pitch, the width, the pulley diameters and the load, and we will propose the version.

How soon do you supply Elatech belts?

We bring belts in to order, through EU supply channels, usually in 1–4 weeks. A standard belt that is available locally or at the supplier can go out in 24–72 h. Long ELA-flex SD endless belts or those with cleats and coatings may have a longer lead time, depending on specification.

Can you reproduce a belt with cleats from the worn one?

Yes, if we have the belt profile, width and length, plus the shape, height, pitch and position of the cleats or the coating. A drawing is ideal; otherwise send us photos with a ruler next to the belt and a piece of the profile, and we will establish the cleat version and how it is fixed.

What data do I send for an Elatech belt quotation?

The belt type (open, welded or endless), the profile and pitch, the width, the length or number of teeth, the cord material, any PAZ or PAR fabric, the coating and cleats, the quantity and the application (linear axis, conveying, transmission), with speed and load.

How do I request a Elatech quotation?

Send the Elatech code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.