Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Electro Adda supplier in Romania

Asynchronous electric motors

Founded in 1948 · Headquarters: Beverate di Brivio, Italy

Request a quote

Who is Electro Adda and what does it make?

Electro Adda has made three-phase asynchronous electric motors since 1948 at Beverate di Brivio, in the province of Lecco, Italy, with a stated annual output of over 110,000 motors, from fractions of a kW up to 1.6 MW. The main range is split into two construction series: the C series, in aluminium, for frame sizes from 63 to 355LT, and the CS series, with a steel frame, for powers between 250 and 1,600 kW. For Romania we can quote motors from both series, plus special variants for explosion-risk areas or for wind generators.

Beyond the standard motor, Electro Adda makes a wide range of design variants: brake motors (FE, FECC series), slip-ring motors (CR ad anelli series), flameproof motors in ATEX variants according to the manufacturer's documentation, water-jacket-cooled motors, asynchronous generators for wind turbines and small hydroelectric plants, motors for conveyor rollers (motorulli), a series dedicated to high temperatures and one for the marine environment.

For installations in Romania, for example generators for wind and hydro turbines or naval applications, Electro Adda makes sense where a specific design variant (explosion-proof, with brake, water-cooled) is needed on a medium-power motor, not necessarily the maximum power available in the catalogue.

What do we supply from the Electro Adda range?

ProductDescription
C series asynchronous motorsStandard motors with an aluminium frame, in IEC sizes from 63 to 355LT, covering powers between 0.05 and 250 kW. This is the base range for general industrial applications, also available in a flameproof variant for explosion-risk areas or with an integrated brake (FE, FECC).
CS series asynchronous motorsMotors with a steel frame, for powers between 250 and 1,600 kW, in sizes from 355L to 560, intended for installations where the aluminium C series no longer covers the power or mechanical strength required.
Slip-ring motors (ad anelli)Wound-rotor variant, CR series, for heavy-start applications or speed control through rotor resistors.
Generators for wind and hydroelectric turbinesAsynchronous generators with a squirrel-cage rotor, derived from the standard motor platform, adapted to run as a generator on small wind turbines and small hydroelectric plants, an application distinct from the rest of the range, which is aimed at drive motors.

Why Electro Adda?

  • Multiple design variants documented in the manufacturer's documentation, from the standard motor to a wind generator or a conveyor-roller motor
  • Flameproof variants for explosion-risk areas, according to the manufacturer's documentation
  • Annual output: over 110,000 motors delivered per year
  • CS series with a steel frame for powers up to 1,600 kW, beyond the typical range of the aluminium motor
  • Variant dedicated to generators for wind turbines and small hydroelectric plants (G series)

Which Electro Adda codes and series are requested most often?

CodeDescription
Serie CAluminium motors, 0.05-250 kW, frame 63-355LT
Serie CSSteel motors, 250-1,600 kW, frame 355L-560
Serie CR (ad anelli)Slip-ring motors, wound rotor
Serie FESelf-braking motors (integrated brake)
Serie FECCSelf-braking motors, FECC series
Serie FECCLSelf-braking motors, FECCL series
Serie PEFlameproof motors, variants
Serie WWater-jacket-cooled motors
Serie GGenerators for wind and hydroelectric turbines
Motori per motorulliMotors for conveyor rollers
Serie TH-MARMotors for marine applications
Motori alte temperatureMotors for high operating temperatures
Motori IP23Motors with IP23 protection, open ventilation

Where is Electro Adda equipment used?

  • Renewable energy — generators for wind turbines and small hydroelectric plants
  • Explosion-risk areas — flameproof motors (PE series)
  • Heavy duty — steel-frame motors (CS series), for heavy loads
  • Marine — motors with design variants for the naval environment
  • General industry — standard C series motors for industrial drives

How do we supply Electro Adda in Romania?

For Electro Adda we work from the manufacturer's technical documentation, and availability is checked on each request. We supply the motors to order, usually in 1–4 weeks for the aluminium C series; for the steel CS series the lead time can be longer, depending on the specifications. For a quotation, the customer must state the series wanted (C, CS, CR, FE, etc.), the power, the frame size and, where relevant, the certification requirement (ATEX, marine). We confirm availability in the quotation — for the high powers of the CS series, production is usually to a firm order, confirmed by the factory in Italy.

The frame-size code for each power rating of the C or CS series is confirmed from the manufacturer's catalogue on each quotation.

Frequently asked questions about Electro Adda

What does Electro Adda make?

Electro Adda makes three-phase asynchronous electric motors, in series from 0.05 kW to 1.6 MW, in an aluminium frame (C series) or steel frame (CS series), plus brake variants, flameproof variants for explosion-risk areas (according to the manufacturer's documentation), water-cooled variants and generators for wind turbines or small hydroelectric plants.

What is the difference between the C series and the CS series at Electro Adda?

The C series has an aluminium frame and covers lower powers, from 0.05 to 250 kW, for IEC sizes between 63 and 355LT. The CS series, with a steel frame, takes over the high-power range, between 250 and 1,600 kW, for sizes from 355L to 560, where mechanical strength becomes more important.

What is the Electro Adda CR series?

The CR series is the slip-ring (wound-rotor) variant, for heavy-start installations, where controlling the starting current through rotor resistors reduces the load on the network.

Do you supply Electro Adda motors in Romania and how fast?

Yes, we supply Electro Adda motors to order, usually in 1–4 weeks from confirmation of the series and frame size requested. For the high-power CS series, the lead time is confirmed only after availability is checked at the factory in Italy.

How do I request a Electro Adda quotation?

Send the Electro Adda code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Electro Adda S.p.A. (manufacturer documentation)