Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

ELORA supplier in Romania

For ELORA we quote 2179 and 2070 series torque wrenches, 2601 and 2602 torque multipliers, ring and combination wrenches and OMS assortments; we need the torque range, the drive and the conformity document required.

Founded in 1924 · Headquarters: Remscheid, Germany

Request a quote

Who is ELORA and what does it make?

ELORA is a German hand tool factory in Remscheid, founded in 1924 and which has become, over more than a hundred years, a manufacturer with an international presence. The programme covers open-end, ring and combination wrenches, sockets and ratchets, torque wrenches and torque multipliers, screwdrivers, pliers, striking tools, pneumatic tools, measuring and control tools, as well as assortments organised in modules and in tool trolleys.

Torque wrenches are the area with a well-defined technical identity. Each manual wrench leaves the factory together with a declaration of conformity according to DIN EN ISO 6789:2017, part 1; on request a calibration certificate according to part 2 can also be issued, and the in-house torque laboratory checks and adjusts the tools. The standard control interval is 12 months or 5,000 cycles, according to ISO 6789. The codes 2179 (wrench with vernier scale), 2070 and 2080 designate families of torque wrenches, and 2601 and 2602 are torque multipliers with planetary gearing.

For industrial maintenance in Romania, the range is relevant wherever hand tools must be set, calibrated and tracked periodically: machinery upkeep, automotive and agricultural work, assembly, metrology laboratories and workshops that work to documented tightening procedures. A workshop that keeps a record of its wrenches can ask for the declaration of conformity with each delivery, and for critical work a calibration certificate with measurement uncertainty.

What do we supply from the ELORA range?

ProductDescription
Click torque wrenchesAdjustable torque wrenches, with audible and tactile signalling, with a vernier or a multiple scale (Nm, kgm, in-lb, ft-lb). The 2179 series covers 4–335 Nm; there are versions with a value locking safety (2179-S) and with higher ranges.
Torque multipliersMultipliers with planetary gearing, hardened gear wheels, permanent internal lubrication and interchangeable drive heads, for tightening in both directions. Models 2601 and 2602 are intended for static actuation only. For 2601 the stated accuracy is better than ±5 %, and for 2602 better than ±4 %.
Open-end, ring and combination wrenchesOpen-end, ring, double ring and combination wrenches, hook wrenches and DIN wrenches, plus striking wrenches and wrenches for steel construction, in different sizes and profiles for everyday workshop use.
Sockets, ratchets and OMS assortmentsSockets with drives from 1/4 to 1 inch, ratchets and socket wrenches, supplied individually, in sets in a metal case or as a module for the OMS assortment system and for tool trolleys.

Why ELORA?

  • DIN EN ISO 6789:2017 (part 1) declaration of conformity with each manual torque wrench — the tools leave the factory with the document ready
  • The company's in-house torque laboratory, for checking and adjusting the tools — the wrenches can be checked periodically
  • Click torque wrenches tested over 8,000 cycles — a long time between two adjustments
  • Torque multipliers with planetary gearing (2601, 2602) — high tightening torques without excessive manual force, for static actuation
  • Wide programme of hand tools and assortments in modules — wrenches, sockets, pliers and screwdrivers in the same product family

Which ELORA codes and series are requested most often?

CodeDescription
2179Torque wrench with vernier, 4–335 Nm
2179-S2179 wrench with a safety cap for the set value
2185Click torque wrench
2130–2160Series of click torque wrenches
2070Click torque wrench, high-capacity family
2070-1000¾ inch torque wrench, range 200–1000 Nm
2080-2100Click torque wrench
2601Torque multiplier with planetary gearing
2602Torque multiplier with a single planetary stage
OMSModular assortment system for hand tools
Chei combinateCombination open-end/ring wrenches, programme by size
Striking wrenchesStriking ring wrenches for steel construction

Where is ELORA equipment used?

  • Industrial maintenance — controlled tightening on machinery and installations
  • Automotive and utility vehicles — torque wrenches and special tools for the workshop
  • Metrology laboratories — checking and calibration of wrenches
  • Assembly and steel construction — striking wrenches, ring wrenches and multipliers
  • Aeronautics and precision engineering — tightening with torque documentation

How do we supply ELORA in Romania?

We can quote from the ELORA programme torque wrenches, torque multipliers, wrenches and sockets, pliers and assortments in modules. For hand tools the lead time is 24–72 h when the item is in stock, locally or at the supplier, and otherwise the tools are supplied to order, usually 1–4 weeks. For a quotation we need the tool code, the torque range and the drive (for example 1/2 inch), and whether a declaration of conformity or a calibration certificate is needed. For sets and trolleys, tell us the contents you want or send a photo of the existing assortment.

Calibration certificates for the wrenches supplied are outside our offer, and verification reports are handled on a separate request, with additional time.

Frequently asked questions about ELORA

What does ELORA make?

ELORA has made industrial-quality hand tools in Remscheid, Germany, since 1924: open-end, ring and combination wrenches, sockets, torque wrenches, torque multipliers, screwdrivers, pliers, striking and pneumatic tools, plus assortments and tool trolleys.

How do I choose a torque wrench by torque range?

It is chosen so that the required torque falls in the middle part of the scale, not at the ends. The drive (1/4, 3/8, 1/2, 3/4 or 1 inch), the working direction and the unit of measurement also matter. Send us the tightening torque from the procedure and the bolt concerned, so that we indicate the suitable series.

Do you supply ELORA tools in Romania, and within what lead time?

Yes, supplied to order. ELORA wrenches and tools can ship in 24–72 h when the item is in stock, locally or at the supplier, and those ordered by code in about 1–4 weeks. Trolleys, large sets and special tools can have a longer lead time, confirmed in the quotation.

Can I replace an old torque wrench with an ELORA one?

Possibly, but only after matching the range, the drive and the length. Interchangeability is established from the data. Send us the code or marking of the old wrench, the torque range from the procedure and the accessories used, so that we check the corresponding version.

What do I need to state for a quotation on torque wrenches with a certificate?

State the series or range desired, the drive and whether the declaration of conformity, standard for each wrench, is enough, or you need a calibration certificate with measurement uncertainty, according to part 2 of the standard. The quantity and the lead time needed help us with the estimate.

How do I request a ELORA quotation?

Send the ELORA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: ELORA – Werkzeugfabrik GmbH (manufacturer documentation)