Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Flexco supplier in Romania

For Flexco we quote EZP1, MHS, P-Type, CBS and CFC belt cleaners, Alligator and Flexco Bolt splicing systems, skirting and Flex-Lag lagging; for a quotation we need the belt width and speed, the pulley, the material and, for parts, the code from the cleaner.

Founded in 1907 · Headquarters: Downers Grove, Illinois, USA

Request a quote

Who is Flexco and what does it make?

Flexco is an American manufacturer of conveyor belt equipment, founded in 1907, based in Downers Grove, Illinois. The manufacturing programme covers belt cleaners (primary and secondary), mechanical belt splicing systems, maintenance tools, belt protection, impact beds and skirting systems for the loading zone, as well as lagging for pulleys. The purpose of all these products is the same: less material carried back on the belt and fewer stops for maintenance.

Primary cleaners, of the EZP1 type, are mounted on the drive pulley, under the material flow, and have a polyurethane blade: EZP1 works at belt speeds of up to 3.5 m/s, on belts from 300 to 1800 mm, with versions for high temperature and, in an ATEX version according to the manufacturer's documentation, for explosive areas. Secondary cleaners are mounted after the pulley and remove the fine material left on the belt: P-Type and T-Type are compact, MHS has segmented tungsten carbide blades for belts between 450 and 2400 mm, CBS has a continuous blade, and CFC uses flexible fingers for belts with ribs or transverse profiles.

For belt splicing there are hinged or solid plates for heavy-duty work (coal, cement, mining, aggregates) and Alligator systems with staples or rivets for light and medium belts, with nominal strength expressed in PIW, that is pounds per inch of belt width. Spare parts, such as cleaner blades, tensioners or pulley lagging, are identified by the cleaner series and the belt width.

What do we supply from the Flexco range?

ProductDescription
EZP1 primary cleanersCleaner mounted on the drive pulley, with a ConShear polyurethane blade that renews its edge as it wears. It is used on belts of 300–1800 mm, minimum pulley 250 mm, up to 3.5 m/s, with versions for high temperature and, in a version according to the manufacturer's documentation, for explosive areas.
MHS, P-Type, CBS and CFC secondary cleanersMounted right after the pulley or anywhere along the run. MHS has segmented tungsten carbide blades for belts between 450 and 2400 mm; P-Type is compact, for belts between 450 and 1800 mm; CBS has a continuous blade; CFC uses flexible finger blades.
Alligator and Flexco Bolt mechanical splicing systemsFasteners for conveyor belt ends: Alligator with staples, up to 35 kN/m, for light and medium belts, Alligator with rivets, between 52 and 350 kN/m, and Flexco Bolt hinged, whose splice is opened by removing the pin.
Skirting, impact beds and laggingEnclosed skirting (Enclosed Skirting 2.0) seals the loading zone and allows maintenance from outside the chute. Impact beds support the belt, and Flex-Lag pulley lagging, bonded or welded, provides the friction needed for drive.

Why Flexco?

  • EZP1 primary cleaners with polyurethane blade in four versions — standard, high temperature, very high temperature and a version for contact with chemicals or food
  • Tungsten carbide secondary cleaners (P-Type, MHS, FMS) — for fine material left after the pulley, with segmented blades tensioned independently
  • CBS with continuous blade and MHS in CEMA class 5 (classification of the American association of conveyor manufacturers) — cover wide belts of up to 2400 mm and speeds of up to 6 m/s
  • Alligator systems with staples or rivets, up to 350 kN/m — mechanical splicing for belts from light to heavy
  • Skirting and impact beds for the loading zone — protect the belt from impacts and limit dust and spillage

Which Flexco codes and series are requested most often?

CodeDescription
EZP1Primary cleaner with polyurethane blade, belts 300–1800 mm
EZP1 High-TempHigh-temperature version, yellow blade
EZP1TPrimary cleaner with twist tensioner
MHSHeavy-duty secondary cleaner, belts 450–2400 mm, CEMA class 5
P-TypeCompact secondary cleaner, belts 450–1800 mm
T-TypeCompact secondary cleaner for sticky material
Y-TypeSecondary cleaner with easy-to-replace blades
CBSSecondary cleaner with continuous carbide blade
CFCSecondary cleaner with flexible fingers, up to 2.5 m/s
FMSSecondary cleaner with independently tensioned carbide blades
Alligator StapleStaple splice, up to 35 kN/m
Alligator RivetRivet splice, 52–350 kN/m
Flexco Bolt HingedHinged splice, opened by removing the pin
Flex-Lag BondableBonded pulley lagging, in roll or pre-ordered
Flex-Lag Weld-OnWelded pulley lagging, pre-ordered
Enclosed Skirting 2.0Enclosed skirting for the loading zone

Where is Flexco equipment used?

  • Quarries, aggregates and mining — MHS cleaners and skirting on high-tonnage belts
  • Cement industry — mechanical splicing of heavy belts and cleaners on the drive pulley
  • Explosive atmosphere areas — EZP1 cleaners in the ATEX version, with FRAS blades (fire-resistant and anti-static)
  • Agriculture and food processing — light splices with staples and blades for food contact
  • Parcel sorting centres — splicing systems for light belts

How do we supply Flexco in Romania?

We can quote belt cleaners, replacement blades, Alligator and Flexco Bolt splicing systems, skirting and pulley lagging from Flexco. The products arrive to order, usually 1–4 weeks, and for special configurations, depending on the specification, the lead time may be longer. For a correct request we need the belt width, the speed, the pulley diameter, the existing splice type (mechanical or vulcanised), the material conveyed, the temperature and, for parts, the series or code from the cleaner.

The compatibility of a replacement blade with an installed cleaner is confirmed from the cleaner series and the belt width.

Frequently asked questions about Flexco

What does Flexco make?

Flexco makes conveyor belt equipment: primary and secondary cleaners, mechanical belt splicing systems (Alligator, Flexco Bolt), skirting and impact beds for the loading zone, as well as pulley lagging. All of them serve to stop material carried back on the belt and to shorten stops.

When is a primary cleaner needed, and when a secondary one?

The primary one is mounted on the drive pulley and removes most of the material carried back on the belt; the secondary one, mounted after the pulley, cleans the fine material left. For your belt we need the width, the speed, the material and the splice type, mechanical or vulcanised.

Do you supply Flexco products in Romania, and how fast?

Yes, Flexco cleaners and splices are brought in to order, usually in 1–4 weeks. For large or configured components, depending on the specification, the lead time may be longer. The date is confirmed in the quotation, once we know the belt width and the cleaner series.

Can I change the blade of an existing Flexco cleaner?

Yes, if we can identify the cleaner exactly. We need the series shown on the frame (for example EZP1 or MHS), the belt width and, if present, the blade code. A fit is not judged by width alone, because blades differ between series; we check against the data sent.

What data is needed for a quotation on a mechanical belt splicing system?

The belt thickness and type, the working tension in kN/m or PIW, the minimum pulley diameter, the belt width and whether it is a new or used belt. With these data the choice is made between the staple, rivet or pin-and-hinge versions.

How do I request a Flexco quotation?

Send the Flexco code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Flexco, Flexco Germany (manufacturer documentation)