Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

FPZ supplier in Romania

In the FPZ range we offer single-stage MS series side channel blowers, high-pressure two-stage blowers and packages with sound insulation and automation; we confirm the size from the model code (for example K03 or K75).

Founded in 1975 · Headquarters: Concorezzo, Italy

Request a quote

Who is FPZ and what does it make?

FPZ is an Italian manufacturer of side channel blowers and compressors, based in Concorezzo, near Milan. The company has specialised in one specific design principle — the side channel blower, a machine with no contact between the moving parts and the casing, with one or two rotors that generate pressure or vacuum by repeatedly accelerating the air in a peripheral channel. This simple design, without gears or internal lubricating oils, suits industrial applications where the air must be clean, with no traces of oil.

Single-stage blowers (MS series, with a single rotor) cover maximum flow rates from 55 to 1,024 m³/h at 50 Hz (up to 1,221 m³/h at 60 Hz), pressures up to 450 mbar and vacuum down to -350 mbar, depending on the model. For higher pressures, the two-stage series (MD and TD) compress the air in two successive stages and reach pressures of up to 650 mbar. FPZ also makes blowers resistant to high temperatures of the conveyed air or of the ambient environment, as well as versions with a stainless steel casing for corrosive or hygienic environments.

The rotor, with no dynamic seals subject to friction and no lubricating oil in contact with the conveyed air, reduces maintenance to a minimum — practically only periodic checks of the bearings and the suction filter. Low noise and the absence of significant mechanical vibration, compared with Roots blowers or piston compressors, make them suitable for noise-sensitive environments such as commercial premises or institutions. FPZ blowers are found in water treatment plants, pneumatic conveying of light granular materials, industrial vacuum packaging and chemical and pharmaceutical installations.

What do we supply from the FPZ range?

ProductDescription
MS Series Single-Stage Side Channel BlowersThe single-stage MS series blowers are the basic FPZ solution for moderate pressure or vacuum, with a single side channel rotor mounted directly on the electric motor shaft, with no gearbox or belt transmission. They cover discharge pressures of up to 450 mbar or vacuum of up to -350 mbar, with flow rates suited to aeration of small tanks, light pneumatic conveying and vacuum packaging. The compact design, with no lubricating oil in contact with the conveyed air, provides a clean air flow, suitable for general industrial applications where the investment in a Roots blower or a screw compressor is not justified.
High-Pressure Two-Stage BlowersFor applications that need higher pressures than a single-stage design can provide, FPZ makes two-stage blowers (MD and TD series), which compress the air in two successive stages and reach pressures of up to 650 mbar. They are used for aeration of deeper tanks in treatment plants, pneumatic conveying over longer distances and industrial applications where a single compression stage would not reach the required pressure.
Blowers for High Temperatures and Corrosive EnvironmentsThe FPZ range includes special versions, with materials and tolerances adapted for operation in environments with a high ambient temperature or for conveying air at a higher temperature than standard, situations common in the process industry or in applications installed in poorly ventilated spaces. For corrosive environments or those with increased hygiene requirements, stainless steel casing versions are available, suitable for the food, pharmaceutical or chemical industries. These versions keep the same simple and reliable side channel blower design, adapting only the materials of the components exposed to the aggressive environment.
Complete Packages with Sound Insulation and AutomationFor installations where noise level or integration into existing automation are project requirements, FPZ offers blowers mounted in sound-insulating enclosures, complete with suction filter, safety valve, pressure gauge and, optionally, a variable frequency drive for adjusting the air flow to the actual process demand. This complete configuration reduces installation time on site and ensures correct operation of the blower from commissioning, without further adjustment of individual accessories. It is the preferred solution for small and medium treatment plants, where the blower must be integrated directly into the existing aeration process automation.

Why FPZ?

  • Oil-free air — a design with no contact between rotor and casing, suited to contamination-sensitive applications
  • Minimal maintenance — no gears, belts or dynamic seals subject to rapid wear
  • Single-stage and two-stage range — covers both moderate pressures and applications requiring up to 650 mbar
  • Low noise and vibration — quieter operation than Roots blowers or piston compressors of equivalent power
  • Designs for demanding environments — high-temperature versions and stainless steel casings for corrosive environments
  • Wide applicability — from biological aeration in treatment plants to pneumatic conveying and industrial vacuum packaging

Which FPZ codes and series are requested most often?

CodeDescription
MSSide channel blower, one rotor, one stage, maximum flow rate 55–1,024 cubic metres per hour at 50 Hz
MDSide channel blower, one rotor, two stages, high pressure
TSSide channel blower, two rotors, one stage, high flow rate
TDSide channel blower, two rotors, two stages, maximum pressure
K03Model (size) available in the MS series
K04Model (size) available in the MS and TD series
K05Model (size) available in the MS, TS and TD series
K75Model (size) available in the MS series
R20Model (size) of the MD series (one rotor, two stages)
R30Model (size) of the MD series (one rotor, two stages)
R40Model (size) of the MD series (one rotor, two stages)
e11Model (size) available in the MS, MD, TS and TD series

Where is FPZ equipment used?

  • Wastewater treatment — biological aeration of tanks in municipal and industrial treatment plants
  • Pneumatic conveying — conveying light granular materials in industry
  • Industrial packaging — vacuum systems for handling and holding products
  • Food industry — applications that require clean, oil-free air
  • Chemical and pharmaceutical industry — air and vacuum applications
  • Biogas — air and vacuum applications

How do we supply FPZ in Romania?

We take orders for FPZ side channel blowers and compressors — the single-stage MS series, the high-pressure two-stage versions and the designs for temperature or corrosive environments — for treatment plants and industrial installations in Romania, through EU supply channels. Availability for each configuration is checked on request, and sizing is checked in the manufacturer's technical documentation. For a correct quotation, send us the air flow and the pressure or vacuum required by the application. Standard models can usually ship in 24–72 h when the item is in stock, locally or at the supplier, while complete packages with a sound-insulating enclosure and integrated automation usually arrive in 1–4 weeks to order.

Programming of the variable frequency drive on automated packages is defined from the exact process specifications, together with the project engineer.

Frequently asked questions about FPZ

What is the difference between the MS and TS series from FPZ?

The MS series has a single rotor and a single compression stage, with maximum flow rates between 55 and 1,024 cubic metres per hour at 50 Hz, while the TS series uses two rotors on a single stage, which raises the flow rate significantly, to over 2,000 cubic metres per hour. The choice depends on the application's air demand and the space available for installation.

Do you supply FPZ blowers to order for customers in Romania?

Yes, we supply side channel blowers of the MS, MD, TS or TD series to order, based on the model confirmed from the FPZ technical documentation. FPZ blowers are sourced case by case, to order, usually within 1–4 weeks. We recommend sending the required flow rate and pressure so the model can be identified correctly.

What information is needed for a quotation request for an FPZ blower?

You need the required air flow in cubic metres per hour, the desired working pressure or vacuum and the supply voltage available at the installation site. For machinery that is already installed, the serial number stamped on the casing helps us find the right equivalent, whether MS, MD, TS or TD.

What is the FPZ e11 model?

e11 is a model (size) available in the MS, MD, TS and TD series; flow rate and pressure depend on the chosen series. We confirm the exact parameters from the FPZ technical data sheet before the order.

How do I request a FPZ quotation?

Send the FPZ code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: FPZ, FPZ S.p.A. (manufacturer documentation)