Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Gestra Flowserve supplier in Romania

For GESTRA products we quote from the code on the nameplate; availability and lead time are confirmed in the quotation.

Founded in 1902 · Headquarters: Bremen, Germany

Request a quote

Who is Gestra Flowserve and what does it make?

GESTRA is a German manufacturer specialising in steam and condensate management in industrial installations, based in Bremen. For over a century, the company has developed equipment for three essential functions of a boiler house or steam network: discharging condensate without loss of live steam, controlling the water level in boilers, and treating feed water through continuous and intermittent blowdown systems.

GESTRA steam traps cover all the usual operating principles — float (UNA series, for heat exchangers and vacuum systems, with low working pressures), thermodynamic (DK series, compact, for small load variations), diaphragm (MK series, for saturated steam) and bimetallic (BK series, for saturated and superheated steam). For boiler level control, the NRG series conductivity sensors and the associated control systems provide protection against dry running, a major risk of damage for any steam boiler. Continuous and intermittent blowdown systems remove the sludge and salts that build up in the boiler, extending the service life of the installation and reducing the consumption of chemical treatment.

What sets GESTRA apart is its system approach: it does not just sell an isolated steam trap, but offers complete solutions for recovering condensate and the associated heat energy, with digital monitoring through sensors that give early warning of a blocked trap or one that lets steam pass. The products are found in heating and power plants, refineries, paper mills, the food industry and wherever steam is used as a process heating medium. For a boiler operator, a correctly sized GESTRA network means fewer steam losses, lower fuel consumption and a reduced risk of damage caused by low water level.

What do we supply from the Gestra Flowserve range?

ProductDescription
UNA series float steam trapsUNA series float traps discharge condensate continuously, as soon as it forms, which makes them suitable for applications with variable and large condensate flows — heat exchangers, autoclaves, industrial dryers. The stainless steel spherical float operates the discharge valve directly, with no heat-sensitive components that could delay the response to sudden load changes. The working pressure and the condensate flow depend on the model; the UNA series is intended for installations with low working pressures. The bodies are available in cast iron, steel or stainless steel, and the internal mechanism can be replaced without removing the trap from the pipe, which reduces downtime during servicing.
MK series diaphragm steam trapsMK series traps are steam traps with a highly responsive diaphragm regulator, for saturated steam installations.
NRG series boiler level sensors and control systemsNRG systems use conductivity electrodes mounted directly on the boiler to detect the water level and prevent dry running, a frequent cause of serious damage to steam boilers. The signal is sent to a controller that stops firing or feeding according to the set thresholds — low alarm level, low cut-off level and, optionally, high level. The construction with no moving parts inside the boiler eliminates the risk of mechanical jamming, an important advantage over conventional floats. The electrodes are supplied in different lengths to cover boilers of various heights and can be integrated with existing automation through analogue outputs or relay contacts.
Continuous and intermittent blowdown systemsContinuous blowdown systems permanently extract a small flow of water from the high-salt-concentration zone of the boiler, keeping the water conductivity below the permitted limits and reducing the need for manual intermittent blowdown. Intermittent blowdown valves periodically remove the sludge deposited at the bottom of the boiler, preventing local overheating of the plate and the formation of hard deposits. Complete GESTRA systems include flash vessels for recovering heat from the blown-down water, reducing the energy losses associated with this mandatory water-quality maintenance process. They are sized according to the boiler capacity and the quality of the feed water, with fully automated blowdown cycles.

Why Gestra Flowserve?

  • A range for steam and condensate — steam traps, level control and blowdown systems from a single supplier
  • Long-term proven reliability — equipment that runs for decades in boiler houses with continuous operation
  • Digital monitoring available — sensors that give early warning of a faulty steam trap, before large steam losses occur
  • Wide coverage of pressures and temperatures — from low-pressure installations to superheated steam, depending on the series chosen
  • Direct reduction of operating costs — recovering condensate and the associated heat energy lowers fuel consumption

Which Gestra Flowserve codes and series are requested most often?

CodeDescription
AKAutomatic steam trap for air and condensate discharge at start-up
BKBimetallic steam trap for superheated steam and heat tracing lines
DKCompact thermodynamic steam trap for thermal loads with small variations
GMFManifold system for steam distribution and condensate collection
MKDiaphragm steam trap for saturated steam and heat tracing lines
SMKThermostatic steam trap for sterile applications in the pharmaceutical industry
UNAFloat steam trap for steam-controlled heat exchangers
UNA 25-PK-PSFloat steam trap with pumping function for variable loads
VKVisual or electronic steam trap monitoring system
VKPSteam trap testing equipment for reducing steam losses

Gestra Flowserve series with English pages

Where is Gestra Flowserve equipment used?

  • Heating and power plants — steam boilers, turbines, district heating networks
  • Refineries and petrochemicals — process steam lines and condensate recovery
  • Paper and pulp industry — cylinder dryers, heat presses
  • Food and beverage industry — sterilisation, autoclaves, thermal processes
  • Textile industry — dye works and steam finishing
  • Hospitals and institutional buildings — sterilisation and centralised steam heating
  • Chemical industry — heat exchangers and steam-heated reactors

How do we supply Gestra Flowserve in Romania?

We supply GESTRA steam and condensate management equipment — float and thermodynamic steam traps, NRG level sensors and continuous and intermittent blowdown systems — to heating plants and process factories in Romania, through EU supply channels. Availability is confirmed in the quotation, and each suitable model is checked in the manufacturer's technical documentation. To identify the compatible steam trap correctly, send us the condensate flow, the working pressure and the model already installed on the pipe, if you know it. Steam traps and common wear parts can arrive in 24–72 h when the item is in stock, locally or at the supplier, otherwise usually in 1–4 weeks to order; complete level control or blowdown systems are complex systems, with lead times that can be longer depending on the specification.

For software configuration of the digital monitoring and for warranty service, send us the requirement and we will come back with a specific answer.

Frequently asked questions about Gestra Flowserve

Which GESTRA steam trap should I choose for saturated steam with small load variations?

The DK series, of thermodynamic type, is recommended for heating processes with small fluctuations in thermal load, being compact and easy to maintain. For more variable loads or larger condensate capacities, a diaphragm trap from the MK series or a float trap from the UNA series is more suitable.

What is the difference between GESTRA UNA and MK steam traps?

The UNA uses a float that follows the condensate level and opens continuously, making it suitable for heat exchangers with large and variable loads. The MK is a thermostatic diaphragm trap that works cyclically and is recommended for saturated steam, heat tracing lines and applications where the installation space is limited.

What is the GESTRA SMK steam trap used for?

SMK is a thermostatic steam trap suited to sterile and aseptic applications in the pharmaceutical industry: pure and ultrapure steam and CIP (cleaning in place) and SIP (sterilisation in place) processes. Pressure and connection are determined from the manufacturer's documentation; the exact version is confirmed in the quotation.

What information should I send for a GESTRA steam trap quotation?

It helps to state the steam pressure, the estimated condensate flow and the type of application (heating, sterilisation or general industrial process). These details allow the correct choice between a float trap from the UNA series, a thermodynamic one from the DK series or a sterile version from the SMK series for pharmaceutical applications.

How do I request a Gestra Flowserve quotation?

Send the Gestra Flowserve code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: GESTRA, GESTRA GmbH (manufacturer documentation)