GW Instek supplier in Romania
Oscilloscopes, power supplies and laboratory instruments
Who is GW Instek and what does it make?
GW Instek (Good Will Instrument Co., Ltd.) is a Taiwanese manufacturer of electronic measurement and test instruments. The range covers GDS-2000E series digital oscilloscopes, ASR-6000 series AC/DC power supplies, PSW and GPP series programmable DC power supplies, DAQ-9600 data acquisition systems and PEL-5000G electronic loads, alongside spectrum analysers, signal generators, digital multimeters and LCR testers. From the GW Instek portfolio we can quote bench instrumentation for technical laboratories and test lines.
GW Instek mainly covers laboratory bench instrumentation — oscilloscopes, programmable power supplies and data acquisition systems — used for electrical safety tests, battery testing, Industry 4.0 applications and automotive power conversion tests.
For service laboratories, quality control or test lines in Romania, the GW Instek range is an option for bench instrumentation in standard laboratory tests.
What do we supply from the GW Instek range?
| Product | Description |
|---|---|
| GDS-2000E Series Digital Oscilloscopes | Bench digital oscilloscopes, used for electronics troubleshooting, quality control and product development. For a quotation we need the frequency bandwidth required and the number of channels wanted. |
| ASR-6000 Series AC/DC Power Supplies | Power supplies that combine AC and DC outputs, used for testing electronic equipment that must be checked on both mains supply and direct current. |
| PSW and GPP Series Programmable DC Power Supplies | DC power supplies with one or more programmable channels, used for the controlled powering of circuits during product development or testing. The correct selection depends on the maximum voltage and current required. |
| DAQ-9600 Data Acquisition Systems | Equipment for the automatic collection of data from sensors or instruments in automated tests, relevant for Industry 4.0 type test lines. |
| PEL-5000G Electronic Loads | Programmable electronic loads, used for testing power supplies, batteries or other equipment that must be checked under an electronically controlled load. |
Why GW Instek?
- Wide range of bench digital oscilloscopes, including the GDS-2000E series, for the laboratory
- Programmable power supplies across several ranges, from single-channel DC to AC/DC (ASR-6000 series)
- DAQ-9600 data acquisition systems and PEL-5000G electronic loads for automated tests
- Stated applicability to electrical safety testing, batteries and power conversion
Which GW Instek codes and series are requested most often?
| Code | Description |
|---|---|
| GDS-2000E | Bench digital oscilloscope, 70–200 MHz, 2 or 4 channels, from the GDS-2000E series |
| GDS-2204E | Bench digital oscilloscope, 200 MHz, 4 channels, from the GDS-2000E series |
| GDS-3502 | 2-channel digital oscilloscope, 500 MHz, from the GDS-3000 series |
| GDS-3504 | 4-channel digital oscilloscope, 500 MHz, from the GDS-3000 series |
| GDS-912 | Portable digital oscilloscope, from the GDS-900 range |
| GDS-912G | Portable digital oscilloscope, G variant of the GDS-900 range |
| GDS-1000B | Entry-level digital oscilloscope, GDS-1000B series |
| MDO-2000A | Mixed-domain oscilloscope, 2000A series |
| MSO-2000E | Mixed-signal oscilloscope, 2000E series |
| MDO-2000E | Mixed-domain oscilloscope, 2000E series |
| PPH-1503D | Laboratory DC power supply, PPH series |
| AFG-3032 | Arbitrary function generator, AFG-3000 series |
| PEL-3041 | Laboratory DC electronic load, PEL-3000 series |
| GSP-9330 | Spectrum analyser, GSP-9330 series |
| DAQ-9600 | Data acquisition system, DAQ-9600 series |
| GDM-8351 | Bench digital multimeter, GDM-8351 series, previous generation (discontinued); for equipment in service, consumables and spare parts are usually requested |
Where is GW Instek equipment used?
- Electrical safety testing — Hi-Pot and insulation resistance verification
- Battery industry — charge and discharge testing
- Industry 4.0 — data acquisition for automated lines
- Automotive — power conversion tests for electrical components
- Service laboratories — bench instrumentation for diagnostics and repairs
How do we supply GW Instek in Romania?
For GW Instek we work with the product categories in the manufacturer's documentation; we state the lead time and availability in the quotation. We supply GW Instek instruments made to order, through EU supply channels, usually in 1–4 weeks from order confirmation. For a correct quotation, we need the exact model or, if you do not know it, the test parameters required — voltage, current, frequency bandwidth. We check stock availability for each model in this extensive instrument catalogue on request.
Calibration and the calibration certificate for a GW Instek instrument supplied to order are those offered by the manufacturer in the standard version.
Frequently asked questions about GW Instek
What is the difference between the GW Instek GDS-2000E and GDS-3000 series oscilloscopes?
The GDS-2000E series (70, 100 and 200 MHz, with 2 or 4 channels) covers general troubleshooting and verification needs in the laboratory, while the GDS-3000 series offers higher bandwidths, up to 500 MHz, also with 2 or 4 channels. The choice depends on the number of signals that must be followed in parallel on the same screen.
What is an MDO oscilloscope at GW Instek?
MDO stands for mixed-domain oscilloscope, that is an instrument that combines the classic oscilloscope function with spectrum analysis in the same unit, useful when both the time-domain waveform and the frequency components of a signal must be checked. The MDO-2000A and MDO-2000E series are frequently used for troubleshooting radio-frequency circuits.
Do you supply GW Instek instruments in Romania?
Yes, GW Instek instruments, from oscilloscopes to power supplies or multimeters, arrive to order usually in 1–4 weeks; we do not keep such a wide selection of models on the shelf. To prepare a quotation, the exact code of the device or the intended measurement application is useful to us.
What is the difference between the PPH-1503D power supply and the PEL-3041 electronic load from GW Instek?
The PPH-1503D is a laboratory DC power supply, used to provide controlled voltage and current to a circuit under test, while the PEL-3041 is an electronic load, which simulates a variable consumer in order to test the behaviour of a power supply or a battery. The two instruments are often used together for testing power supplies.
How do I request a GW Instek quotation?
Send the GW Instek code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: GW Instek, Good Will Instrument Co., Ltd. (manufacturer documentation)