IBO supplier in Romania
For IBO we quote 4" SD and 6" ISP borehole pumps, IPTL in-line pumps, MHI INOX surface pumps and KBFU AUTO sludge pumps; we need the type from the nameplate, the voltage and the borehole diameter or the duty point.
Who is IBO and what does it make?
IBO is a Polish pump brand for clean water and wastewater: submersible pumps for 3 to 6 inch boreholes, in-line circulation pumps for hot and cold water, multistage surface pumps, sludge pumps for drainage and wastewater pumps. The brand's manufacturer has operated in Poland since 1999. For a quotation, send us the exact type from the nameplate, for example 4" SD 5-20, the supply voltage and the flow and head required.
The 4" SD series comprises three-phase multistage submersible pumps, 400 V, 98 mm in diameter, for boreholes with an inside diameter of at least 115 mm. The models cover flows of 80–500 l/min, heads of up to 169 m and powers from 0.75 to 7.5 kW. The 6" ISP series is built entirely of stainless steel and uses 4" motors at low powers and 6" motors from 7.5 kW upwards, with thermal protection in the winding. IPTL circulation pumps work with water between 0 and 90 °C, at pressures of up to 16 bar, with cast iron body and IE3 motor with IP55 protection.
IBO pumps appear in borehole water supply for farms, halls and construction-site setups, in irrigation, in pressure boosting in tall buildings, in heating and air-conditioning circuits and in removing water from excavations. The KBFU AUTO sludge pump has an integrated controller with level probe and a cooling jacket, so it can operate without being completely submerged. When replacing a borehole pump, what matters is the borehole diameter, the installation depth and the real yield of the source, not just the motor power.
What do we supply from the IBO range?
| Product | Description |
|---|---|
| 4" SD | Three-phase multistage submersible pumps, 400 V, 98 mm in diameter, for boreholes with a minimum inside diameter of 115 mm. The series covers flows of 80–500 l/min and heads of up to 169 m, with motors of 0.75–7.5 kW, for farms, industrial sites and irrigation. |
| 6" ISP | 6" multistage submersible pumps, built entirely of stainless steel, for raw water from boreholes. Small models use 4" motors, and from 7.5 kW upwards 6" motors, with thermal protection in the winding. They are used for water supply, irrigation and drainage. |
| IPTL | In-line pumps for cold and hot water, used for pressure boosting in tall buildings, in HVAC and heating installations, for boiler feed and in industrial circuits. They work at 0–90 °C and up to 16 bar, with cast iron body and rotor and IE3 motor. |
| KBFU AUTO | Submersible sludge pump with integrated controller and level probe with adjustable start threshold. The cooling jacket and the wide impeller slot allow work in water with sand and sediment without full submersion, for removing water from excavations, wells and underground spaces. |
Why IBO?
- Borehole pumps in the usual diameters — IBO 3", 3.5", 4" and 6" series cover boreholes from narrow ones to high-yield ones
- Wide range in the 4" SD series — 80–500 l/min and up to 169 m head, with three-phase motors of 0.75–7.5 kW
- Stainless steel construction in the 6" ISP — the pump is made entirely of stainless steel, suited to continuous operation at high flows
- Circulation and pressure boosting — IPTL pumps work at 0–90 °C and up to 16 bar, with IE3 motor and IP55 protection
- Automatic drainage — KBFU AUTO starts and stops by itself from the integrated level probe, useful in excavations with variable water level
Which IBO codes and series are requested most often?
| Code | Description |
|---|---|
| 4" SD 5-20 | 4" multistage submersible pump, 2.2 kW, 400 V |
| 4" SDM | 4" submersible pumps with single-phase motor |
| 3.5" SDM | 3.5" submersible pumps for narrow boreholes |
| 4" ISP | 4" multistage submersible pumps |
| 6" ISP 60-7 | 6" stainless steel submersible pump, 15 kW, 400 V |
| 3" IBQ | 3" submersible pumps |
| 4" IBQ IVR | 4" submersible pumps from the IBQ series |
| IPTL 100-15 | In-line pump for cold and hot water, 4 kW, 400 V |
| IPML | In-line circulation pumps |
| OHI | Circulation pumps for heating circuits |
| MHI 2200 INOX | Self-priming multistage surface pump, AISI 304 rotor |
| KBFU AUTO 50-0,48 | Sludge pump with controller and level probe, 230 V |
| WQF | Submersible pumps for wastewater |
Where is IBO equipment used?
- Agriculture — borehole water supply and irrigation with 4" SD and 6" ISP pumps
- Construction — removing water from excavations with KBFU sludge pumps
- Buildings and HVAC installations — pressure boosting and hot water circulation with IPTL pumps
- Industry — process water supply from own sources
- Wastewater — pumping in collection stations and tanks
How do we supply IBO in Romania?
We can quote IBO borehole pumps (4" SD, 4" SDM, 4" ISP, 6" ISP), IPTL and IPML in-line pumps, MHI INOX surface pumps, KBFU sludge pumps and wastewater pumps, plus spare parts for these series. For an accurate quotation send us the complete type from the nameplate, the voltage (230 V or 400 V), the borehole diameter and the installation depth or, for circulation pumps, the flow and head required. IBO pumps come through EU supply channels: to order, usually in 1–4 weeks, and 24–72 h when the item is available locally or at the supplier.
IBO pumps are for clean water, water with sand and wastewater; for corrosive liquids or temperatures above the limit of the series we propose other series, based on the process data you send us.
Frequently asked questions about IBO
What types of pumps does IBO make?
Under the IBO brand are made submersible pumps for 3", 3.5", 4" and 6" boreholes (SD, SDM, ISP and IBQ series), IPTL and IPML in-line pumps for hot and cold water, MHI multistage surface pumps, KBFU sludge pumps and wastewater pumps. All work with clean or laden water, not with aggressive chemical liquids.
How do I choose an IBO 4" SD borehole pump?
What matters is the inside diameter of the borehole, minimum 115 mm for 4" SD, the dynamic water level, the installation depth and the yield of the source. The series runs from 80 to 500 l/min and up to 169 m head, at 400 V. Send us the borehole data and the consumption wanted, and we will choose the model.
How long until we receive an IBO pump?
The lead time is 24–72 h when the pump is available locally or at the supplier; otherwise we bring it in to order, through import from the EU, usually in 1–4 weeks. For the large 6" ISP series, depending on specification, the lead time may be longer, and the exact date appears in the quotation.
Can I put an IBO pump in place of a borehole pump of another make?
In most cases yes, if the pump diameter fits in the borehole and the duty point matches. We need the nameplate of the old pump, its curve or its flow and head, the voltage, the discharge pipe diameter and the type of coupling to the motor; with these we check the right IBO model.
What do I send for a quotation on IPTL circulation pumps?
Send the flow and head required, the water temperature, which for IPTL can be between 0 and 90 °C, the pressure in the installation (up to 16 bar), the connection diameter and the voltage available. If you are replacing an existing pump, the code from the nameplate is usually enough.
How do I request a IBO quotation?
Send the IBO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Dambat (manufacturer documentation)