Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

IMAO supplier in Romania

Pullfix clamps, quick-fastening elements and finger changers for robots

Founded in 1961

Request a quote

Who is IMAO and what does it make?

IMAO Corporation is a Japanese maker of standard machine elements and components for workholding fixtures, active since 1961. From 1967 it introduced standard elements of this kind in Japan, and from 1983 it has made the Block Jig System modular fixture system. Certifications are given in the manufacturer's documentation.

The range divides into three directions. Workpiece clamping in 5-axis machining is done with the Pullfix system, a modular clamp that pulls the workpiece down with a positioning repeatability of 0.005 mm, leaving the tool access from five sides. For automation, MotionAct Finger Changers (Tsume Changer in the Japanese catalogue) allow the fingers of a robot gripper to be changed by simple arm movements. The third direction is quick-fastening elements: One Touch Fasteners, with quarter-turn or ball operation, One Touch Push Lock clamps and shaft clamps, which replace screws on fixtures and panels.

IMAO products shorten changeover times. They are ordered by code, and the right choice requires the diameter of the clamping pin, the clamping force and the mounting type.

What do we supply from the IMAO range?

ProductDescription
Pullfix (Modular Pull Clamping System)Modular clamping system for 5-axis machining, with a repeatability of 0.005 mm. It includes standard clamping modes and modes that compensate for workpiece deformation after heat treatment or roughing.
MotionAct Finger Changer (Tsume Changer)Mechanical coupling that allows the fingers of a robot gripper to be locked and unlocked by arm movements. The ball and cone mechanism holds the pin until release; the mounting plate adapts to different grippers.
One Touch FastenersTool-free quick-fastening elements: quarter-turn, ball and pin versions, for fixture plates, panels and covers. The spring maintains a constant force and avoids clamping too loosely or too tightly.
One Touch Push Lock Clamps / Shaft ClampsClamps with handle for flat bars, round shafts and linear guides in position or angle adjustments. The heavy-duty version gives a force of 1100 N, and the one with a safety lock blocks the handle in the clamping position.

Why IMAO?

  • Repeatability of 0.005 mm with Pullfix — the double contact on cone and face repeats the workpiece position at every clamping
  • Tool access from 5 sides — the clamp pulls the workpiece down and leaves free space for the tool
  • Gripper finger change without a dedicated gripper — the Finger Changer uses any gripper that accepts the clamping pin
  • Constant spring clamping force — quick fastening does not depend on the torque applied by the operator
  • Quality and environmental certifications stated in the manufacturer's documentation — useful information for a supplier audit

Which IMAO codes and series are requested most often?

CodeDescription
PullfixModular clamping system for 5 axes, repeatability 0.005 mm
Tsume Changer / MotionAct Finger ChangerFinger changer for robot grippers
One Touch Fasteners (quarter turn)Quick-fastening elements with quarter-turn operation
One Touch Fasteners (ball lock)Quick-fastening elements with ball locking
Air Lock FastenersPneumatic fastening elements for frequent changeovers
One Touch Push Lock ClampClamp with handle for bars, shafts and guides
One Touch Shaft ClampQuick clamp for shafts and axles
Gaikei ClampExternal quick-clamping clamp
Block Jig SystemStandard modular fixture system

Where is IMAO equipment used?

  • 5-axis CNC machining — workholding fixtures with high repeatability
  • Robot automation — quick change of gripper fingers
  • Packaging and printing lines — quick adjustments at format change
  • Semiconductors, food and pharmaceutical — pneumatic fastening, corrosion-resistant versions
  • Inspection and gauging fixtures — quick-opening plates and covers

How do we supply IMAO in Romania?

We can quote IMAO components supplied to order. It can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise, supplied to order, typically 1–4 weeks, and for configured systems (for example Pullfix sets with base plates) it may be longer. For a quotation, we need the product code or the catalogue series, the diameter and length of the clamping pin or screw, the desired clamping force, the material of the workpiece or plate and the number of clamping points. For robots we also need the make of the gripper, for the mounting plate.

Designing workholding fixtures or robot cells is outside our offer, and compatibility with a gripper is established from its drawing.

Frequently asked questions about IMAO

What does IMAO make?

IMAO, a Japanese company since 1961, makes standard machine and fixture elements: the Pullfix system for clamping workpieces on 5 axes, finger changers for robot grippers, One Touch quick-fastening elements and clamps for shafts, bars and guides.

How do I choose a Pullfix clamp?

What matters is the size and material of the workpiece, the diameter of the clamping hole, the number of points and whether the workpiece deforms after heat treatment, in which case the compensation mode is used. We need the workpiece drawing and the machine it is mounted on.

Do you supply IMAO products in Romania, and how fast?

Yes. Items can ship in 24–72 h when the item is in stock, locally or at the supplier; supplied to order, usually in 1–4 weeks. For complete sets or special configurations the lead time may be longer and is confirmed in the quotation.

Can I adapt a Finger Changer to my gripper?

Any gripper that accepts the clamping pin can be used, with an adapted mounting plate. We need the drawing or model of the gripper, the shape of the fingers and the maximum load to check whether the adaptation is possible.

What do I need to send for a quotation on One Touch elements?

Send the code or series, the thickness of the plates to be fastened, the desired clamping force, the environment (dust, humidity, cleaning) and the quantity. For shaft clamps, add the shaft diameter or the bar section.

How do I request a IMAO quotation?

Send the IMAO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: IMAO Corporation (manufacturer documentation)