IMP Pumps supplier in Romania
For IMP Pumps we quote the NMT PLUS and NMT SMART II circulation pumps, the CL and ECL in-line pumps, the BL and BWJ multistage pumps and the FMT MICRO pumps; we need the type from the nameplate or the flow and head.
Founded in 1947 · Headquarters: Komenda, Slovenia
Who is IMP Pumps and what does it make?
IMP Pumps is a Slovenian manufacturer of pumps and pumping systems, headquartered in Komenda, which designs, develops, produces and services pumps. The company was founded in 1947, has its own research and development department for circulation pumps and a quality system certified to ISO 9001:2015. The core programme is circulation pumps for heating, ventilation and air-conditioning installations, with threaded or flanged connection, single or double, with a hydraulic casing in bronze or cast iron; the cast iron parts are protected by cataphoresis. IMP pumps are found in boiler rooms, in air-conditioning installations, in domestic hot water loops and in pressure-boosting stations in buildings.
The range is grouped into five families: NMT, GHN, MULTISTAGE, INLINE and SAN. NMT are high-efficiency electronic pumps for heating, air-conditioning, cooling and domestic water: they continuously measure pressure and flow and adapt their speed to the chosen operating mode, and their motor is synchronous, with permanent magnets. The family includes NMT MINI, NMT PLUS, with analogue 0–10 V input (ER) or PWM signal, and NMT SMART II, with S, U or C communication modules, in threaded or flanged (F) design and in the NMTD double version. GHN are three-speed pumps, for markets outside the EU.
The INLINE family includes single-impeller close-coupled centrifugal pumps, with suction and discharge on the same axis and of the same diameter, with a 2-pole or 4-pole motor and the option of an integrated Danfoss or separate Hitachi frequency converter: CL, CLD, ECL, ECLD, CV and PV. Among the multistage pumps, the BL is the vertical pump and the BWJ the horizontal one, both in stainless steel. For domestic hot water there are the FMT MICRO for recirculation loops, the NMT SAN, SAN and SANbasic II, and for water supply to homes and buildings, the HOME PRESSURE BOOSTER pressure-boosting unit. For a quotation, send us the complete type from the pump nameplate, with the connection and the installation length.
What do we supply from the IMP Pumps range?
| Product | Description |
|---|---|
| NMT MINI and NMT PLUS Circulation Pumps | High-efficiency electronic pumps for heating, air-conditioning and domestic water: NMT MINI in the PLUS, PRO, ER and PWM versions, with numeric display, automatic mode and night mode on the PRO, and NMT PLUS with analogue 0–10 V input (ER) or PWM signal with solar or heating profile; NMTD PLUS is the double version. |
| NMT SMART II and NMTD SMART II | Threaded or flanged (F) circulation pumps, single or double (NMTD), with S, U or C communication modules for integration into building automation. They measure pressure and flow and control the speed according to the set operating mode, for heating, air-conditioning and cooling. |
| CL, ECL, CV and PV In-Line Pumps | Single-impeller close-coupled centrifugal pumps, with suction and discharge on the same axis, with a standard motor or with an extended shaft, 2-pole or 4-pole: CL and CLD, ECL and ECLD, CV for lower flows and PV for domestic hot water, with the option of an integrated Danfoss or separate Hitachi converter. |
| BL and BWJ Multistage Pumps | Stainless steel multistage centrifugal pumps: BL in vertical design and BWJ in horizontal design, for water supply and pressure boosting, including in domestic water installations. They stand out for high efficiency, low noise and stable operation. |
Why IMP Pumps?
- NMT pumps with permanent-magnet motor — high efficiency in heating and air-conditioning circulation
- Automatic control by pressure and flow — the pump adapts its speed to the chosen operating mode
- S, U and C communication modules on the NMT SMART II — link to building automation
- In-line pumps with integrated Danfoss or separate Hitachi converter — speed control at high flows
- Hydraulic casings in bronze or cataphoresis-protected cast iron — design chosen to suit the installation
Which IMP Pumps codes and series are requested most often?
| Code | Description |
|---|---|
| NMT MINI PRO | Circulation pump with display, automatic mode and night mode |
| NMT PLUS ER | Circulation pump with analogue 0–10 V input |
| NMT PLUS PWM S | Circulation pump with digital input and solar profile |
| NMTD PLUS | Double circulation pump |
| NMT SMART II C F | Flanged circulation pump with C communication module |
| NMTD SMART II | Threaded double circulation pump |
| NMT SAN PLUS | Circulation pump for domestic hot water |
| GHN | Threaded circulation pump with three speed steps |
| GHNbasic II | Flanged circulation pump, three speed steps |
| GHN SOL | Two-speed pump for solar installations |
| CL 4 POLES | In-line pump with 4-pole motor |
| ECLD 2 POLES | Double in-line pump with 2-pole motor |
| CV 2 POLES | In-line pump for lower flows |
| BL | Vertical multistage centrifugal pump |
| BWJ | Horizontal multistage centrifugal pump |
| FMT MICRO | Recirculation pump for domestic hot water |
Where is IMP Pumps equipment used?
- Residential and commercial buildings — circulation of the heating medium with NMT pumps
- Ventilation and air-conditioning — CL and ECL in-line pumps in large building installations
- Domestic hot water — recirculation with FMT MICRO and NMT SAN
- Water supply — pressure boosting with BL and BWJ multistage pumps
- Solar thermal installations — NMT PLUS PWM pumps with solar profile and GHN SOL
How do we supply IMP Pumps in Romania?
We can quote IMP Pumps NMT, NMT SMART II and GHN circulation pumps, CL and ECL in-line pumps, BL and BWJ multistage pumps and FMT MICRO recirculation pumps. For a correct quotation, send us the complete type from the nameplate, with the connection (threaded or flanged) and the installation length, or the installation data: the fluid pumped, the flow, the head and the voltage. We bring the items in made to order, through EU channels, usually in 1–4 weeks, and in 24–72 h when the item is available locally or at the supplier; for large in-line pumps, depending on the brand and the specifications, the lead time can be longer.
We select the pump from the installation data you send, and setting the control mode at commissioning remains with the team that installs the pump.
Frequently asked questions about IMP Pumps
What does IMP Pumps make?
IMP Pumps makes pumps and pumping systems in Komenda, Slovenia: mainly circulation pumps for heating, ventilation and air-conditioning from the NMT and GHN families, CL, ECL and CV in-line pumps, BL and BWJ stainless steel multistage pumps and domestic hot water pumps such as the FMT MICRO and SANbasic II.
How do I choose between the NMT PLUS and NMT SMART II?
The main difference is communication. The NMT PLUS has versions with 0–10 V or PWM input, suited when the pump receives its command from a controller. The NMT SMART II is supplied threaded or flanged, single or double, with S, U or C modules for the link to building automation. Send us the flow, the head and the available control signal.
Do you deliver IMP Pumps in Romania, and how long does it take?
Yes. We bring in IMP Pumps made to order, through EU supply channels, in a usual time of 1–4 weeks. Delivery is 24–72 h when the item is available locally or at the supplier. In-line pumps with a converter or larger orders may have, depending on the brand and the specifications, a longer lead time.
Can I replace an old GHN pump with an NMT pump?
It is possible, if the mounting dimensions match. GHN are three-speed pumps, intended for markets outside the EU, while NMT are electronic variable-speed pumps. For a replacement we need the installation length, the connection, the nominal diameter and the operating point of the old pump, so we can choose the corresponding NMT model.
What do I send for a quotation on an IMP Pumps pump?
For a replacement, the complete type from the nameplate is enough. For a new pump, send us the application (heating, cooling, domestic water or pressure boosting), the flow, the head, the medium temperature, the voltage and whether the pump must communicate with building automation through the S, U or C module.
How do I request a IMP Pumps quotation?
Send the IMP Pumps code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 19 November 2026 · Sources: IMP Pumps (manufacturer documentation)

