Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Innomotics supplier in Romania

For Innomotics we quote high-voltage motors from the HV M, HV HS and HV HP families and medium-voltage drives from the GH150, GM150, SM150 and SL150 series; for a quotation we need the motor nameplate or the process data.

Request a quote

Who is Innomotics and what does it make?

Innomotics makes high-voltage electric motors and high-power drive systems. The range is divided in two: induction and synchronous motors for installations with power in the megawatt range, and medium-voltage drives for controlling the speed of these motors. Typical applications are compressors, pumps, fans, generators and liquefied gas plants.

HV M motors operate between 3 and 13.8 kV, up to 29 MW, with 2 to 12 poles, shaft heights of 450–560 mm with the cast iron frame and 630–900 mm with the welded steel one, and degrees of protection from IP23 to IP56. The HV HS series is synchronous, with a solid cylindrical rotor, for high speeds and power from 15 MW at 6700 rev/min up to 105 MW at 3000 rev/min. The HV HP platform covers induction motors of 1.8–38 MW and synchronous motors of 8–70 MW, with speeds between 130 and 3600 rev/min for the induction ones.

For drives, the portfolio runs from 100 kW to 100 MW. The general-purpose series are Perfect Harmony GH150 and GH180, GM150 and GL150. For special requirements there are Perfect Harmony SH150, SM150 with IGBT or IGCT technology and SL150 based on thyristors. For a quotation, what matters is the voltage, the power, the speed, the cooling type (IC code) and the explosion hazard zone, if applicable.

What do we supply from the Innomotics range?

ProductDescription
HV M motorsHigh-voltage motors with a modular cooling concept, between 3 and 13.8 kV and up to 29 MW. The frame is cast iron at shaft heights of 450–560 mm and welded steel at 630–900 mm. Explosion-protected versions are available for zone 1 and zone 2.
HV HS motorsSynchronous motor with a solid cylindrical rotor, for operation at high speeds: from 15 MW at 6700 rev/min up to 105 MW at 3000 rev/min. The voltage is 3.3–13.8 kV with variable-speed drive. Applications: compressors, gas storage, liquefied natural gas (LNG) plants and generators.
HV HP motorsFlexible platform for high power: induction motors of 1.8–38 MW and synchronous motors of 8–70 MW, with voltages of 3–13.8 kV. Cooling can be IC 81 W, IC 86 W, IC 616, IC 666, IC 01 or IC 31, and the stated efficiency reaches 98.8 % for the synchronous version.
Medium-voltage drivesThe Perfect Harmony series GH150 and GH180, GM150 and GL150 are general-purpose, while SH150, SM150 and SL150 are for special applications. The portfolio covers 100 kW–100 MW and applications from pumps and fans to test drives and data centres.

Why Innomotics?

  • Induction and synchronous high-voltage motors in the same family — the type is chosen by the starting torque and the available network
  • Cast iron or welded steel frames on HV M — the choice depends on the shaft height and the mounting environment
  • Explosion-protected versions for zone 1 and zone 2 — they suit compressor stations and gas installations
  • Medium-voltage drives from 100 kW to 100 MW — a single family for pumps, fans and compressors
  • Varied cooling systems (IC 01, IC 81 W, IC 616 and others) — the installation can use air or water

Which Innomotics codes and series are requested most often?

CodeDescription
HV MHigh-voltage motor, 3–13.8 kV, up to 29 MW
HV HSSynchronous motor with a solid cylindrical rotor, 15–105 MW
HV HPPlatform of high-power induction and synchronous motors
GH150Perfect Harmony medium-voltage drive, general purpose
GH180Perfect Harmony medium-voltage drive, general purpose
GM150Medium-voltage drive, general purpose, compact size
GL150Medium-voltage drive for high power
SH150Perfect Harmony drive for special and grid applications
SM150High-dynamics drive, IGBT or IGCT technology
SL150Thyristor-based medium-voltage drive

Where is Innomotics equipment used?

  • Oil and gas — driving compressors and transfer pumps
  • Liquefied gas — compressors with high-speed synchronous motors
  • Water and wastewater — large pumps with medium-voltage motors
  • Energy — fans and feed pumps of power plants
  • Cement and mining — high-power drives with medium-voltage drives

How do we supply Innomotics in Romania?

We can quote Innomotics high-voltage motors and medium-voltage drives, including replacing an existing motor with the same mounting. For an accurate quotation, send the data from the nameplate of the motor or drive: voltage, power, speed, number of poles, shaft height, cooling type and explosion protection. We supply to order; for equipment of this type the lead time depends on the configuration, and the exact date appears in the quotation.

For large motors we check the construction data of the series in the quotation, because voltage, cooling and protection are set case by case.

Frequently asked questions about Innomotics

What are the HV M, HV HS and HV HP families and the GH150, GM150 and SL150 series at Innomotics?

Innomotics makes high-voltage electric motors, from the HV M, HV HS and HV HP families, and medium-voltage drives from the GH150, GH180, GM150, GL150, SH150, SM150 and SL150 series. Power reaches up to 105 MW for motors and up to 100 MW for drives, for compressors, pumps and fans.

How do I choose between HV M, HV HS and HV HP?

HV M covers up to 29 MW, at 3–13.8 kV, with 2–12 poles. HV HS is synchronous, with a cylindrical rotor, for high speeds and power from 15 MW. HV HP includes high-power induction and synchronous versions. Send the power, the voltage and the speed, and we check the suitable series.

What data do you need for a medium-voltage drive?

Send the mains voltage, the power and voltage of the motor, the type of load (pump, fan, compressor), the speed and, if there is one, the nameplate of the current drive. With these data we check whether a GH150, a GM150 or a special series such as SM150 fits.

Can I replace a high-voltage motor with a new one?

Yes, if the shaft height, the speed, the voltage, the cooling type and the degree of protection are compatible. Send photos and the nameplate data; we check the series and the mounting versions that fit your installation.

Do you supply Innomotics in Romania, and how fast?

Yes, we supply Innomotics equipment to order. For high- and medium-voltage motors and drives, the lead time depends on the configuration; the exact date appears in the quotation, after we receive the technical data.

How do I request a Innomotics quotation?

Send the Innomotics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Innomotics GmbH (manufacturer documentation)