Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

IRC S.p.A. supplier in Romania

For IRC we quote ASME and EN elbows, equal and reducing tees, concentric and eccentric reducers, caps and crosses in grades A234 WPB, WP11, WP22, A860 WPHY and 304 and 316 stainless steel, based on the project material list.

Founded in 1971 · Headquarters: Cremona, Italy

Request a quote

Who is IRC S.p.A. and what does it make?

IRC S.p.A. is an Italian manufacturer of butt-welding fittings, based in Cremona and active since 1971. It makes elbows, tees, reducers, caps and crosses in carbon steel, alloy steel and stainless steel, from 1/2 inch up to 48 inches and larger, in seamless or welded versions, in various wall thicknesses and material grades conforming to ASME and EN standards. The parts are supplied with EN 10204 type inspection documents, and conformity with the pressure equipment directive is specified in the manufacturer's documentation.

The programme is organised by part type. Tees are made equal and reducing, barred and lateral; reducers are concentric and eccentric, from 3/4 x 1/2 inch up to 48 x 30 inches; caps are ASME, and crosses are made seamless between 1 and 16 inches and welded between 18 and 48 inches. ASME elbows cover 1–48 inches at 45°, 90° and 180° according to ASME B16.9, while EN/DIN/ISO elbows range from 21.3 to 609.6 mm. Materials include ASTM A234 WPB, WP11, WP22, WP9, WP91, WP5 and WP12, ASTM A860 WPHY42–WPHY70, MSS SP-75, ASTM A403 for 304/304L and 316/316L stainless steel, as well as EN 10253-2 and EN 10253-4 grades.

Butt-welding fittings are installed on pipelines in refineries, petrochemical and chemical plants, power installations, shipyards and industrial networks. The choice depends on the standard (ASME or EN), diameter, wall thickness, steel grade and certification requirements, which is why the quotation starts from the project material list or from the part code in the original order.

What do we supply from the IRC S.p.A. range?

ProductDescription
Equal, reducing, barred and lateral teesButt-welding tees in grades A234 WPB, WP11, WP22, WP9, WP91, WP5, WP12, A860 WPHY and MSS SP-75, plus A403 304 and 316 stainless steel. The barred and lateral versions are for special branches on large pipelines.
Concentric and eccentric reducersReducers from 3/4 x 1/2 inch up to 48 x 30 inches and, on request, other sizes, for changing the diameter between two pipe sections, in the same steel grades as the tees.
ASME caps and crossesASME caps close the end of a pipe according to ASME B16.9 and B16.25, in sizes from 1/2 inch up to 48 inches. Crosses are made seamless between 1 and 16 inches and welded between 18 and 48 inches.
ASME elbows and EN/DIN/ISO elbowsASME elbows of 1–48 inches at 45°, 90° and 180° follow ASME B16.9, while EN/DIN/ISO elbows, from 21.3 to 609.6 mm, are made in grades P235GH, P265GH, P355NH, 16Mo3, 10CrMo9-10 and stainless steel according to EN 10253.

Why IRC S.p.A.?

  • Specialisation in welded fittings — elbows, tees, reducers, caps and crosses in a single programme, for process piping
  • Seamless and welded versions — for example, crosses are seamless between 1 and 16 inches and welded between 18 and 48 inches
  • ASME and EN standards in the same programme — ASME B16.9 and B16.25 for American-standard parts, EN 10253-2 and EN 10253-4 for European-standard parts
  • Grades for different temperatures and pressures — carbon steel WPB, alloy WP11, WP22, WP91, high-strength WPHY grades and 304, 316 and 321 stainless steel
  • Certifications according to the manufacturer's documentation — the parts come with material documents and documents of conformity with the applicable pressure equipment directives

Which IRC S.p.A. codes and series are requested most often?

CodeDescription
Equal and reducing teesEqual and reducing tees, butt-welding
Barred teesBarred tees for branches on large pipelines
Lateral teesLateral tees
Concentric reducersConcentric reducers, 3/4 x 1/2 – 48 x 30 inches
Eccentric reducersEccentric reducers, 3/4 x 1/2 – 48 x 30 inches
ASME capsASME B16.9 and B16.25 caps, 1/2 – 48 inches
CrossesCrosses, seamless 1–16 inches and welded 18–48 inches
ASME bendsASME B16.9 elbows, 1–48 inches, 45°, 90° and 180°
EN/DIN/ISO bendsElbows 21.3–609.6 mm, 45°, 90° and 180°
A234 WPBCarbon steel fittings, ASME/ASTM SA/A 234
A234 WP11 / WP22 / WP91Alloy steel fittings for high temperatures
A860 WPHYHigh-strength fittings, WPHY42 – WPHY70
A403 WP304 / WP316Stainless steel fittings
EN 10253-2Fittings in non-alloy and alloy steels for pressure piping

Where is IRC S.p.A. equipment used?

  • Oil and gas — crude oil and gas pipelines with ASME fittings and WPHY grades
  • Petrochemicals and chemicals — process lines in alloy steel and stainless steel
  • Energy — fittings in WP11, WP22 and WP91 alloy steels
  • Shipbuilding — installations with butt-welding fittings

How do we supply IRC S.p.A. in Romania?

We can quote IRC butt-welding fittings: elbows, tees, reducers, caps and crosses, in ASME and EN grades, supplied to order. Parts usually arrive in 1–4 weeks from order, and large diameters, special thicknesses and additional certifications may extend the lead time. For a correct quotation, send us the material list or the part code, the standard (ASME B16.9, EN 10253), the diameter and wall thickness (schedule or mm), the steel grade, the part type (elbow, tee, reducer) and the required certificate, for example EN 10204 3.1.

The wall thickness and steel grade of a part remain to be set on the basis of the standard, the diameter and the pressure and temperature data from the project.

Frequently asked questions about IRC S.p.A.

What does IRC S.p.A. make?

IRC, with its registered office in Cremona and its plant in Cortemaggiore, makes butt-welding fittings in carbon, alloy and stainless steel: elbows, tees, reducers, caps and crosses. The company has operated since 1971, and the parts, from 1/2 inch up to 48 inches, are made seamless or welded and carry certifications stated in the manufacturer's technical documentation.

How do I choose between an ASME elbow and an EN/DIN/ISO one?

ASME elbows follow ASME B16.9 and are expressed in inches; EN/DIN/ISO ones are expressed in millimetres, from 21.3 to 609.6, and follow EN 10253. The choice depends on the standard of the existing pipeline. Send us the outside diameter, the thickness and the steel grade.

Can you supply IRC fittings in Romania and how fast?

IRC fittings are supplied to order, usually in 1–4 weeks. For large diameters, special thicknesses or additional certificates, depending on the specification, the lead time may be longer. Parts can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the lead time in the quotation.

What do grades WP11, WP22 and WP91 mean for a fitting?

Grades WP11, WP22 and WP91 are alloy steels intended for high operating temperatures. For a quotation we need the standard (A234), the part type, the diameter, the wall thickness and the required material certificate. Equivalences between grades are confirmed on the basis of these data.

What data should I send for a quotation on butt-welding fittings?

Send the material list, with the part type, the standard (ASME B16.9 or EN 10253), the diameter, the wall thickness, the steel grade, the quantity and the required certificate. For replacement parts, add the marking on the existing part and the operating pressure and temperature.

How do I request a IRC S.p.A. quotation?

Send the IRC S.p.A. code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: IRC S.p.A. (manufacturer documentation)