ITW Performance Polymers supplier in Romania
For ITW Performance Polymers we quote Plexus MA structural adhesives, Chockfast Red Versaflow chocking compounds and Devcon Wear Guard 300RTC, EZ-Spray Ceramic and DFense Blok coatings; for a quotation we need the materials, the working temperature and the volume to be cast or coated.
Who is ITW Performance Polymers and what does it make?
ITW Performance Polymers makes structural adhesives, epoxy compounds for chocking and casting machinery, and wear-resistant coatings, for industrial maintenance and assembly. The range is split into brands with a clear role: Plexus for methacrylate structural adhesives, Devcon for repairs with epoxies and urethanes, Chockfast for chocking machines on foundations, and the range also includes the Korrobond, Marine Tex, Spraycore, Epocast and Insulcast brands. The company works from Danvers and Montgomeryville (USA), and for Europe from Shannon, Ireland.
Plexus is used for bonding composites, thermoplastics and metals, including dissimilar materials, with minimal surface preparation or none, at room temperature and without a primer. It is packed in 50, 400 and 490 ml cartridges for dispensing guns. The series has versions for different applications: MA420W, MA7020 (non-flammable), MA8000 GB, MA8105 GB (steel doors), MA8110 and H4110, and a thermomechanical polyurethane adhesive completes the range. An adhesive of this kind can replace welding or riveting, which helps when the part cannot take heat or holes.
Chockfast is the chocking line for heavy machinery: two-component epoxy compounds for chocking with cast chocks and three-component systems for casting foundations. The aim is precise and permanent alignment of the machine, resistance to expansion under machinery that runs hot, and fast curing with negligible shrinkage. Chockfast Red Versaflow also comes as a single-bag kit. Devcon completes the range with Wear Guard 300RTC, an anti-abrasion coating for high temperatures, EZ-Spray Ceramic for rotors, DFense Blok against abrasion, R-Flex for repairing conveyor belts and Korrobond 65 Ultra, a backfill compound behind crusher liners. Typical applications: compressors and pumps on cast foundations, crushers, conveyor belts, treatment plants.
What do we supply from the ITW Performance Polymers range?
| Product | Description |
|---|---|
| Plexus MA420W, MA7020, MA8110 | Methacrylate structural adhesives for bonding metals, composites and thermoplastics, at room temperature and without a primer. MA7020 is the non-flammable version, MA8105 GB has a datasheet dedicated to steel doors; the choice of series depends on the materials, the joint gap and the working time. |
| Plexus H4110 and the thermomechanical polyurethane | Plexus versions outside the MA series, each with a separate application datasheet: H4110 and the thermomechanical polyurethane adhesive. They come into consideration when a methacrylate adhesive is not suitable, and the choice is made from the materials, the load and the working conditions of the part. |
| Chockfast Red Versaflow | Epoxy casting compound for chocking machinery on foundations, with precise and permanent alignment, resistance to expansion under hot machinery and fast curing with negligible shrinkage. There is also a single-bag kit, for castings where mixing by components would slow the work. |
| Devcon Wear Guard 300RTC, EZ-Spray Ceramic, DFense Blok | Protective coatings against abrasion and impact, for pump rotors, chutes, hoppers and wear chambers. Wear Guard 300RTC withstands higher temperatures, EZ-Spray Ceramic is applied by spraying, and DFense Blok is used where impacts are frequent. |
Why ITW Performance Polymers?
- Plexus without a primer and at room temperature — bonding metal to metal, composites or thermoplastics is done without complicated preparation, so without a long line stoppage
- Chockfast epoxy chocking with negligible shrinkage — the position of the machine stays aligned after curing, useful on compressors and process pumps
- Single-bag version, Chockfast Red Versaflow 1-Bag — simpler casting on site, without mixing several components
- Devcon anti-abrasion coatings for rotors, hoppers and belts — Wear Guard 300RTC, EZ-Spray Ceramic, DFense Blok and R-Flex cover different types of wear
- Plexus cartridges of 50, 400 and 490 ml — dispensing with a standard gun, suited either to workshop repair or to the assembly line
Which ITW Performance Polymers codes and series are requested most often?
| Code | Description |
|---|---|
| Plexus MA420W | Plexus structural adhesive, dedicated datasheet |
| Plexus MA7020 | Plexus structural adhesive, non-flammable version |
| Plexus MA8000 GB | Plexus series with a dedicated datasheet |
| Plexus MA8105 GB | Plexus adhesive for steel doors |
| Plexus MA8110 | Plexus structural adhesive |
| Plexus H4110 | Plexus adhesive with a dedicated datasheet |
| Plexus PU Thermomechanical | Plexus thermomechanical polyurethane adhesive |
| Chockfast Red Versaflow | Epoxy casting compound for chocking machinery |
| Chockfast Red Versaflow 1-Bag Kit | Single-bag Versaflow version, for casting |
| Devcon Wear Guard 300RTC | Anti-abrasion coating for high temperatures |
| Devcon EZ-Spray Ceramic | Ceramic coating applied by spraying, for rotors |
| Devcon DFense Blok | Protection against abrasion and impact |
| Devcon R-Flex | Repair system for conveyor belts |
| Devcon Korrobond 65 Ultra | Backfill compound behind crusher liners |
| Devcon Zip Patch | Devcon repair product with a dedicated datasheet |
Where is ITW Performance Polymers equipment used?
- Gas and petrochemicals — chocking compressors and process pumps on cast foundations
- Mines and gravel pits — crusher liners, chutes, conveyor belts, pump rotors
- Power plants and energy — foundation repairs, protection of rotors and pipes
- Transport and vehicles — bonding panels, bodies, trailers and wagons
- Manufacturing — assembly of metal to metal, glass or plastic, without welds or rivets
How do we supply ITW Performance Polymers in Romania?
From the ITW Performance Polymers range we can quote Plexus, Devcon and Chockfast, depending on the application: structural bonding, machinery chocking or wear protection. The products are supplied to order, usually in 1–4 weeks; large quantities of Chockfast and special configurations may take longer, and the lead time is confirmed in the quotation. Send us the materials to be joined or the machine to be chocked, the working temperature, the size of the gap to be cast and, if you are replacing an existing product, the name on the pail or cartridge.
The choice between two Plexus or Devcon series is made once we have the materials to be bonded, the working temperature and the curing time allowed.
Frequently asked questions about ITW Performance Polymers
What does ITW Performance Polymers make?
The company makes structural adhesives, epoxy chocking and casting compounds and wear coatings, grouped by brand: Plexus for structural bonding, Devcon for repair and protection, Chockfast for mounting machinery on foundations, plus Korrobond, Marine Tex and Spraycore. They are maintenance and industrial assembly products.
How do I choose between a Plexus adhesive and a weld or a rivet?
Plexus is chosen when the parts are of different materials, when the heat of welding would deform the sheet or when drilling weakens the part. Send us the materials, the thickness of the joint and the load (tension, shear, vibration) so that we can check which MA or PU series suits.
How soon can you supply ITW Performance Polymers products in Romania?
Adhesives, chocking compounds and coatings are supplied to order, usually in 1–4 weeks. For Chockfast in large quantities or for a particular casting system the lead time can be longer; we confirm the exact date in the quotation, after identifying the item.
I have a chocking compound on an existing foundation; can it be replaced with Chockfast?
A replacement is confirmed after checking the data. For a check we need the name of the old compound, the type of machine, the working temperature, the thickness of the cast layer and whether the work is two-component or three-component. With these we establish whether Chockfast Red Versaflow or another version is suitable.
What data do I send for a quotation on Devcon coatings?
Send the part to be protected (rotor, chute, hopper, belt), the type of wear (abrasion, impact, corrosion), the working temperature and environment, the approximate surface and whether application is by brush or by spraying. In this way we direct the quotation towards Wear Guard, EZ-Spray Ceramic or DFense Blok.
How do I request a ITW Performance Polymers quotation?
Send the ITW Performance Polymers code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ITW Performance Polymers (manufacturer documentation)

