Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Jaure supplier in Romania

Gear couplings, LAMIDISC and BARFLEX

Founded in 1958 · Headquarters: Zizurkil, Spain

Request a quote

Who is Jaure and what does it make?

Jaure is a maker of flexible couplings and transmission elements, established in 1958 in Zizurkil, in the Basque Country. Jaure has customers in the steel industry, shipbuilding, wind energy, lifts, railways, paper mills and petrochemicals. The MS series, from 1970, opened the Jaure range of flexible couplings; MN, HA and, more recently, MT were added later.

For a maintenance engineer, the core of the range is the gear coupling. The MTGR model is offered in 16 sizes, with a bore between 150 and 1200 mm and a nominal torque in the range 265–18,500 kNm, in alloy or carbon steel; the design aims at lower mass and faster installation, reducing the time spent heating the parts by 3–6 hours. Alongside it, LAMIDISC is a maintenance-free disc coupling, without lubrication, with versions with 6, 8 or 10 bolts and ATEX versions according to the manufacturer's documentation, and BARFLEX TCBR is a barrel coupling, designed for the link between the cable drum and the gearbox on cranes.

Quality system certifications and type approvals from marine classification societies are given in the manufacturer's documentation. Besides couplings, there are components and accessories: hubs, sleeves, fastener sets, disc packs, gaskets and spacer pieces.

What do we supply from the Jaure range?

ProductDescription
MTGR – gear couplingsGear coupling for the cement industry, metallurgy, dredging, cranes and mining, in 16 sizes with bore 150–1200 mm. The design increases bore and torque capacity and reduces part mass.
LAMIDISCDisc pack coupling, torsionally rigid and backlash-free, with versions with 6, 8 or 10 bolts and the DOM range for quick installation. It can be supplied with steel or composite drive shafts.
BARFLEX TCBRBarrel coupling for cranes, steelworks, winches and conveyor belts. It has a torque capacity about 10% higher than TCB-HD and a mechanical wear indicator.
COMPOLINKHybrid coupling in the Jaure range, between steel disc couplings and elastomeric ones.

Why Jaure?

  • MTGR gear couplings — 16 sizes, bore 150–1200 mm, alloy or carbon steel, for high-power transmissions
  • Maintenance-free LAMIDISC — disc coupling, without lubrication, with discs that can be checked in operation with a stroboscopic lamp and declared 2G/2D versions for explosion-hazard zones
  • BARFLEX TCBR for cranes — barrel coupling with mechanical wear indicator, declared interchangeable with the TCB and TCB-HD lines
  • Marine certificates on request — LAMIDISC can be supplied with a 3.2 certificate from marine classification societies
  • Custom solutions — special seals, alloy steels and treatments (nitriding, carburising, induction hardening) for demanding applications

Which Jaure codes and series are requested most often?

CodeDescription
MTGRGear coupling, 16 sizes, bore 150–1200 mm
MSFlexible coupling series, in the range since 1970
MNGear coupling series
HAGear coupling series
MTRecently designed gear coupling
LAMIDISCDisc coupling, 6/8/10 bolts, versions for explosion-hazard zones
LAMIDISC DOMVersion for quick installation
BARFLEX TCBRBarrel coupling for cranes
TCB / TCB-HDBarrel coupling series interchangeable with TCBR
COMPOLINKDisc-elastomer coupling

Where is Jaure equipment used?

  • Steel industry — rolling lines, cranes and winches
  • Wind energy — transmissions with flexible couplings
  • Shipbuilding — couplings with certificates from classification societies
  • Paper industry — high-power transmissions with gear couplings
  • Mining and cement — mills and conveyor belts

How do we supply Jaure in Romania?

We can quote Jaure couplings (gear, LAMIDISC, BARFLEX) and spare components, for example hubs, sleeves, bolt sets or disc packs. For usual items the lead time is typically 1–4 weeks, and large sizes and special versions may take longer. The request should include the series and size marked on the coupling, the bore diameters and keyways, the torque or power and the speed, the type of machine and, where applicable, the requirement for a marine certificate or an ATEX zone.

The dimensions of an older Jaure coupling relative to the current series are established from the marking on the hub and the bore data, not from a photo.

Frequently asked questions about Jaure

What product range does Jaure have?

Jaure makes flexible couplings and transmission elements: gear couplings (MS, MN, HA, MT/MTGR), LAMIDISC disc couplings, BARFLEX barrel couplings and COMPOLINK. The brand was created in 1958 in Spain.

How do I choose an MTGR gear coupling?

Start from the nominal torque, the shaft diameter and the speed. MTGR offers 16 sizes, with a bore between 150 and 1200 mm and a nominal torque from 265 kNm upward. Send the transmission data, and we check the suitable size.

Do you supply Jaure couplings in Romania, and how fast?

Yes, Jaure couplings are supplied to order. Supplied to order, it usually takes 1–4 weeks; large sizes or special versions may need longer. The exact lead time is given in the quotation.

Can I replace an old coupling with one from the current series?

If the marking and dimensions are found in the current series, yes; otherwise the bore, the length and the interface with the shafts must be checked. Equivalences are assessed from confirmed data: send us the marking on the hub and a dimensioned sketch.

What do I need to send for a LAMIDISC quotation?

Specify the torque and speed, the bores, the distance between shaft ends, the number of bolts wanted (6, 8 or 10), the ATEX zone if any and any requirement for a 3.2 certificate for marine use. With these data we prepare the request.

How do I request a Jaure quotation?

Send the Jaure code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Regal Rexnord (manufacturer documentation)