Kadant Johnson supplier in Romania
For Kadant Johnson we quote SX, ELS, PT2X, LJX and CorrPro rotary joints, Cantilever, ISSS and HDRS siphons, thermocompressors and Float Level Control condensate pumps, based on the fluid, pressure, speed and cylinder type.
Who is Kadant Johnson and what does it make?
Kadant Johnson makes rotary joints for steam, water and thermal oil, siphons for removing condensate from steam-heated cylinders, thermocompressors, pressure-powered condensate pumps, expansion joints and accessories for steam circuits. The rotary joint is the part that passes fluid between a fixed pipe and a rotating cylinder or roll, and the siphon removes condensate from inside that cylinder. They are used on paper machines, corrugators and other machines with heated rolls.
The standard rotary joint family includes SX, ELS, ELSX, RX, G, PT2X, CorrPro, LJX, LJX-PT, LJ-PT, BCI/BCIM, C-Cast and over-the-shaft joints. The SX joint is self-supporting, from 3/4 to 3 inches, for 300 psig (20 bar, gauge pressure), up to 650 °F (343 °C) and 550 rpm, with two internal carbon-graphite bearings. LJX and LJX-PT are intended for corrugators, with a siphon locking plate and a seal wear indicator. The stationary siphons are Cantilever and ISSS, the rotating ones are HDRS and Rotary Scoop, and for corrugated board there are Slimline, 90° Locking Elbow and Supercurve.
Thermocompressors raise the pressure of low-pressure steam by mixing it with high-pressure steam, using a nozzle, a mixing section and a diffuser. Pressure-powered pumps of the Float Level Control, Float Free and LMX Smart Pump types move condensate using steam or air pressure; only the float version works without electrical power. For a quotation, the joint model, the connection thread, the siphon type, the machine speed, the pressure and the temperature matter.
What do we supply from the Kadant Johnson range?
| Product | Description |
|---|---|
| SX, ELS, ELSX, PT2X and CorrPro rotary joints | Joints for connecting heated cylinders to the steam network. SX is self-supporting, 3/4–3 inches, 300 psig (20 bar), 343 °C, 550 rpm, in single or double flow design. ELS, ELSX and PT2X are paired with stationary siphons, and CorrPro is for corrugators. |
| LJX, LJX-PT, RX, G, BCI and C-Cast joints | LJX is a rigid-siphon joint for upgrading corrugator rolls, with SecureLock plate, self-locking elbow and reinforced mounting rods. RX, G, BCI/BCIM, C-Cast and the over-the-shaft versions cover cylinders and shafts of different sizes. |
| Cantilever, ISSS, HDRS and Rotary Scoop siphons | Stationary Cantilever siphons (dryers up to 6000 fpm) and ISSS (up to 4000 fpm), rotating HDRS siphons (below 3300 fpm, forming a condensate ring) and Rotary Scoop (below 650 fpm). For corrugators there are Slimline, 90° Locking Elbow and Supercurve. |
| Thermocompressors and pressure-powered pumps | Thermocompressors raise the pressure of low-pressure steam by mixing it with high-pressure steam, in recirculation or pressure-boosting versions. Float Level Control, Float Free and LMX Smart Pump pumps remove condensate using steam or air pressure; Float Level Control uses no electrical power, while Float Free and LMX need an electrical supply for the control part. |
Why Kadant Johnson?
- SX rotary joint — 3/4–3 inches, 300 psig, up to 343 °C and 550 rpm, with two internal carbon-graphite bearings for cylinders that are not perfectly concentric
- Wide joint family — SX, ELS, ELSX, RX, G, PT2X, CorrPro, LJX, BCI and C-Cast, for steam, condensate, thermal oil and air
- Siphons by speed range — Cantilever for dryers up to 6000 fpm (feet per minute), ISSS up to 4000 fpm, HDRS below 3300 fpm, Rotary Scoop below 650 fpm
- Products for corrugated board — LJX and LJX-PT with SecureLock siphon locking plate and a wear indicator for the sealing ring
- Pressure-powered condensate pumps — Float Level Control, Float Free and LMX Smart Pump use steam or air pressure, and the float version needs no electrical power
Which Kadant Johnson codes and series are requested most often?
| Code | Description |
|---|---|
| SX | Self-supporting rotary joint, 3/4–3 inches, 300 psig, 343 °C |
| ELS | Rotary joint for steam, with stationary ISSS siphon |
| ELSX | Rotary joint for steam, extended ELS series |
| PT2X | Rotary joint for steam, with Cantilever siphon |
| CorrPro | Rotary joint for corrugators |
| LJX | Rigid joint and siphon for corrugators |
| LJX-PT | Rotary joint for corrugators, PT version |
| RX | Standard rotary joint |
| BCI / BCIM | Rotary joints |
| C-Cast | Cast rotary joint |
| ISSS | Stationary siphon with internal support, up to 4000 fpm |
| HDRS | Heavy-duty rotating siphon, below 3300 fpm |
| Supercurve | One-piece siphon for rolls with vibration |
| Float Level Control | Float condensate pump, no electrical power |
| LMX Smart Pump | Pressure-powered condensate pump |
Where is Kadant Johnson equipment used?
- Paper, board and pulp — dryer cylinders with rotary joints and siphons
- Corrugated board — corrugator rolls with LJX, LJX-PT and CorrPro
- Converting and printing — rolls heated by steam or thermal oil
- Metallurgy and food — rolls and drums heated by steam or thermal oil
- Steam and condensate systems — thermocompressors and pressure-powered condensate pumps
How do we supply Kadant Johnson in Romania?
We can quote Kadant Johnson rotary joints, siphons, thermocompressors and condensate pumps, supplied to order. The lead time is usually 1–4 weeks to order and, depending on the specification, can be longer for special or multi-channel joints. For a correct quotation, send us the model or marking on the joint, the size of the connection thread, the fluid (steam, thermal oil, water), the pressure, the temperature, the rotation speed, the siphon type and the diameter and length of the cylinder or roll.
The joint or siphon is selected on the basis of the fluid, pressure, speed and cylinder type, and multi-channel versions are confirmed on the drawing.
Frequently asked questions about Kadant Johnson
What does Kadant Johnson make?
Kadant Johnson makes rotary joints for steam, water and thermal oil, condensate siphons, thermocompressors, pressure-powered condensate pumps, expansion joints and steam accessories. The products are used on machines with heated cylinders, especially in the paper and corrugated board industry.
How do I choose between a stationary and a rotating siphon?
Rotating siphons, such as HDRS or Rotary Scoop, are used at lower speeds, where the condensate collects in the cylinder. Stationary ones, such as Cantilever or ISSS, are for fast machines, where the condensate forms a ring on the cylinder wall. Send the machine speed and the cylinder diameter, and the suitable type is confirmed in the quotation, based on the manufacturer's documentation.
How long does it take to receive a Kadant Johnson rotary joint in Romania?
Joints are supplied to order; usually 1–4 weeks. Special or multi-channel versions can take longer, depending on the specification. The lead time is confirmed in the quotation, once we receive the marking on the joint.
Can I replace an old joint with an SX?
The connection thread, shaft size, fluid, pressure, temperature, speed and siphon type are checked. A direct replacement is confirmed after comparison; send the marking on the joint, a photo and the process data, and we check whether the current series fits.
What do I send for a quotation on a thermocompressor?
State the pressure of the low-pressure steam and of the high-pressure steam, the required flow, the application type (recirculation or pressure boosting) and the characteristics of the siphons used. For an existing unit, add the series from the nameplate and the diagram of the steam line, so that the fit of the nozzle, mixing section and diffuser with your installation can be checked against the manufacturer's documentation.
How do I request a Kadant Johnson quotation?
Send the Kadant Johnson code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Kadant Johnson (manufacturer documentation)

