The Lee Company supplier in Romania
For Lee we quote Lee Plug, QIP and A.F.O. plugs, poppet and zero-leak check valves, shuttle valves, Visco Jet restrictors and miniature solenoid valves; for a quotation we need the full code, the fluid, the pressure and the flow.
Founded in 1948 · Headquarters: Westbrook, Connecticut, USA
Who is The Lee Company and what does it make?
The Lee Company is an American manufacturer of miniature fluid control components, founded in 1948, based in Westbrook, Connecticut. The programme includes plugs for sealing passages in hydraulic blocks, check valves, relief valves, shuttle valves, flow restrictors, flow metering valves, miniature solenoid valves, nozzles, safety filters and metering pumps. The components are designed to be fitted directly into blocks and housings, where space is small and every element must be reliable.
The Lee Plug, patented in 1958, was the basis of the programme: a pressed-in element that seals passages in manifolds and housings. From it came QIP (for very small sizes), the A.F.O. plugs, which are removable and reusable, and the Cross Port plugs, for intersecting passages. Check valves are made with ball, with side outlet and with high-flow poppet, which gives up to 3.5 times the flow of a ball valve of the same diameter, with the zero-leak version, with elastomer sealing, and the pilot-operated one. The versions for extreme environments withstand working pressures up to 15,000 psi (about 1,030 bar) and temperatures up to 400 °F (about 204 °C).
For flow restriction, Lee uses the Lohm unit (liquid ohm), in which flow resistance is measured like electrical resistance in ohms, and Visco Jet technology reduces sensitivity to viscosity and the risk of cavitation. Solenoid valves are for metering (from nanolitres to millilitres) or isolation, for aggressive fluids. In maintenance, a Lee part is identified exactly by the code on the body: the size, material and opening pressure are part of the code.
What do we supply from the The Lee Company range?
| Product | Description |
|---|---|
| Plugs: Lee Plug, QIP, A.F.O., Cross Port | Pressed-in plugs for sealing holes and passages in hydraulic blocks and housings. QIP simplifies the handling and fitting of very small plugs, A.F.O. is threaded, so removable and reusable, and the Cross Port plug is designed for intersecting passages. |
| Check, shuttle and relief valves | Check valves with ball, with side outlet, with poppet, zero-leak, pilot-operated and for extreme environments. Shuttle valves are spring-loaded, with detent, selective or reverse, and the relief valves are adjustable, thermal or zero-leak. |
| Flow restrictors and flow metering valves | Visco Jet restrictors for high flow restrictions, with reduced sensitivity to viscosity, plus directional controllers, dual controllers and Floserts, which keep a nearly constant flow over a wide range of differential pressures. |
| Miniature solenoid valves, nozzles, filters and pumps | Metering solenoid valves (from nanolitres to millilitres) and isolation valves for aggressive fluids, lubrication, atomising and metering nozzles, stainless steel safety filters and metering pumps with fixed volume (10–175 µL) or variable volume (50–3000 µL). |
Why The Lee Company?
- High-flow poppet check valves — up to 3.5 times the flow of a ball valve of the same diameter, in sizes from 0.125 to 1 inch
- Version for extreme environments — up to 15,000 psi and 400 °F, in corrosion-resistant stainless steel
- Zero-leak check valves — elastomer sealing, with a choice of two elastomers
- Lee, QIP, A.F.O. and Cross Port plugs — for sealing passages in hydraulic blocks, including removable versions
- Visco Jet restrictors — reduced sensitivity to viscosity and reduced risk of cavitation
Which The Lee Company codes and series are requested most often?
| Code | Description |
|---|---|
| Lee Plug | Pressed-in plug for sealing passages in hydraulic blocks |
| Lee QIP | Plug for very small sizes, with simplified fitting |
| A.F.O. Plug | Threaded plug, removable and reusable |
| Cross Port Plug | Plug for intersecting passages |
| Lee Chek | Miniature check valves with ball or poppet |
| High flow check valve | Poppet check valve, 0.125–1 inch |
| Zero Leak check valve | Check valve with elastomer sealing |
| Extreme environment check valve | Check valve up to 15,000 psi and 400 °F |
| Pilot operated check valve | Pilot-operated check valve, 0.250–0.500 inch |
| Shuttle valves | Shuttle valves with spring, with detent, selective or reverse |
| Visco Jet | Flow restrictor with reduced sensitivity to viscosity |
| Floserts | Elements for constant flow over a wide range of pressures |
| Xover | 2/3-way isolation solenoid valve, with pinch tube |
| Etched Safety Screen | Pleated safety filter, with high retention capacity |
Where is The Lee Company equipment used?
- General industry and off-highway machinery — hydraulic blocks with plugs and check valves
- Oil and gas — valves for high-pressure media and aggressive fluids
- Power generation — fluid control in plants with high pressure and temperature
- Scientific instruments — isolation solenoid valves, metering pumps and filters
- Automotive industry — lubrication nozzles, valves and miniature components
How do we supply The Lee Company in Romania?
We can quote Lee components for hydraulic blocks and miniature circuits: plugs, check and shuttle valves, flow restrictors, solenoid valves and nozzles. Standard Lee components can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise we supply them to order, usually in 1–4 weeks. For special versions, depending on the specification, the lead time can be longer. For a correct request we need the full code on the part, the type of fluid, the working pressure and temperature, the flow, the size of the cavity or passage and, for a solenoid valve, the coil voltage and the connector type.
The equivalence of one part with another is determined from the full code, because the size of the cavity and the opening pressure are part of identifying the part.
Frequently asked questions about The Lee Company
What does The Lee Company make?
Lee makes miniature fluid control components: plugs for sealing hydraulic blocks, check valves, shuttle and relief valves, flow restrictors, solenoid valves, nozzles, safety filters and metering pumps. They are fitted directly into blocks and housings, for circuits with little space and high reliability requirements.
How do I choose a Lee check valve by flow and pressure?
The poppet valve gives up to 3.5 times more flow than the ball type, at the same diameter, in sizes of 0.125–1 inch. For high-pressure media there is the extreme version, up to 15,000 psi, and for zero leakage, the one with elastomer sealing. We need the fluid, the pressure, the flow and the available cavity.
Do you supply Lee in Romania, and how fast?
Yes; Lee plugs and valves: 24–72 h when the item is in stock, locally or at the supplier; otherwise, to order, usually 1–4 weeks. For special versions, large quantities or configured solenoid valves, depending on the specification, the lead time can be longer, confirmed in the quotation.
Can I replace a plug or a check valve with a Lee model?
It is checked against data: the size of the cavity or hole, the material, the opening or check pressure, the flow and the fluid. Send us the code engraved or marked on the old part, or the drawing of the block. Equivalences between brands are established from this data; based on it we determine which Lee series fits.
What do I need to send for a quotation on a Lee solenoid valve or metering pump?
The fluid and compatible materials, the pressure, the flow or metered volume (for example 10–175 µL for fixed-volume pumps), the coil voltage, the connector type and the method of mounting in a block or on a manifold. For isolation valves, also state how aggressive the fluid is.
How do I request a The Lee Company quotation?
Send the The Lee Company code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: The Lee Company (manufacturer documentation)

