Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Lenord, Bauer & Co. supplier in Romania

For Lenord+Bauer we quote GEL 247 and GEL 2475 speed sensors, GEL 2475CM condition sensors, MiniCODER GEL 2432 and GEL 2444 encoders and GEL 260 encoders; for a quotation we need the output type, the connector and the mounting position.

Headquarters: Oberhausen, Germany

Request a quote

Who is Lenord, Bauer & Co. and what does it make?

Lenord, Bauer & Co. (Lenord+Bauer) is a German manufacturer of sensors and encoders based in Oberhausen, which started from electricity meters and magnetic incremental encoders. For rail rolling stock it offers speed sensors and bearingless encoders for safety-critical odometry, sensors for wheel slip protection and condition monitoring sensors (acceleration, vibration, shock and temperature). On locomotives, multiple units and metro trains, this is where the sensors mounted on the axle or the axle box are found, and replacing them requires the exact code, the connector and the mounting position.

The GEL 247 and GEL 2475 series are Hall-effect speed sensors, with one or two channels, with voltage or current output and idle voltage, free of wear, which magnetically scan target discs made of ferromagnetic material. The frequency range reaches 25 kHz for the GEL 247 and 20 kHz for the GEL 2475, from slow rotation (0 Hz) to high speeds, with detection of the direction of rotation and of standstill. The GEL 2475CM (CombiCODER) adds condition monitoring, and the GEL 2432 and GEL 2444 are MiniCODER encoders with a sin/cos or TTL interface for installation in very small spaces. The GEL 211 is the mobile service unit for parameterisation.

The company also offers bearingless absolute encoders, GEL 260 magnetic incremental encoders (with IP 54, optional approvals for explosion-risk areas, according to the manufacturer's documentation) and Pt100/Pt1000 temperature sensors from the GEL 2161 series. In rail applications, the sensors support systems such as ETCS, CBTC and PTC, and the company holds certifications stated in the manufacturer's technical documentation. For replacing an older sensor that is outside current production, the offer starts from the nameplate, the connector type and the mounting position.

What do we supply from the Lenord, Bauer & Co. range?

ProductDescription
GEL 247 and GEL 2475Hall-effect speed sensors, with 1 or 2 channels, with voltage or current output and idle voltage. They scan ferromagnetic target wheels, free of wear, from 0 Hz up to 25 kHz (GEL 247) or 20 kHz (GEL 2475).
GEL 2475CM — CombiCODERCondition monitoring sensor for rail applications, which collects the speed and the mechanical quantities relevant to the condition of the axle and the bogie. It can support the early identification of unstable bogie behaviour and wheel defects, before damage occurs.
GEL 2432 and GEL 2444 — MiniCODERBearingless encoders with magnetic reading, with a sin/cos or TTL interface, for speed and position. The GEL 2444 has safety functions, and commissioning is done with the GEL 211 mobile unit.
GEL 260 and bearingless absolute encodersThe GEL 260 is a robust magnetic incremental encoder, with IP 54, optional approvals for explosion-risk areas, according to the manufacturer's documentation, and a resolution of up to 273,408 pulses per revolution. Absolute encoders provide the position immediately at start-up, without a reference run.

Why Lenord, Bauer & Co.?

  • GEL 247 and GEL 2475 Hall sensors for speeds from 0 Hz to 25 kHz — they also detect the direction of rotation and standstill at start
  • Wear-free and maintenance-free, through magnetic scanning — they suit axles and axle boxes with vibration and varying temperatures
  • GEL 2475CM (CombiCODER) with condition monitoring — unstable bogie behaviour and wheel defects can be detected
  • MiniCODER GEL 2432 and GEL 2444 encoders with sin/cos or TTL — they fit in tight spaces, with parameterisation through the GEL 211

Which Lenord, Bauer & Co. codes and series are requested most often?

CodeDescription
GEL 247Hall speed sensor, 0 Hz to 25 kHz
GEL 2475Hall speed sensor, 0 Hz to 20 kHz
GEL 2475CMCombiCODER, condition monitoring
GEL 2432MiniCODER with sin/cos or TTL
GEL 2444Sin/cos MiniCODER with safety functions
GEL 260Magnetic incremental encoder, up to 273,408 pulses/rev
GEL 2161Pt100/Pt1000 resistance thermometer, -40 to +250 °C
GEL 211Mobile service unit for parameterisation
Bearingless absolute encodersAbsolute position 0–360° without a reference run

Where is Lenord, Bauer & Co. equipment used?

  • Rail rolling stock — odometry, slip protection and condition monitoring
  • Metro and tram — speed sensors for traction and braking
  • Measuring and track maintenance trains — distance and positioning
  • Heavy industry — magnetic encoders for harsh environments
  • Drives and energy storage — sensors for flywheels and shafts

How do we supply Lenord, Bauer & Co. in Romania?

We can check the quotation for Lenord+Bauer speed sensors and encoders starting from the nameplate of the existing sensor or from the vehicle record. We supply to order, usually 1–4 weeks; for versions configured for a fleet, the lead time may be longer. For a correct quotation, send us the type (for example GEL 247), the connector type or the cable length, the output (voltage, current, sin/cos), the module of the target wheel, the mounting position and the quantity.

Sensors for rolling stock are usually approved per vehicle type, so the acceptance of a sensor in a fleet is confirmed on the basis of the documentation and the operator's requirements.

Frequently asked questions about Lenord, Bauer & Co.

What does Lenord, Bauer & Co. make for rail?

Lenord+Bauer makes speed sensors and bearingless encoders for safety-critical odometry, wheel slip protection, condition monitoring (vibration, shock, temperature) and ETCS and CBTC applications. The company is based in Oberhausen, Germany.

How do I choose between the GEL 247 and the GEL 2475?

Both are Hall sensors with 1 or 2 channels, free of wear; the GEL 247 reaches 25 kHz, the GEL 2475 20 kHz. What matters is the target wheel (the module), the mounting distance, the output type and the connector. Send us the nameplate of the current sensor and the target wheel data.

How long does it take to bring a Lenord+Bauer sensor to Romania?

This brand's sensors are supplied to order, usually in 1–4 weeks. For versions configured for a fleet or with a special cable, the lead time may be longer, depending on the specification; the date is confirmed in the quotation.

Can I replace an older Lenord+Bauer sensor?

The company offers replacement solutions for sensors withdrawn from the market, with retrofitting without major design changes, but compatibility is checked case by case. Send the code from the nameplate, the connector type and photos of the installation, so that we check a current version.

What data should I send for a quotation on a MiniCODER encoder?

We need the model (GEL 2432 or GEL 2444), the interface wanted (sin/cos or TTL), the interpolation factor, the module of the target wheel (0.5 or 1.0), the cable length and the quantity. For parameterisation, the GEL 211 service unit is also mentioned.

How do I request a Lenord, Bauer & Co. quotation?

Send the Lenord, Bauer & Co. code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Lenord, Bauer & Co. GmbH (manufacturer documentation)