Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

MEDENUS supplier in Romania

Gas pressure regulators and safety valves

Founded in 1972 · Headquarters: Olpe, Germany

Request a quote

Who is MEDENUS and what does it make?

MEDENUS Gas-Druckregeltechnik is a German company, founded in 1972 in Rösrath, near Cologne, whose production is now at Olpe, in South Westphalia, where a new site has been built since 2019. It specialises in gas pressure regulators and their safety accessories, that is, the set of valves and fittings that lower the natural gas pressure at the inlet of an industrial station, a network or a consumer and protect it against overpressure.

The range is built as a chain. The direct-acting regulators (R 50, R 51, R 100, R 101, R 105) are complemented by regulators with an integrated safety valve (RS 250, RS 251, RS 254, RS 255) and by pilot-operated regulators (RP 105, RSP 254/255). The RSP 254/255 series works at outlet pressures between 10 mbar and 12 bar, with an accuracy class of up to 1% and inlet pressures of up to 16 bar; RSP 254 comes with flanges from DN 25 to DN 200, and RSP 255 from DN 50 to DN 100. The S 104 safety shut-off valve is supplied from DN 25 to DN 200, with a working pressure of up to 16 bar and approvals according to the manufacturer's documentation, the SL 5 relief valve takes up small pressure increases, and the DF 50 cell filter retains dust and welding residues. There are also gas ball valves and turbine meters. The range is hydrogen-ready, for regulation up to 16 bar.

These valves and fittings are installed in regulating and metering stations, at industrial consumers, in heating plants and in distribution networks.

What do we supply from the MEDENUS range?

ProductDescription
R 50, R 51, R 100, R 101, R 105 regulatorsDirect-acting gas pressure regulators, from threaded to flanged versions, for regulating stations, industrial consumers and networks with small and medium flow rates.
RS 250–255 regulators with integrated safety and RSP 254/255 pilot-operated regulatorsRegulators with a safety shut-off valve in the same body (RS) or with a pilot (RSP), with flanges from DN 25 to DN 200, for outlet pressures of 10 mbar–12 bar.
S 104 safety valve and SL 5 valveS 104 is the safety shut-off valve, DN 25–DN 200, up to 16 bar; SL 5 is a spring-loaded relief valve for small pressure increases, so that they do not trigger the shut-off.
DF 50 cell filters and gas ball valvesFilters that retain dust and welding residues in gas lines, installed upstream of regulators and meters, plus ball valves for isolating sections.

Why MEDENUS?

  • A complete regulation chain: regulator, integrated or separate safety valve, filter and ball valve, all from the same range
  • RSP 254/255 with pilot — outlet pressure from 10 mbar to 12 bar, accuracy class up to 1%, inlet up to 16 bar
  • S 104 with approvals according to the manufacturer's documentation — DN 25–DN 200, for stations where the standard requires safety shut-off
  • Parts identifiable by serial number — makes ordering parts for older units easier
  • Hydrogen-ready range, for regulation up to 16 bar

Which MEDENUS codes and series are requested most often?

CodeDescription
R 50Gas pressure regulator, threaded
R 51Gas pressure regulator
R 100Gas pressure regulator
R 100 UDVacuum regulator
R 101Gas pressure regulator
R 101 USPressure relief valve
R 105Gas pressure regulator
RS 250Regulator with integrated safety shut-off valve
RS 254Regulator with integrated safety shut-off valve
RP 105Pilot-operated regulator with auxiliary energy
RSP 254Pilot-operated regulator with safety, DN 25–DN 200
RSP 255Pilot-operated regulator with safety, DN 50–DN 100
S 104Safety shut-off valve, DN 25–DN 200, up to 16 bar
SL 5Spring-loaded relief valve for small pressure increases
DF 50Gas filter for dust and welding residues

Where is MEDENUS equipment used?

  • Natural gas distribution — regulating stations and service connections
  • Industrial consumers — regulating and metering stations at the plant inlet
  • Heating plants and cogeneration — fuel gas regulation
  • Biomethane and hydrogen — networks with hydrogen-ready gas
  • Process installations — pressure regulation of neutral, non-corrosive gas

How do we supply MEDENUS in Romania?

We can quote MEDENUS gas pressure regulators, safety valves, filters and ball valves, as well as parts for existing units. The valves and fittings are supplied to order; usually 1–4 weeks for parts and common valves, while special configurations may take longer. For a correct quotation we need: the model and the serial number from the nameplate, the inlet and outlet pressures, the gas flow rate, the nominal diameter and the connection type (thread or flange), the gas (natural, hydrogen, other neutral gas) and the standards required (DVGW, CE). The exact lead time is confirmed in the quotation.

Whether an older model is still in current production is checked from its serial number, which is also the basis for parts compatibility.

Frequently asked questions about MEDENUS

What products does MEDENUS make?

MEDENUS, of Olpe (Germany), was founded in 1972 and makes gas pressure regulators (R, RS, RP, RSP), safety shut-off valves (S 104), relief valves (SL 5), cell filters (DF 50), gas ball valves and turbine meters.

How do I choose between an R 100 regulator and a pilot-operated RSP 254?

Direct-acting regulators suit moderate flow rates and accuracy requirements. The pilot-operated RSP 254/255 series is chosen when the outlet pressure must be held in the 10 mbar–12 bar range, with accuracy of up to 1%, or when the flow rate and diameter are larger (up to DN 200). We need the actual pressures and flow rate.

Can you supply MEDENUS valves and fittings in Romania and within what lead time?

Yes, MEDENUS valves and fittings are supplied to order. Usual parts and valves take 1–4 weeks as a rule; special versions may take longer, confirmed in the quotation after the configuration is checked.

Can I replace an old MEDENUS regulator with a current model?

Parts for older units are identified by serial number. Send the serial number and the model from the nameplate, the working pressures and the diameter, and we check whether there are parts or a variant that takes over the function; equivalence is confirmed from these data.

What data do I need to send for a gas regulator quotation?

Send the gas (natural, hydrogen, other neutral gas), the minimum and maximum flow rate, the inlet pressure and the outlet pressure required, the diameter and connection type, whether the regulator needs an integrated safety valve and the applicable standards. For a replacement, add the model from the nameplate.

How do I request a MEDENUS quotation?

Send the MEDENUS code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: MEDENUS Gas-Druckregeltechnik GmbH (manufacturer documentation)