Metrel supplier in Romania
Instruments for testing and verifying electrical installations
Headquarters: Horjul, Slovenia
Who is Metrel and what does it make?
Metrel is a Slovenian manufacturer of instruments for testing and verifying electrical installations, based at Horjul, near Ljubljana. The range covers multifunction installation testers, power quality analysers, PAT testers for portable equipment and testers dedicated to medical equipment, alongside digital multimeters, clamp meters and thermal cameras. From the Metrel portfolio we can quote test instruments for licensed electricians and periodic verification laboratories, depending on the type of installation being verified.
The EurotestXD (model MI 3155) and EurotestXC (MI 3152) series are multifunction testers for the complete verification of electrical installations — insulation resistance, continuity, fault current, loop impedance — while the EurotestEASI series (MI 3107) covers basic verifications. The products are built for compliance with the IEC 61557 series of standards for testing electrical installations.
For the Romanian market, Metrel makes sense for ANRE-licensed electrician companies and PRAM periodic verification laboratories, where the test instrument has to cover all the tests required by the regulation for verifying electrical installations.
What do we supply from the Metrel range?
| Product | Description |
|---|---|
| EurotestXD multifunction tester (MI 3155) | Top multifunction tester of the range for the complete verification of electrical installations — insulation resistance, continuity of the protective connection, fault loop impedance, trip current of residual current devices — with result storage for the verification report. It is used at commissioning of new installations and for the periodic verifications required by electrical regulations. For a quotation, the customer must confirm whether additional accessories (probes, adapters) are needed besides the base unit. |
| EurotestEASI Touch multifunction tester (MI 3107) | Multifunction tester with touch screen for basic verifications of electrical installations, designed for electricians who do not need all the functions of the other testers in the range. It covers the usual tests of insulation resistance, continuity and residual current trip current. The customer must state the applicable verification standard (for example, domestic or industrial installations). |
| Power Master power quality analyser (MI 2892/MI 2992) | Power quality analyser for measuring harmonics, phase imbalance and other network parameters, used to troubleshoot power quality problems in industrial or commercial installations. It is typically used where equipment fails repeatedly or energy consumption is abnormal without an obvious cause. For a quotation, the customer must state the network type (single-phase/three-phase) and the monitoring duration wanted. |
| OmegaEE XD PAT tester (MI 3365) | Tester for the periodic safety verification of portable electrical equipment (PAT), used by maintenance and service companies to document the compliance of power tools, extension leads and mobile equipment across a company. It is used for the periodic verifications required by internal health and safety policies. The customer must state the approximate number of items to be tested per verification cycle. |
Why Metrel?
- Range of testers for electrical installations — from basic verification to power quality analysis
- EurotestXD/XC multifunction testers for all the tests required at commissioning and periodic verification of installations
- Products built for compliance with the IEC 61557 series of standards on testing electrical installations
- Dedicated PAT testers for the periodic verification of portable electrical equipment
Which Metrel codes and series are requested most often?
| Code | Description |
|---|---|
| MI 3155 EurotestXD | Multifunction tester for electrical installations, with advanced measuring functions |
| MI 3152 EurotestXC | Compact multifunction tester for verifying electrical installations |
| MI 3152H EurotestXC 2.5 kV | EurotestXC variant with high-voltage insulation test |
| MI 3136 EurotestCOMBO XC | Combined tester for electrical installations and residual current devices |
| MI 3107 EurotestEASI Touch | Multifunction tester with touch screen for electrical installations |
| MI 3102H BT EurotestXE 2.5 kV | Tester with Bluetooth and high-voltage insulation test |
| MI 3102 BT EurotestXE | Multifunction tester with Bluetooth connection for electrical installations |
| MI 3100 SE EurotestEASI | Basic multifunction tester for verifying electrical installations |
| MI 3125 BT EurotestCOMBO | Combined tester with Bluetooth for installations and residual current protection |
| MI 3125 EurotestCOMBO | Combined tester for electrical installations and protective devices |
| MI 3116 PV Analyser XA | Analyser dedicated to testing photovoltaic installations |
| MI 3365 OmegaEE XD | PAT tester for verifying the safety of portable electrical equipment |
| MI 6601 MediTest | Tester for verifying the safety of medical equipment |
| MI 2992 Power Analyser | Power quality analyser, class A |
| MI 2892 Power Master | Multifunction power quality analyser |
Where is Metrel equipment used?
- Periodic verification of electrical installations — licensed firms and PRAM laboratories
- Photovoltaic installations — testing of direct current and alternating current systems
- Industrial maintenance — power quality troubleshooting and PAT verifications
- Healthcare — dedicated testers for medical equipment
- Transport infrastructure and e-mobility — testing of installations and charging stations
How do we supply Metrel in Romania?
For Metrel we work from the manufacturer's technical documentation; we state lead time and availability in the quotation. We bring in the testers to order through EU supply channels, usually in 1–4 weeks from order confirmation. For a correct quotation, the customer must send us the model wanted or, if unknown, the type of verifications to be made (electrical installations, PAT, power quality) and the applicable regulation. We do not promise permanent availability from stock on any Metrel model and we do not offer calibration of instruments already in the customer's possession.
We do not carry out the metrological calibration of Metrel instruments ourselves.
Frequently asked questions about Metrel
What is the difference between the Metrel MI 3155 EurotestXD and the MI 3107 EurotestEASI Touch testers?
MI 3155 EurotestXD belongs to the upper range, with extended measuring functions. MI 3107 EurotestEASI Touch adds a touch screen for faster menu navigation, while keeping most of the basic functions for verifying electrical installations. The choice between the two depends on the complexity of the installations tested daily and on the equipment budget available.
Do you supply Metrel measuring instruments in Romania?
Yes, we bring in to order multifunction testers, network analysers and PAT testers from the Metrel portfolio, starting from the exact code requested. We do not hold this range on our own shelves; to order, usually 1–4 weeks from order confirmation. We recommend stating the applicable verification standard and the accessories needed, such as specific probes or adapters.
What should I specify for a quotation on a Metrel tester?
It helps to mention the type of verification wanted — electrical installations, equipment or photovoltaic panels — since each direction has its own range of testers. It also matters whether a Bluetooth connection is needed for fast data transfer, or integration with Metrel Cloud for managing reports. The local verification standard applicable to the installation helps in choosing the right model.
What is the Metrel Power Master series?
Power Master, also known as MI 2892, is a power quality analyser used for monitoring network parameters over extended periods. It measures harmonics, voltage imbalances and other phenomena that affect equipment connected to the network. It is useful in energy audits or in identifying the causes of recurring failures of industrial equipment sensitive to supply quality.
How do I request a Metrel quotation?
Send the Metrel code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Metrel, Metrel d.o.o., Distek (manufacturer documentation)