Omniseal Solutions supplier in Romania
For Omniseal Solutions we quote spring-energized seals with 103A, 400A, APS or RACO springs, polymer shaft seals and metal seals; we need the gland drawing, the pressure, the temperature and the medium.
Who is Omniseal Solutions and what does it make?
Omniseal Solutions makes seals from engineering polymers and metal for conditions where ordinary elastomer gaskets do not hold up: cryogenic or very high temperatures, high pressures, aggressive media, vacuum. The main product is the spring-energized seal: a jacket made of PTFE, PEEK, UHMW-PE or Meldin polyimide, with a metal spring that keeps the lips pressed against the gland walls and compensates for wear and eccentricity. For a quotation, send us the gland drawing or dimensions, the pressure, the temperature, the medium and the type of motion (static, rotary, reciprocating).
Spring-energized seals work between −268 °C and +316 °C, from vacuum up to 3448 bar, at diameters of 5–3000 mm and dynamic speeds of up to 1 m/s, with a standard or ground lip. The jackets are made from over 500 polymer blends developed in-house, including PFAS-free versions, and the springs are made of 300 series and 17-7 PH stainless steels or of cobalt- or nickel-based alloys. Four spring types cover the working regimes: 103A, with a helical band, for static applications and low speeds at high pressures and low temperatures; 400A, V-shaped; APS, coiled; RACO, U-shaped. The seals have no shelf-life limit.
The polymer range also includes polymer lip shaft seals, which cover the gap between elastomer lip seals and mechanical seals and are self-lubricating and chemically inert, plus bearings, diaphragms and piston rings. Axial, face or special metal seals, machined or formed, work between −250 °C and +1100 °C and up to 100,000 psi, with clamping forces of up to 150 N/mm and with coatings that compensate for small surface imperfections. Typical industrial applications are in oil and gas, energy, semiconductors and process equipment.
What do we supply from the Omniseal Solutions range?
| Product | Description |
|---|---|
| Spring-energized seals | Jackets made of PTFE, PEEK, UHMW-PE or Meldin with a metal spring, for −268 °C…+316 °C, vacuum…3448 bar, diameters of 5–3000 mm and speeds of up to 1 m/s. They replace elastomer O-rings where these degrade. |
| 103A, 400A, APS and RACO springs | Four spring designs: 103A with a helical band for static applications and low speeds at high pressures and low temperatures, 400A V-shaped, APS coiled and RACO U-shaped, chosen by friction and the lip load wanted. |
| Polymer shaft seals | Rotary seals with a polymer lip, self-lubricating, wear-resistant and chemically inert, used between elastomer lip seals and mechanical seals, on shafts that run at high temperatures or with aggressive media. |
| Metal seals | Axial, face or special seals, machined or formed, for −250 °C…+1100 °C and up to 100,000 psi, with coatings or platings that compensate for surface imperfections, including versions for AS5202 fittings. |
Why Omniseal Solutions?
- Range from −268 °C to +316 °C and from vacuum to 3448 bar — a single design for cryogenics and high pressure
- Over 500 polymer blends, including PFAS-free — the jacket material is chosen by the medium
- Four spring types (103A, 400A, APS, RACO) — the lip load is matched to static, dynamic or cryogenic duty
- Diameters from 5 to 3000 mm — for shafts, rods and flanges of very different sizes
- Metal seals up to +1100 °C — for fittings and flanges where polymers no longer hold up
Which Omniseal Solutions codes and series are requested most often?
| Code | Description |
|---|---|
| 103A | Spring-energized seal with helical band spring, static and low speeds |
| 400A | V-spring spring-energized seal |
| APS | Coiled-spring spring-energized seal |
| RACO | U-shaped spring spring-energized seal |
| PTFE jacket | Jacket material for spring-energized seals |
| PEEK jacket | Jacket material for high pressures and temperatures |
| UHMW-PE jacket | Wear-resistant jacket material |
| Meldin | Polyimide for high-temperature jackets |
| Metal Boss Seals AS5202 | Special metal seals for AS5202 fittings |
Where is Omniseal Solutions equipment used?
- Oil and gas — seals for valves and high-pressure equipment
- Energy — metal seals for very high temperatures and pressures
- Semiconductors — seals for manufacturing equipment
- Liquefied gases and cryogenics — spring-energized seals for very low temperatures
- Chemical process equipment — jackets made of polymers inert to aggressive media
How do we supply Omniseal Solutions in Romania?
We can quote Omniseal spring-energized seals, polymer shaft seals and metal seals, as spare parts by code or by drawing. The following help us: the gland drawing with tolerances, the working pressure and temperature, the medium, the type of motion and the speed, and the material and hardness of the surfaces in contact; for a replacement, the code on the packaging or in the equipment documentation is enough. Supplied to order; for current sizes the lead time is usually 1–4 weeks, while seals designed from a drawing can have, depending on the specification, a longer lead time. The exact lead time is given in the quotation.
The jacket material and the spring type are established from the pressure, the temperature, the medium and the type of motion in your application.
Frequently asked questions about Omniseal Solutions
What does Omniseal Solutions make?
Omniseal Solutions makes spring-energized seals from PTFE, PEEK, UHMW-PE and Meldin, polymer lip shaft seals, bearings, diaphragms and piston rings from engineering polymers, as well as axial and face metal seals for very high temperatures and pressures.
How do I choose the spring type for an Omniseal seal?
The 103A spring, with a helical band, is used for static applications and low speeds, at high pressures and low temperatures. For low friction in motion or heavy loads in cryogenics, other designs are chosen (400A, APS, RACO). Send us the working regime and we propose the version.
What lead time applies to Omniseal seals?
To order, usually in 1–4 weeks for current sizes, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. For seals designed from a drawing, depending on the specification, the lead time can be longer.
Can I replace a failing O-ring with a spring-energized seal?
Often yes, but the gland must be checked: a spring-energized seal has different mounting dimensions than an O-ring. Send us the gland drawing, the pressure, the temperature and the medium, and we check whether it can be fitted in the existing gland or whether an adaptation is needed.
What data do I send for an Omniseal seal quotation?
The gland drawing with tolerances, the diameters, the type of motion (static, rotary, reciprocating) and the speed, the pressure, the minimum and maximum temperature, the medium, the material of the surfaces in contact and the quantity needed. If the seal replaces an O-ring, send its dimensions too.
How do I request a Omniseal Solutions quotation?
Send the Omniseal Solutions code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Omniseal Solutions (manufacturer documentation)

