Pixsys supplier in Romania
For Pixsys we quote ATR121, ATR621, ATR264 and ATR464 controllers, the DRR450 module coupled to solid-state relays, KTD multi-loop controllers for furnaces and the CNV580 gateway; we need the full code, the input type and the supply.
Headquarters: Mellaredo di Pianiga, Italy
Who is Pixsys and what does it make?
Pixsys, from Mellaredo di Pianiga, in the province of Venice, offers industrial automation equipment built around temperature and process control. The range goes from PID controllers and panel indicators to PLCs, HMI panels, Panel PCs, I/O modules, signal converters, sensors, solid-state relays (SSR), inverters and network analysers.
The ATR121 controller has a 32 × 74 mm panel format, a 16-bit analogue input for K, S, R, J thermocouples, PT100 resistance thermometers or 0..10 V and 0/4..20 mA signals, plus 8 A and 5 A relay outputs. The algorithms are ON-OFF, P, PI, PID and PD, with dual PID for heating and cooling and soft start with gradient. DRR450 is a DIN rail controller, 22.5 mm wide, that couples directly to a single-phase SSR module and monitors temperature and current on installations with several zones, through RS485 Modbus RTU.
For processes and furnaces there is the ATR902, a portable process controller, the ATR621 in 72 × 72 mm format, the ATR264 and ATR464 programmers and the KTD multi-loop system for industrial furnaces. The range also includes the PLX800 as an edge device, HMI with CODESYS, plug-in and remote I/O modules and the CNV580 IIoT modem. For a quotation send the full code from the controller.
What do we supply from the Pixsys range?
| Product | Description |
|---|---|
| ATR121 and DRR450 PID controllers | ATR121 is a 32 × 74 mm panel controller, with a 16-bit universal input and relay outputs. DRR450 mounts on a DIN rail, works at 24 V DC, couples directly to an SSR module and communicates through RS485 Modbus RTU. |
| ATR902, ATR621, ATR264, ATR464 process controllers | ATR902 is a portable process controller, ATR621 has a 72 × 72 mm format, and ATR264 and ATR464 are programmers in 48 × 48 mm and 48 × 96 mm formats, used when temperature follows a curve over time. |
| KTD multi-loop system | KTD410, KTD710 and KTD820 are multi-loop systems for industrial furnaces. The versions are specified in the quotation, based on the number of zones of the furnace. |
| PLC, HMI, I/O and gateways | The range also includes the PLX800 edge device, HMI with CODESYS, HTML5 web panels, Panel PCs, plug-in and remote I/O modules, signal converters and the CNV580 IIoT modem, for automation that goes beyond simple control. |
Why Pixsys?
- 32 × 74 mm panel format on the ATR121 — it fits machines with little space in the cabinet
- 16-bit universal input — the same controller reads thermocouples, PT100 and current or voltage signals
- DRR450 couples directly to the SSR module — fewer cables between the controller and the solid-state relay
- Dual PID for heating and cooling, with soft start — heating and cooling are controlled from the same device
- Configuration with MyPixsysLab software and a memory card — parameters are copied from one device to another
Which Pixsys codes and series are requested most often?
| Code | Description |
|---|---|
| ATR121 | 32 × 74 mm panel PID controller, 16-bit analogue input, relay outputs |
| ATR121-AD | ATR121 version with 12..24 V AC/DC supply |
| ATR121-B | ATR121 version with 230 V AC supply |
| DRR450 | DIN rail PID controller, coupled directly to the SSR module, RS485 Modbus RTU |
| ATR902 | Handheld process controller |
| ATR621 | 72 × 72 mm process controller |
| ATR264 | 48 × 48 mm programmer |
| ATR464 | 48 × 96 mm programmer |
| KTD410 | Multi-loop system for industrial furnaces |
| KTD710 | Multi-loop system for industrial furnaces |
| KTD820 | Multi-loop system for industrial furnaces |
| CNV580 | IIoT modem from the converters and gateways family |
Where is Pixsys equipment used?
- Plastics extrusion and injection — temperature control by zones
- Packaging — temperature controllers for packaging lines
- Furnaces and dryers — programmable controllers and multi-loop systems
- Textile machines — temperature control on several zones
- Heat treatment — keeping the temperature curve by zones
How do we supply Pixsys in Romania?
We can quote ATR and DRR450 controllers, KTD systems, I/O modules, signal converters and, on request, compatible solid-state relays. For an exact quotation we need the full code from the device, for example ATR121-AD or ATR121-B, which differ in supply, the type of sensor connected and the outputs needed. If you are replacing an existing controller, send a photo of the nameplate and the size of the panel cut-out. For Pixsys, items are supplied to order, usually in 1–4 weeks; the exact lead time appears in the quotation.
Supply and output versions are fixed by the full code, so we quote after we see the label or the diagram of the current device.
Frequently asked questions about Pixsys
What are the ATR264 and ATR464 programmers and the KTD410, KTD710 and KTD820 systems at Pixsys?
Pixsys offers PID controllers, programmers and indicators, but also PLCs, HMI with CODESYS, Panel PCs, I/O modules, signal converters and gateways, temperature and pressure sensors, solid-state relays, inverters and single-phase and three-phase network analysers. The headquarters is in Mellaredo di Pianiga, Italy. ATR264 is a 48 × 48 mm programmer, ATR464 a 48 × 96 mm one, and KTD410, KTD710 and KTD820 are multi-loop systems for industrial furnaces.
How do I choose between an ATR121 and a DRR450?
ATR121 mounts in a 32 × 74 mm panel cut-out and has a three-digit display. DRR450 mounts on a DIN rail, has no display and couples directly to an SSR module, so it suits cabinets with many zones. Send the mounting type, the sensor and the load controlled.
Do you supply Pixsys equipment in Romania, and how fast?
Pixsys equipment reaches Romania to order, usually in 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. Special configurations may need more time, and the exact date appears in the quotation.
Can I replace an older ATR121 controller with a current version?
Yes, after checking the full code and the panel format. Differences appear in supply, 12..24 V AC/DC or 230 V AC, in the output type and in the sensor accepted. Send a photo of the label and the connection diagram, and we confirm in the quotation which version fits.
What data do you need for an ATR621 or ATR902 controller?
The full code from the device is enough. If you do not have it, send the sensor type, for example K thermocouple or PT100, the temperature range, the supply available, the outputs needed, relay or SSR drive, and the size of the cut-out or the DIN rail version. ATR621 is a 72 × 72 mm process controller, and ATR902 is a handheld process controller.
How do I request a Pixsys quotation?
Send the Pixsys code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Pixsys (manufacturer documentation)

