PROCON supplier in Romania
positive displacement rotary vane pumps, mag-drive versions, gear pumps, pump-motor assemblies for beverage, espresso, medical, industrial, water treatment
Headquarters: Tennessee, USA
Who is PROCON and what does it make?
PROCON is an American maker of positive displacement rotary vane pumps, based in Tennessee, USA. The origins of the pump go back to 1948, and actual production started two years later. The current range includes the standard pumps of the Series family, the shaft-seal-free mag-drive versions of the Mag family, external gear pumps and complete pump-motor assemblies, used in espresso machines, beverage dispensers, medical equipment and small water treatment stations. From this range we can quote the standard and mag-drive versions for beverage and water filtration installations in Romania.
What sets PROCON pumps apart is the rotary vane principle, which provides a relatively constant flow even with small pressure variations, without the pulsations of a piston pump. The Mag family eliminates the mechanical shaft seal through a magnetic coupling between the motor and the rotor, useful where a leak at the shaft is not acceptable, as in medical equipment or the dosing of food liquids. The published flow rates cover a range from 15 to 660 gallons per hour, with discharge pressures of up to 250 psi, and the connection ports are NPT or G, from 3/8 to 1 inch.
For the Romanian market, PROCON pumps make sense in coffee and beverage equipment, in food industry dispensers and in small water treatment installations, where the mounting space is limited and the pump has to run continuously. Choosing the model starts from the flow required and the chemical compatibility of the fluid.
What do we supply from the PROCON range?
| Product | Description |
|---|---|
| Standard Series 1–7 pumps | The basic family of PROCON rotary vane pumps, with flow rates between 15 and 660 gallons per hour and discharge pressures of up to 250 psi, depending on the model. The connection ports are NPT or G, from 3/8 to 1 inch. Used, among others, in espresso machines and beverage dispensers. |
| Mag-Drive pumps, Mag series | Version without a mechanical shaft seal, with magnetic coupling between the motor and the rotor — a solution for fluids where a leak at the shaft is not acceptable. The family covers the models Mag 2, Mag 3, Mag 5, Mag 11, Mag 207 and Mag 215, with increasing flow rates. Typical application: medical equipment and dosing of food liquids. |
| External gear pumps, Co series | External gear pump, suitable for fluids more viscous than water. |
| Pump-motor assemblies for specific applications | Complete pump plus motor configurations, assembled for beverage, espresso, medical, industrial and water treatment, with AC motors from the AC PSC family mentioned in the manufacturer's documentation. The customer chooses the pump by the flow required, and the assembly arrives ready to mount, with no separate coupling of the motor to the pump. |
Why PROCON?
- Rotary vanes with relatively constant flow, without the pulsations typical of piston pumps, useful for precise dosing
- The Mag family eliminates the mechanical shaft seal through a magnetic coupling, suitable for medical and food equipment
- Wide flow range, from 15 to 660 gallons per hour, with discharge pressures of up to 250 psi
- Production in Europe as well, at the plant in Ireland, alongside the one in Tennessee, USA
- NPT and G connection ports, from 3/8 to 1 inch, for quick mounting on existing installations
Which PROCON codes and series are requested most often?
| Code | Description |
|---|---|
| Series 1 | rotary vane pump, standard family |
| Series 2 | rotary vane pump, standard family |
| Series 3 | rotary vane pump, standard family STD |
| Series 4 | rotary vane pump, standard family |
| Series 5 | rotary vane pump, standard family STD |
| Series 6 | rotary vane pump, standard family |
| Series 7 | rotary vane pump, standard family |
| Mag 2 | mag-drive pump without shaft seal, low flow |
| Mag 3 | mag-drive pump without shaft seal, Mag family |
| Mag 5 | mag-drive pump without shaft seal, Mag family |
| Mag 11 | mag-drive pump without shaft seal, higher flow |
| Mag 207 | mag-drive pump without shaft seal, extended Mag family |
| Mag 215 | mag-drive pump without shaft seal, extended Mag family |
| Co 207 | external gear pump, for viscous fluids |
Where is PROCON equipment used?
- Food and beverage industry — pumping in espresso machines and carbonated-drink dispensers
- Water treatment — pumping in small filtration and dosing installations
- Medical — fluid pumping, with mag-drive versions without a shaft seal
- Chemicals and printing — pumping of inks and printing solutions
How do we supply PROCON in Romania?
For PROCON we rely on the manufacturer's technical documentation; availability is checked on each request. PROCON pumps are supplied to order, usually in 1–4 weeks. For a quotation we need the exact series — Series, Mag or Co —, the flow wanted in gallons per hour, the working pressure and the chemical compatibility of the fluid pumped.
Warranty service for the PROCON range remains the manufacturer's responsibility; we supply the equipment.
Frequently asked questions about PROCON
What does PROCON make?
PROCON makes positive displacement rotary vane pumps; the origins of the design go back to 1948, and production began in 1950, based in Tennessee, USA. The range includes the standard Series family, the mag-drive Mag family, external gear pumps and complete pump-motor assemblies for beverage, espresso, medical equipment, industry and water treatment.
How do I choose a PROCON pump by series?
Start from the flow required, expressed in gallons or litres per hour, then check the working pressure and the chemical compatibility of the fluid with the pump materials. The Mag series is preferable where a leak at the shaft is not acceptable; the standard Series covers the other usual applications.
Can PROCON be sourced in Romania or Europe?
Yes, to order; the manufacturer also has a production plant in Ireland, in addition to the one in Tennessee, USA, and we bring the pump, usually in 1–4 weeks.
What is the Mag series from PROCON?
The Mag series is the version of the rotary vane pump without a mechanical shaft seal, with magnetic coupling between the motor and the rotor. In the PROCON range, the models Mag 2, Mag 3, Mag 5, Mag 11, Mag 207 and Mag 215 rise in flow steps; the choice depends on the flow and pressure the application needs.
What information do you need for a PROCON pump quotation?
The series or code on the pump label, if any, the flow wanted in gallons or litres per hour, the working pressure and the type of fluid pumped, including the approximate viscosity. If the pump is already fitted in equipment, a photo of the nameplate helps identify the equivalent model quickly.
How do I request a PROCON quotation?
Send the PROCON code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: PROCON Pumps (manufacturer documentation)

