Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Rectifier Technologies supplier in Romania

Rectifier modules, PACQ shelves and battery chargers for direct current

Founded in 1992

Request a quote

Who is Rectifier Technologies and what does it make?

Rectifier Technologies is an Australian power electronics company, incorporated in 1992, that started with switch-mode power supplies for telecommunications in Melbourne and today has offices in Australia (Melbourne), Malaysia (Johor Bahru) and Singapore. Its products are rectifier modules, 19-inch powershelves, and battery chargers or DC systems built from these modules. For a maintenance engineer the main interest is the rectifiers that supply the trip and control circuits in electrical substations, that is, the 110 or 220 V DC source that must be there when a fault occurs.

The design is modular and redundant. The RT11 (2.4 kW, 48 V DC), RT12 (2.4 kW, 120 and 240 V DC) and RT18 (8.6 kW, 240 and 400 V DC) modules are single-phase, isolated and hot-swappable; an MCSU-4 controller adds network connectivity and remote administration. The PACQ shelves, in 4U and 6U versions, reach 19.2 kW at voltages of 12, 24, 32, 48, 120 or 240 V DC, with SNMP, Modbus or DNP3 communication and an automatic battery discharge test. At high power, the 50 kW RT22 module (50–1000 V DC) has approvals, according to the manufacturer's documentation, for fast-charging stations.

Such equipment appears as a battery charger for transformer substations and control rooms, as a DC supply for protection systems and communications, or as a replacement for old chargers in DC panels. For a replacement, the essentials are the nominal battery voltage, the charging current, the type of batteries and the space in the cabinet or rack.

What do we supply from the Rectifier Technologies range?

ProductDescription
RT11, RT12, RT18 rectifier modulesSingle-phase switch-mode rectifiers, isolated, hot-swappable: RT11 (2.4 kW, 48 V DC), RT12 (2.4 kW, 120 and 240 V DC, often used as a charger for trip circuits in substations) and RT18 (8.6 kW, 240 and 400 V DC). They scale in parallel with the MCSU-4 controller.
PACQ PowershelvesModular, fault-tolerant power shelves, in two formats (4U and 6U), for a 19-inch rack with a depth of at least 400 mm. They reach 19.2 kW, with outputs from 12 to 240 V DC and RT9, RT11 or RT12 modules; they are used, among other things, for tripping circuit breakers in substations.
ICERT 1000 and PACQ Flex'ion — battery chargersThe ICERT 1000 is a battery charger and DC UPS made of switch-mode modules, up to 19.2 kW, with outputs of 12 to 240 V DC. The PACQ Flex'ion is a version optimised for FLEX'ION Li-ion batteries from SAFT, with CAN communication with the battery management system.
RT22 high-power modules and 35 kW PFCThe RT22 is a 50 kW isolated, three-phase AC-DC module with an adjustable output of 50–1000 V DC, with approvals, according to the manufacturer's documentation, for fast-charging stations. The 35 kW PFC module produces 950 V DC from a three-phase network, as the input stage for ultra-fast chargers.

Why Rectifier Technologies?

  • Isolated 2.4 kW modules, hot-swappable (RT11, RT12) — replaced without switching off the DC supply, which matters for trip circuits
  • PACQ shelves of 4U or 6U with outputs from 12 to 240 V DC — the same architecture for substations, telecommunications and laboratories
  • SNMP, Modbus and DNP3 communications on the PACQ shelves — they integrate into the remote control systems of power installations
  • Automatic battery discharge test and optional cell monitoring — detects weak batteries before the protection fails
  • The range covers small 2.4 kW modules and 50 kW modules for electric vehicle charging

Which Rectifier Technologies codes and series are requested most often?

CodeDescription
RT9Rectifier module for PACQ shelves
RT11Rectifier module 2.4 kW, 48 V DC
RT12Rectifier module 2.4 kW, 120 and 240 V DC
RT18Rectifier module 8.6 kW, 240 and 400 V DC
RT2250 kW AC-DC module, output 50–1000 V DC
MCSU-4Controller for a modular power system
PACQ 4U4U modular power shelf, up to 19.2 kW
PACQ 6U6U modular power shelf, up to 19.2 kW
PACQ Flex'ionCharger for FLEX'ION Li-ion batteries from SAFT
ICERT 1000Battery charger and DC UPS, up to 19.2 kW

Where is Rectifier Technologies equipment used?

  • Transformer substations — battery chargers for trip and protection circuits
  • Telecommunications — 48 V DC systems with redundant modules
  • Scientific instruments and laboratories — compact DC supplies in a 19-inch rack
  • Electric vehicle charging — 35 and 50 kW AC-DC modules for fast-charging stations
  • Oil and gas — DC supply for remote control installations

How do we supply Rectifier Technologies in Romania?

We can quote Rectifier Technologies rectifier modules, PACQ shelves and chargers, mainly to replace battery chargers already installed. The equipment is supplied to order, usually in 1–4 weeks; for configured systems the lead time can be longer and is confirmed in the quotation. For a correct quotation we need the nominal voltage and type of the battery, the charging current required, the network voltage and frequency, the rack format wanted (4U or 6U) and the communication protocol required. For equipment already installed, a photo of the nameplate or the module code (for example RT12 or ICERT 1000) shortens the check considerably.

The direct successor of an older module, withdrawn from production, with the same size and the same communication, is identified from the data of the module.

Frequently asked questions about Rectifier Technologies

What does Rectifier Technologies make?

Rectifier Technologies, an Australian company established in 1992, makes switch-mode rectifier modules, 19-inch power shelves and battery chargers or DC systems, used in electrical substations, telecommunications, laboratories and electric vehicle charging stations.

How do I choose an RT module for a transformer substation charger?

Start from the nominal battery voltage (for example 110 or 220 V DC), from the charging current plus the permanent consumption of the protections, and from the number of modules needed for redundancy. The 2.4 kW RT12 module covers 120 and 240 V DC, and three or four modules in parallel form a usual stage.

Do you supply Rectifier Technologies equipment in Romania, and how fast?

Yes, supplied to order. The lead time to order is usually 1–4 weeks for standard modules and shelves, and for configured systems it can be longer; the exact value is set in the quotation, after the configuration is checked. For a quotation, also state the working temperature in the cabinet and whether the modules must be hot-swappable.

Can I replace an old charger with a PACQ shelf?

Possibly, but equivalence is confirmed from the data: battery voltage, current, type of batteries, space in the cabinet and the supervision protocol all matter. Send the nameplate and the diagram of the existing charger, and we check the matching 4U or 6U version.

What data do I send for a quotation on a DC system with RT modules?

The output voltage, the total power or current, the redundancy level (N+1 or more), the input network voltage, the rack format and the protocol (SNMP, Modbus or DNP3). If you are replacing a unit, add a photo of the nameplate with the module code.

How do I request a Rectifier Technologies quotation?

Send the Rectifier Technologies code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Rectifier Technologies (manufacturer documentation)