Seipee supplier in Romania
High-efficiency industrial electric motors
Headquarters: Campogalliano (Modena), Italy
Who is Seipee and what does it make?
Seipee is an Italian manufacturer of electric motors headquartered in Campogalliano, in the province of Modena, active in this sector for over five decades. The range covers general-purpose three-phase asynchronous motors, brake motors, single-phase motors, ATEX explosion-proof versions and stainless steel hygienic motors for the food industry. For the Romanian market we can quote motors from the standard industrial series, with emphasis on configurations that fall outside the usual catalogue motor.
What sets Seipee apart is its capacity for customisation — over 1,200 custom configurations a year. The base JM-GM range covers frame sizes from 56 to 450, with an aluminium version for small frames (JM) and a cast iron version for large ones (GM), complemented by the two-speed JMD-GMD version.
For customers in Romania, the range makes sense where the standard catalogue motor does not meet the requirement — unusual frame sizes, medium voltage or stainless steel hygienic construction. We also recommend it for retrofits where an equivalent motor is required, but with a current efficiency class.
What do we supply from the Seipee range?
| Product | Description |
|---|---|
| JM-GM series three-phase asynchronous motors | Motors in standard construction, with the aluminium JM series for frame sizes 56-160 and the cast iron GM series for frame sizes 160-450. S1 duty, class F or B insulation, IP55 protection. This is the base range for pumps, fans and conveyors, and the starting point for any special configuration. For a quotation, the power, speed and frame size must be confirmed. |
| JMD-GMD two-speed motors | A version of the base range with two switchable speeds: aluminium JMD (56-160), cast iron GMD (180-250). Useful where an installation must run at two speed regimes, without a frequency inverter — for example fans with two flow stages. They keep the same insulation class and IP55 protection. Selection requires knowing both speeds needed. |
| iMotor brushless motors | They reach the IE4 efficiency class, with a permanent magnet rotor; the IE4 class is maintained across the whole speed range. Designed for applications where the energy cost over the service life justifies the extra investment compared with an IE3 motor. Operation requires a dedicated variable frequency drive. For a quotation we need the power, speed and type of control. |
| Stainless steel hygienic motors | Built for environments with frequent washdown and strict requirements — the food, pharmaceutical and beverage industries. The stainless steel housing resists corrosion and aggressive cleaning agents, unlike the standard painted cast iron motor. The same frame size logic as the base range is kept. For a quotation, state the power and the type of protection required. |
Why Seipee?
- Wide range of frame sizes, from 56 to 450, in aluminium or cast iron construction.
- Stainless steel hygienic motors, suited to food production lines with frequent washdown.
- ATEX-certified explosion-proof versions for hazardous areas in industry and chemicals.
- iMotor brushless motors of IE4 efficiency, for high energy requirements.
- Customisation capacity — over 1,200 special configurations made every year.
Which Seipee codes and series are requested most often?
| Code | Description |
|---|---|
| JM | Three-phase asynchronous motor, aluminium housing, frame sizes 56-160 |
| GM | Three-phase asynchronous motor, cast iron housing, frame sizes 160-450 |
| JMD | Two-speed motor, aluminium housing, frame sizes 56-160 |
| GMD | Two-speed motor, cast iron housing, frame sizes 180-250 |
| Motori Asincroni Autofrenanti | Asynchronous motor with integrated brake for controlled stopping |
| Motori Asincroni Monofase | Single-phase asynchronous motor for 230V supply |
| Motori Atex Antideflagranti | Seipee motors in ATEX execution for explosive atmospheres |
| Motori Igienici Inox | Motor with stainless steel housing for food lines |
| Motori Media e Alta Tensione | Medium and high voltage motor for high powers |
| Motori Compatti Estrusi | Compact motor, extruded housing, small footprint |
| iMotor | Brushless motor with permanent magnets, IE4 efficiency class |
| Motori a Riluttanza Sincroni | Synchronous reluctance motor, high efficiency |
Where is Seipee equipment used?
- General industry — driving pumps, fans and conveyors with JM-GM motors
- Food and beverage industry — stainless steel hygienic motors resistant to washdown
- Chemicals and petrochemicals — ATEX explosion-proof motors for hazardous areas
- Applications with high energy requirements — iMotor brushless motors of IE4 efficiency
How do we supply Seipee in Romania?
For Seipee we do not keep products on the shelf — we work from the manufacturer's technical documentation and bring in on order the motors from the JM-GM, JMD-GMD and iMotor ranges and the ATEX or stainless steel versions, through EU supply channels. On order, usually 1–4 weeks, depending on the configuration chosen and on confirmation from the Campogalliano factory. For a correct quotation we need the power, speed, frame size and, where relevant, the Ex classification zone or the corrosion resistance requirement. We do not promise a fixed lead time before the manufacturer's confirmation, especially for custom configurations.
For Seipee, we rely on the technical documentation consulted, which describes the product range.
Frequently asked questions about Seipee
What does Seipee make?
Seipee is an Italian manufacturer of electric motors headquartered in Campogalliano, active for over 50 years. The range includes three-phase and single-phase asynchronous motors, two-speed motors, ATEX explosion-proof versions, stainless steel hygienic motors and IE4-efficiency brushless motors.
How do I choose a Seipee motor by frame size?
The aluminium JM series covers frame sizes 56 to 160, and the cast iron GM series covers frame sizes 160 to 450. The choice depends on the power required and the mounting space available.
How do I choose a Seipee motor?
Seipee offers over 1,200 custom configurations a year, and the iMotor brushless motors are IE4 class. The right motor is established from the power, speed, frame size and efficiency class, code by code.
Do you supply Seipee motors in Romania and how long does it take?
Yes, we bring in Seipee motors on order through EU supply channels, usually in 1–4 weeks, depending on the configuration requested. The exact lead time is confirmed after checking availability at the factory.
What data do you need for a Seipee motor quotation?
Send us the power in kW, the working speed, the frame size if you know it and, for special environments, the ATEX protection or corrosion resistance requirement.
How do I request a Seipee quotation?
Send the Seipee code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Seipee S.p.A. (manufacturer documentation)