Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SKF Lubrication supplier in Romania

Greases and automatic lubrication systems

Founded in 1907 · Headquarters: Göteborg, Sweden

Request a quote

Who is SKF Lubrication and what does it make?

SKF makes bearings, but the Swedish company also has a lubrication systems division. SKF Lubrication Systems produces everything from simple manual grease pumps to fully automated systems that monitor, meter and distribute lubricant to hundreds of points simultaneously, depending on temperature, speed and load. It is the difference between greasing "about once a month when we remember" and having a precise, electronically controlled schedule that maximises equipment life and minimises lubricant consumption.

SKF Lincoln systems are fitted on production lines where manual lubrication was impossible (hot, high or hazardous areas), with the aim of reducing bearing failures and grease consumption thanks to precise metering, and of improving uptime. SKF progressive systems distribute exact amounts of lubricant to each point in sequential order, with visual and electrical feedback that each cycle has been completed correctly. SKF electronic controllers can monitor pressure, the number of cycles and the state of the system; the exact functions are confirmed per model.

SKF also offers manual lubrication tools, pre-filled cartridges, greases and oils (for example LGMT, LGHP, LGWA).

What do we supply from the SKF Lubrication range?

ProductDescription
Lincoln Quicklub Progressive SystemsSKF Quicklub progressive systems are the workhorse of heavy industry. The principle is simple but robust: a central pump feeds a progressive divider that splits the lubricant into equal portions to each lubrication point, in sequence. The number of lubrication points depends on the system configuration. The SKF catalogue describes, for example, Quicklub 203 as a progressive system for grease or oil, intended for small, slow-moving chains.
Dual-Line Systems (for example DuoFlex, Helios)For massive applications with hundreds or thousands of lubrication points (for example bucket-wheel excavators, draglines, giant port cranes), dual-line systems are the solution. Two main lines fed alternately with lubricant serve metering injectors at each point; pressure, doses, distances, pumps and controllers depend on the model and are confirmed from the SKF catalogue.
SKF MonoFlex Single-Line SystemsSingle-line systems are the mid-range solution: more sophisticated than progressive (individual metering per point), simpler and more economical than dual-line. A single main line feeds the lubrication points; pressure, doses, pumps and controllers depend on the model and are confirmed from the SKF catalogue. Typical applications: packaging machines, automotive production lines, conveyor and transport systems, large HVAC equipment.
SKF LGMT/LGHP/LGWA LubricantsEven a high-performance lubrication system does not help if the lubricant is mediocre. SKF makes greases and oils specially formulated for bearings in extreme conditions. The SKF range includes multi-purpose greases (LGMT), high-temperature greases (LGHP) and greases for wide temperature ranges (LGWA, LGWM), as well as products for the food industry; the temperature range, base oil, NLGI class and approvals (for example NSF H1) are confirmed from the datasheet of each product. All tested in the SKF ERC (Engineering Research Center) laboratories in the Netherlands. Available in pre-filled 400g cartridges for automatic systems or 180kg drums for filling large reservoirs.

Why SKF Lubrication?

  • Tribology expertise - SKF makes both bearings and lubrication systems, which gives a coherent technical basis for lubrication recommendations
  • Fully integrated systems - from the reservoir to the last lubrication point, all designed to work together
  • Lubrication systems used in industries such as steelworks, mines, cement or paper
  • Controlled metering of the lubricant, which can reduce consumption depending on the application
  • Smart monitoring and alerting - integration into predictive maintenance systems
  • Technical documentation published by the manufacturer

Which SKF Lubrication codes and series are requested most often?

CodeDescription
MonoFlexSingle-line lubrication system, for slewing bearings and rollers
Centro-MaticSingle-line system, with individually adjustable requirement at each point
ProFlexProgressive system with frequent, metered grease doses
MultiFlexAutomatic progressive lubrication system with multiple lines
QuicklubProgressive system with preset lubrication volumes, for slewing applications
DuoFlexSystem with two main lines fed alternately, for difficult environments
HeliosTwo-line system for many points, over extended distances
Lincoln Lubrication Pinion LP2Lubrication pinion mounted at the slewing ring
SP/GRotary-driven piston pump, fixed internal ratio 33:1
OCL-MChain lubrication system, with piston pump and brushes
RA...UModular radial piston pump, with 1-20 outlets
JMHigh-pressure cam pump, up to 600 bar
PDYY/PDYC/PDYSPumps for cylinder lubrication on two-stroke marine engines
PCModular marine pump with 1-28 outlets and gear reduction
RA 20/45Modular radial piston pump, for NLGI 2 greases
P 205Multi-line pump with up to 5 elements
P 212High-pressure pump with up to 12 elements
P 215High-pressure pump with up to 15 elements
FB-XLVibration-resistant pump, 1-24 outlets, oil and stiff greases
P 230Pump derived from the P 215, with up to 30 elements
LMC 301Expandable modular controller with LCD display for several pumps
EOSSingle-line system for slow chains, 12/24 VDC supply
Quicklub 203Progressive system for grease or oil on small chains
Cobra 1XMetering unit for conveyor chains

Where is SKF Lubrication equipment used?

  • Mining and excavation (large excavators, draglines)
  • Steel industry (rolling mills, blast furnaces, cranes)
  • Cement (mills, rotary kilns, conveyors)
  • Pulp & Paper (paper machines, digesters)
  • Energy (wind turbines, hydropower plants)
  • Automotive (production lines, robots)
  • Food & Beverage (bottling, packaging lines)
  • Maritime (port cranes, derricks)
  • Construction (heavy machinery, tower cranes)
  • Transport (railway wagons, airport conveyors)

How do we supply SKF Lubrication in Romania?

We supply SKF Lincoln lubrication systems and SKF lubricants to order. We work from the manufacturer's technical documentation for catalogues and datasheets. Delivery in 24–72 h is sometimes possible for common components when the item is in stock, locally or at the supplier, while for the other configurations the lead time is usually 1–4 weeks to order. To prepare an accurate quotation, we need the type of system (progressive, dual-line, single-line), the number of lubrication points and the type of lubricant used. We send you the technical proposal after availability is confirmed at the supplier.

Warranty service for SKF electronic controllers remains with the manufacturer; the stock of each component in the lubrication systems range is checked on each request.

Frequently asked questions about SKF Lubrication

Which SKF/Lincoln lubrication system should I choose for slewing bearings on a crane?

For slewing bearings and rollers exposed to variable loads, the MonoFlex single-line system is the standard economical solution. For more demanding applications, with many lubrication points on a crane, a progressive system such as Quicklub or ProFlex offers more precise doses and better control of each point.

What is the difference between the SKF DuoFlex and Helios systems?

DuoFlex works with two main lines fed alternately with lubricant, and is recommended for difficult conditions, such as offshore applications. Helios is also a two-line system, but is aimed at installations with a very large number of lubrication points spread over long distances, where pressure must be kept constant along a long run.

Do you supply SKF Lincoln lubrication systems in Romania?

Yes, we bring in SKF Lincoln pumps and lubrication systems to order, according to the manufacturer's technical documentation. The lead time to order is usually 1–4 weeks, depending on the component and the pump configuration. We recommend confirming the exact code of the chosen pump or system.

What information do I send for a quotation for an SKF automatic lubrication system?

It helps to specify the number of lubrication points, the distance between them, the type of lubricant used (oil or grease, and the NLGI class if applicable) and whether the application needs a machine-mounted pump or a centralised system. This data guides the choice between the progressive and single-line ranges.

What is the SKF Lincoln P 215 series pump?

It is a high-pressure pump for multi-line systems, with up to 15 pumping elements available in different sizes, supplied with a motor or with a free shaft end. It is used on machines with high lubricant consumption, where a single central station must serve many points simultaneously.

How do I request a SKF Lubrication quotation?

Send the SKF Lubrication code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SKF, SKF Group, Wikipedia (manufacturer documentation)