Temporiti supplier in Romania
For Temporiti we quote electromagnetic safety brakes for alternating current (T and AC series) and direct current (K, SMB, P, SH), S, R, P and APB rectifiers and PMWM sensors; the item is identified by series, static torque and coil voltage.
Founded in 1965 · Headquarters: Mesero, Italy
Who is Temporiti and what does it make?
Temporiti S.r.l. is a company based in Mesero, active since 1965 in electromagnetic brakes and power transmission equipment. The range has three families: electromagnetic safety brakes for alternating and direct current, rectifiers for powering the direct current brakes, and sensors that monitor the condition and wear of the brake.
The safety brakes are mounted on motors. The K series is the spring-applied direct current brake, for stopping the rotation of a shaft; the motor or fan housing, in cast iron or steel, serves as the braking surface. The K range goes from the K01 model, with a static torque of 4.5 Nm, to the K12/D, with 4,500 Nm. The T series is the classic alternating current version, from T060 to T200/D, and the P series appeared as a parking brake and can brake dynamically below a permitted speed limit. The SMB series is designed for servomotors and is mounted inside the motor housing, without separate ventilation, at a noise level below 70 dBA.
Operation in insulation class F and duty class S1 is ensured only with Temporiti rectifiers, at rated voltage within the coil tolerance. For a quotation, what matters is the series, the static torque, the voltage and the type of current, the maximum motor speed and the shaft diameter.
What do we supply from the Temporiti range?
| Product | Description |
|---|---|
| K, K-Cover, K-FSR, K-F, KTH spring-applied direct current brakes | Electromechanical spring-applied brakes, for stopping the rotation of a shaft. Coil cast in epoxy resin, zinc-plated mechanical parts, optional manual release lever. The K series has 18 codes, from K01 to K12/D, at maximum speeds of 3,600, 1,800 or 1,000 rpm. |
| T and AC alternating current brakes | The T series comprises traditional alternating current brakes, with a robust structure and negligible response times. The codes range from T060, with 4 Nm, to T200/D, with 600 Nm. The electromagnet is cast in epoxy resin, and the mechanical parts are painted. |
| SMB brakes for servomotors | Direct current brake for servomotors, supplied pre-assembled and designed for static, holding operation, with intervention in emergency phases. Codes from SMB040, with 0.35 Nm, to SMB180, with 72 Nm; the maximum motor speed is 6,000 rpm, and 5,000 rpm for the SMB180. |
| S, R, P, APB rectifiers and P, SH, LIFT brakes | The S rectifiers are half-wave, the R are fast, the P have fast excitation, and the APB are half-wave with fast excitation, for 100–500 V AC. The P brake appeared as a parking brake, and the SH has codes from SH071 to SH160. |
Why Temporiti?
- Spring-applied safety brakes for alternating and direct current — the same brand covers mains-powered motors and servomotors, and spare parts are identified by series
- SMB series for servomotors — mounted in the motor housing, without separate ventilation, for robots and small axes
- Static torque from 4.5 Nm to 4,500 Nm in the K series — a wide range for machines with very different loads
- S, R, P and APB rectifiers, with a 100–500 V AC input on the APB — the brake and its supply are chosen together
- PMWM sensors for brake condition and wear — they allow the brake to be monitored during operation
Which Temporiti codes and series are requested most often?
| Code | Description |
|---|---|
| K01 | Spring-applied direct current brake, K series, with a static torque of 4.5 Nm |
| K08 | Spring-applied direct current brake, K series, for speeds up to 1,800 rpm |
| K12/D | K series brake with a static torque of 4,500 Nm, at the upper end of the range |
| T060 | Alternating current brake, T series, with a static torque of 4 Nm |
| T100 | Alternating current brake, T series, with a static torque of 48 Nm |
| T200/D | Alternating current brake, T series, with a static torque of 600 Nm |
| SMB040 | Brake for servomotors, with a static torque of 0.35 Nm |
| SMB180 | Brake for servomotors, with a static torque of 72 Nm |
| SH071 | Direct current brake from the SH series |
| LIFT | Series of brakes for elevators |
| APB | Half-wave rectifier with fast excitation, for 100–500 V AC |
| PMWM | Series of sensors for brake condition and wear |
Where is Temporiti equipment used?
- Elevators — brakes from the LIFT series
- Industry, alternating current — asynchronous motors with T or AC series brake
- Industry, direct current — drives with K, P and SH brakes and dedicated rectifiers
- Robotics — SMB brakes integrated in servomotors
- Marine and stage — brakes for marine and theatre applications
How do we supply Temporiti in Romania?
We can quote Temporiti electromagnetic brakes, rectifiers and brake sensors, including parts for brakes already installed. For an accurate quotation, send the full code from the brake nameplate (for example series and size), the static torque, the coil voltage and the type of current, the motor speed, the shaft diameter and, if present, the type of rectifier. A photo of the nameplate and the motor helps with identification. Brakes are ordered and usually arrive in 1–4 weeks; depending on the series and specification, the lead time may be longer. We confirm the exact date in the quotation.
Compatibility with the existing brake is checked from the nameplate and the mounting dimensions, before we set the code in the quotation.
Frequently asked questions about Temporiti
What brakes does Temporiti make?
Temporiti makes electromagnetic safety brakes for alternating and direct current (series K, K-Cover, T, AC, P, SH, SMB, LIFT), rectifiers for direct current brakes and sensors. The company is based in Mesero, Italy, and has been active since 1965.
How do I choose a brake by torque and current?
We start from the static torque required, the motor speed and the type of supply. The K series covers 4.5 Nm to 4,500 Nm in direct current, and the T series 4 Nm to 600 Nm in alternating current. Send the calculated torque and the available voltage.
Do you supply Temporiti brakes in Romania and how fast?
Temporiti brakes are supplied to order, usually in 1–4 weeks. A brake or rectifier can ship in 24–72 h when the item is in stock, locally or at the supplier. For large series or special specifications the lead time may be longer, and we confirm it in the quotation.
Can I replace an old brake with one from the current series?
Yes, once we check the series on the nameplate, the shaft diameter, the mounting dimensions, the coil voltage and the static torque. On that basis we determine, before the quotation, which brake in the current range fits. Send the brake nameplate and, if possible, a photo of the motor-brake assembly.
What data do I send for a quotation on an APB rectifier or an SMB040 brake?
For a brake: series, size, torque, voltage and type of current. For a rectifier: input voltage (100–500 V AC on the APB), coil voltage and whether fast excitation is needed. For an SMB brake, also state the motor it is mounted on.
How do I request a Temporiti quotation?
Send the Temporiti code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Temporiti S.r.l. (manufacturer documentation)

