Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

UNI-Geräte supplier in Romania

For UNI-Geräte we quote solenoid and electropneumatic safety shut-off valves from the EVA, EVSA, EVO, EPVA and EPVO series, VX and PX double valves and MRK MA, MRS and MEA flow control valves; we need the series and the DN.

Founded in 1945 · Headquarters: Weeze, Germany

Request a quote

Who is UNI-Geräte and what does it make?

UNI-Geräte makes solenoid and electropneumatic safety shut-off valves for fuel gases, air and liquids, at Weeze, in Germany. The company was founded in 1945, and has been based at Weeze since 1958. The gas valves are certified according to Regulation (EU) 2016/426 for gas families 1–3, and those for liquids and steam, as safety fittings, according to Directive 2014/68/EU.

The EVA series comprises normally closed class A valves according to EN 161, with a flange between DN 15 and DN 200 or threaded from G 1/4 to G 2, for low pressures. The EVSA series has pressures of 4 or 10 bar, in DN 15–150 with a flange and G 1/4–G 2 with a thread, according to EN 161 or EN 16678. EVO and EVSO are normally open valves, up to 40 bar. With pneumatic actuation, EPVA covers DN 15–400 up to 10 bar, and AEPV/EPVA reaches 40 bar in DN 15–100. VX and PX are double safety shut-off valves, with DN from 50 or 65 up to 150.

For flow control there are the MRK MA control flaps, DN 15–400, with temperatures of up to 550 °C depending on the version, MRS, with a control ratio of up to 20:1 and 10 bar, and the MEA control valves for air, fuel gases and liquids. For liquids and steam there are the EVS…Ü, EV…Ü and EPV…Ü series, in DN 15–150. Applications are found in industrial burners, in power generation, on board ships and in heat treatment installations.

What do we supply from the UNI-Geräte range?

ProductDescription
EVA and EVSANormally closed solenoid valves for fuel gases. EVA is class A according to EN 161, DN 15–200 with a flange, at low pressures. EVSA is in DN 15–150 or G 1/4–G 2, with pressures of 4 or 10 bar, according to EN 161 or EN 16678.
EVO, EVSO, EPVA, EPVOEVO and EVSO are normally open solenoid valves, up to 40 bar. EPVA is electropneumatic normally closed, DN 15–400, and EPVO is normally open, from G 3/4 to DN 65, depending on the version up to 40 bar.
VX and PXDouble safety shut-off valves, in one body. VX has solenoid actuation, in DN 65, 80, 100 and 150, with 0.5 or 5 bar. PX has electropneumatic actuation, in DN 50–150, up to 16 bar, in class A according to EN 16678.
MRK MA, MRS and MEAMRK MA flow control flaps, DN 15–400, for natural gas and air, with temperatures up to 550 °C, and MRS, DN 15–200, with a control ratio of up to 20:1. MEA is a control valve in DN 15–80 with a flange or G 1/4–G 2, up to 10 bar.

Why UNI-Geräte?

  • Safety shut-off valves for gas, in class A according to EN 161 — for the gas lines of burners
  • EVSA series up to 10 bar, in DN 15–150 and G 1/4–G 2 thread — the same family covers small and large pipes
  • Normally open EVO and EVSO versions up to 40 bar — for installations where the circuit must stay open on loss of voltage
  • EPVA electropneumatic actuation up to DN 400 — large diameters without an oversized solenoid
  • MRK MA and MRS control flaps, the latter with a control ratio of up to 20:1 — combustion is finely adjusted according to load

Which UNI-Geräte codes and series are requested most often?

CodeDescription
EVANormally closed solenoid valve, class A EN 161, DN 15–200 or G 1/4–G 2
EVSASolenoid safety valve, 4 or 10 bar, DN 15–150 or G 1/4–G 2
EVONormally open solenoid valve, up to 40 bar
EVSONormally open solenoid valve, up to 40 bar
VXDouble safety shut-off valve, DN 65–150
EPVAElectropneumatic normally closed valve, DN 15–400
AEPV/EPVAElectropneumatic valve, DN 15–100, up to 40 bar
EPVOElectropneumatic normally open valve, G 3/4 or DN 15–65
PXElectropneumatic double valve, DN 50–150, up to 16 bar
MRK MAFlow control flap, DN 15–400
MRSControl flap, DN 15–200, control ratio up to 20:1
MEAControl valve, G 1/4–G 2 or DN 15–80

Where is UNI-Geräte equipment used?

  • Industrial burners — safety shut-off valves for the gas line
  • Power generation — gas valves in turbines and power plants
  • Marine — safety shut-offs for gas on board
  • Heat treatment installations — control of gas and air flow
  • Steam and technical liquids — EVS…Ü and EV…Ü solenoid valves

How do we supply UNI-Geräte in Romania?

We can quote the safety valves from the EVA, EVSA, EVO, EPVA and EPVO series, the VX and PX double valves and the MRK MA and MRS control flaps. For a correct quotation we need the complete code from the valve, for example the series, the DN or the thread, the maximum pressure, the medium, the coil voltage and whether it is normally closed or normally open. If you are replacing an existing valve, send a photo of the plate. Gas valves are supplied to order, and we confirm the lead time for the requested series in the quotation.

For gas valves we check the gas family, the pressure and the standard required before the quotation, because these data decide the suitable series.

Frequently asked questions about UNI-Geräte

How do the EVO, EPVA, VX and MRS series differ at UNI-Geräte?

UNI-Geräte has made solenoid and electropneumatic safety shut-off valves for fuel gases, air and liquids since 1945, plus flow control valves. The factory is at Weeze, in Germany, and the gas valve lines are certified according to Regulation (EU) 2016/426. EVO is a normally open solenoid valve, up to 40 bar, EPVA an electropneumatic normally closed one, VX a double safety shut-off valve, and MRS a control flap.

How do I choose between EVA and EVSA?

EVA is for low pressures, 0.2–0.5 bar on the flange and 0.3–1 bar on the thread, in class A according to EN 161. EVSA is for 4 or 10 bar, according to EN 161 or EN 16678. Send the working pressure, the DN or the thread and the gas family.

Do you supply UNI-Geräte valves in Romania and how fast?

UNI-Geräte gas valves are brought to order, generally in 1–4 weeks. They can ship in 24–72 h when the item is in stock, locally or at the supplier. Unusual combinations of DN, pressure and coil may need more time, and the date is confirmed in the quotation.

Can I replace an EVSA type solenoid valve?

Yes, after checking the complete code: the series, the DN or the thread, the pressure of 4 or 10 bar, the EN 161 or EN 16678 standard and the coil voltage. A photo of the plate or the data sheet helps us confirm the version in the quotation.

What data do you need for a VX or PX double valve?

We need the series you want, the medium and the gas family, for example natural gas, the maximum pressure, the DN or the thread, the type, normally closed or normally open, and the voltage. For double valves add the type of burner. A photo of the current valve speeds up identification. VX is a double safety shut-off valve, DN 65–150, and PX an electropneumatic double valve, DN 50–150.

How do I request a UNI-Geräte quotation?

Send the UNI-Geräte code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: UNI-GERÄTE E. Mangelmann Elektrotechnische Fabrik GmbH (manufacturer documentation)