UniTek Industrie Elektronik supplier in Romania
For UniTek we quote thyristor controllers from the Classic series, DS-412, DS-420 and DPC-460 digital controllers and BAMOBIL and BAMOCAR controllers; for a quotation we need the motor data, the mains voltage and the number of quadrants.
Headquarters: Leutenbach-Nellmersbach, Germany
Who is UniTek Industrie Elektronik and what does it make?
UniTek Industrie Elektronik is a German manufacturer of power electronics for electric drives, based in Leutenbach-Nellmersbach. For over 30 years it has made thyristor converters for DC motors and servo controllers with transistors. The programme covers outputs from 200 W to 800 kW: analogue thyristor converters, digital controllers for DC and AC motors, plus controllers for battery-powered vehicles in the BAMOBIL and BAMOCAR series.
The Classic series of thyristor converters, also called current controllers, runs from 0.5 kW to 360 kW, optionally up to 800 kW, in one-quadrant or four-quadrant versions. Setting is done with switches and potentiometers, without a computer, and the units are designed as a replacement for older analogue controllers. The digital controllers, for example the DPC-460 with 40 or 60 A effective, work with asynchronous AC, BLDC (brushless), DC, IPM (interior magnet) and permanent magnet synchronous motors, communicate through RS232 or CANopen and have a switching frequency adjustable from software at 4, 8, 12 or 16 kHz.
For a maintenance department, the value of the range lies in upgrades without changing the motor: a machine tool or special machine whose control electronics are out of production receives a controller that uses the existing motors. Usual applications are automated production lines, conveyors and internal logistics, special machines, automatically guided vehicles and installations where a DC motor must be kept in operation.
What do we supply from the UniTek Industrie Elektronik range?
| Product | Description |
|---|---|
| Thyristor Converters (Classic Series) | Current controllers for DC motors, from 0.5 kW to 360 kW (optionally 800 kW), with one quadrant or four quadrants. They are set with switches and potentiometers and replace existing analogue controllers, with no programming knowledge needed. |
| DS-412, DS-420, DS-403, DPC-460 Digital Controllers | Programmable controllers for position, speed and torque control, with several fieldbuses and with interfaces for sensors. The DPC-460 is supplied in 40 and 60 A effective versions, with RS232 and CAN/CANopen. |
| Battery Controllers: BAMOBIL and BAMOCAR | Digital controllers for battery-powered drives, between 2 and 450 kW, for mobile and stationary applications. They have IP65 protection, optionally IP69k, and a standardised control board common to all versions. |
| Analogue Controllers for DC and AC Motors | Simple units, set with potentiometers, suited to replacing an existing controller or to special applications without complex monitoring. They are used in retrofits of machines whose original electronics are out of production. |
Why UniTek Industrie Elektronik?
- The Classic series from 0.5 to 360 kW — optionally up to 800 kW, with versions for one or four quadrants
- Setting without a computer — switches and potentiometers on the analogue controllers, for quick replacements
- Digital controllers for several motor types — the DPC-460 accepts asynchronous, BLDC, DC, IPM and PMSM motors
- Controllers for battery-powered vehicles — BAMOBIL and BAMOCAR, between 2 and 450 kW, with IP65 protection (optionally IP69k)
- Hardware and software adapted on request — for upgrades, when the original controller is no longer made
Which UniTek Industrie Elektronik codes and series are requested most often?
| Code | Description |
|---|---|
| Classic | Thyristor converters, 0.5–360 kW, 1 or 4 quadrants |
| DS-403 | Digital motor controller |
| DS-412 | Digital motor controller |
| DS-420 | Digital motor controller |
| DPC-460 | Three-phase digital controller, 40 or 60 A effective, RS232 and CANopen |
| DS-4820 | Digital controller for battery drives |
| BAMOBIL-D3.3 | Digital battery controller, IP20 |
| BAMOBIL-D3-I | Digital battery controller, IP20, galvanically isolated |
| BAMOBIL-D3-IM | Digital battery controller, IP65, galvanically isolated |
| BAMOBIL-A2 | Analogue battery controller, IP20 |
| BAMOCAR-PG-D3-700-160 | Digital battery controller, IP65, supply up to 700 V |
| BAMOCAR-PG-D3-700-400 | Digital battery controller, IP65, supply up to 700 V |
| BAMOCAR-PG-D3-700-900 | Digital battery controller, IP65, supply up to 700 V |
Where is UniTek Industrie Elektronik equipment used?
- Automated production lines — controllers for axes and conveyors with DC motors
- Logistics and internal transport — drives for conveyors and automatically guided vehicles
- Special machines and machine building — hardware and software adapted controllers
- Upgrading older machines — replacing control electronics that are out of production
How do we supply UniTek Industrie Elektronik in Romania?
We can quote UniTek controllers for DC motors and for upgrading existing drives, starting from the model or from the motor data. Common controllers can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise we supply them to order, usually in 1–4 weeks. For adapted or high-power versions, depending on the specification, the lead time may be longer, confirmed in the quotation. For a correct request we need the data from the motor nameplate (armature and field voltage, rated current, power), the mains voltage, the number of quadrants, the reference signal and, for a controller to be replaced, the code on the unit.
Compatibility with an older controller is established from the code of the unit and the motor data, not only from the name of the machine.
Frequently asked questions about UniTek Industrie Elektronik
What does UniTek Industrie Elektronik make?
UniTek makes power electronics for electric drives in Germany: thyristor converters for DC motors, analogue controllers, programmable digital controllers for DC and AC motors and controllers for battery-powered vehicles. Power ranges from 200 W to 800 kW, and the hardware and software can be adapted to the request.
How do I choose a thyristor converter for a DC motor?
Start from the rated power and current of the motor, the mains voltage and the number of quadrants: one, if the motor runs in one direction only and does not brake regeneratively; four, if it needs reversing and braking with energy recovery. The Classic series covers between 0.5 and 360 kW; the data on the motor nameplate is enough for a first proposal.
Do you supply UniTek in Romania, and how quickly?
Yes, to order. A standard UniTek controller: 24–72 h when the item is in stock, locally or at the supplier; otherwise, supplied to order, usually in 1–4 weeks. For controllers adapted on request, high-power ones and battery versions, depending on the specification, the lead time may be longer; we confirm it in the quotation.
Can I replace an old analogue controller that is out of production?
Often yes, but a replacement is proposed only after checking. To propose a replacement we need the code on the old unit, the motor data, the reference and feedback signals used (for example a tacho-generator), the supply voltage and whether the machine needs reversing. With these we establish whether an analogue or a digital controller fits.
What should I send for a UniTek controller quotation?
The motor nameplate (power, armature voltage, current, field voltage), the mains voltage and frequency, the number of quadrants, the type of feedback (tacho-generator, encoder or none), the control signal and the place of installation. For a battery drive, also add the battery voltage, the power required and the protection rating wanted.
How do I request a UniTek Industrie Elektronik quotation?
Send the UniTek Industrie Elektronik code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: UniTek Industrie Elektronik GmbH (manufacturer documentation)

