Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Winsmith supplier in Romania

Winsmith makes right-angle, helical and planetary gear reducers for heavy industrial applications

Headquarters: Springville, New York, USA

Request a quote

Who is Winsmith and what does it make?

Winsmith is an American manufacturer of speed reducers, with plants in Springville (New York), Flowery Branch (Georgia) and Asheville (North Carolina). The range covers right-angle worm gear reducers (RD Series), compact cast aluminium versions (ALRN round, ALSQ square), in-line helical and bevel-helical gear reducers (HXI, HXB) and planetary gear reducers (021HM). Winsmith gear reducers are interchangeable with other established makes, according to the manufacturer's interchangeability guides.

The RD series offers gear ratios between 5:1 and 100:1, with centre distances of 1.33 to 3.00 inches and output torque of up to 4,573 lbf-in, at an efficiency of up to 97%. The HXI in-line helical series, in six sizes from 412A to 613A, covers ratios of 3.52 to 480 in a two- or three-stage configuration, with input power between 1/4 and 5 HP and output torque between 1,550 and 4,550 lbf-in. The 021HM planetary gear reducers reach reduction ratios of up to 50,000:1, for applications with extreme reduction requirements in a compact footprint.

For retrofits in the mining, chemical or food industry in Romania, where an existing gear reducer has to be replaced without changing the mounting base, the Winsmith interchangeability guides reduce the time needed to select the correct part.

What do we supply from the Winsmith range?

ProductDescription
RD Series Right-Angle Gear ReducersWorm gear reducers, with gear ratios from 5:1 to 100:1, centre distances of 1.33 to 3.00 inches, input power from 0.11 to 10.87 HP and output torque of up to 4,573 lbf-in, at an efficiency of up to 97%. Designed for retrofits and new installations in heavy industry, with dimensional compatibility with right-angle gear reducers from other manufacturers.
HXI In-Line Helical Gear ReducersSix housing sizes, from 412A to 613A, with ratios of 3.52-61.89 in a two-stage configuration and 38.4-480.16 in three stages. Input power ranges from 1/4 to 5 HP, and output torque reaches 4,550 lbf-in. Compact in-line construction, suited to drives where the input and output shafts must remain collinear.
Round and Square Aluminium Gear Reducers ALRN/ALSQCompact versions with a cast aluminium housing, in five round sizes (030 to 085) and three square sizes (45, 50, 63). Ratios range from 5:1 to 102:1 for the ALRN and 7:1 to 102:1 for the ALSQ, with output torque of up to 2,921 lbf-in for the ALRN and 1,416 lbf-in for the ALSQ, for applications where low weight matters.
021HM Planetary Gear ReducersPlanetary gear reducers with reduction ratios between 1.1:1 and 50,000:1 and output torque between 69 and 113,000 lbf-in, for applications that call for extreme reduction in a compact footprint, such as precision positioning equipment or drives with limited space.

Why Winsmith?

  • Interchangeability guides for other makes of gear reducers
  • Range of technologies — right-angle worm, in-line helical, bevel-helical and planetary
  • Reduction ratios of up to 50,000:1 on the 021HM planetary series
  • Efficiency of up to 97% on the RD series right-angle gear reducers
  • Cast aluminium versions (ALRN, ALSQ) for installations where weight matters

Which Winsmith codes and series are requested most often?

CodeDescription
ALRN 030round aluminium right-angle gear reducer, size 030
ALRN 045round aluminium right-angle gear reducer, size 045
ALRN 050round aluminium right-angle gear reducer, size 050
ALRN 063round aluminium right-angle gear reducer, mid size in the series
ALRN 085aluminium right-angle gear reducer, largest size in the series
ALSQ 45square right-angle gear reducer, ratio 7:1-102:1
ALSQ 50square right-angle gear reducer, size 50
ALSQ 63square right-angle gear reducer, input power up to 2 HP
HXI 412Ain-line helical gear reducer, size 412A
HXI 512Ain-line helical gear reducer, size 512A
HXI 612Ain-line helical gear reducer, size 612A
HXBbevel-helical gear reducer for angle-mounted drives
021HMplanetary gear reducer, ratio 1.1:1 to 50,000:1
SE Encoreright-angle gear reducer in the manufacturer's updated range
Stainless Gearmotorgear motor with stainless steel housing for hygienic environments

Where is Winsmith equipment used?

  • Mining — RD right-angle gear reducers for heavy conveyor belts
  • Chemicals and petrochemicals — helical gear reducers for agitators and pumps
  • Food industry — aluminium gear reducers for processing lines
  • Materials handling — planetary gear reducers for precision positioning

How do we supply Winsmith in Romania?

For Winsmith, availability and lead time are confirmed in the quotation; we rely on the manufacturer's technical documentation, including the interchangeability guides. We supply the RD, ALRN, ALSQ, HXI, HXB and planetary gear reducers to order, usually in 1–4 weeks, depending on the manufacturer's confirmation and on transport. For a quotation we need the housing size, the gear ratio wanted and, if you are replacing an existing gear reducer of another make, the old model — we check the equivalent in the Winsmith interchangeability guides before confirming the quotation.

Winsmith products are supplied to order, on the basis of the manufacturer's documentation, which lists the three plants in the USA.

Frequently asked questions about Winsmith

What products does Winsmith make?

Winsmith makes industrial speed reducers — right-angle worm (RD), cast aluminium (ALRN, ALSQ), in-line helical and bevel-helical (HXI, HXB) and planetary (021HM). It publishes interchangeability guides with other makes.

How do I choose the right Winsmith gear reducer by code?

Start from the technology you need — right-angle worm for RD, helical for HXI, planetary for an extreme reduction ratio — then check the housing size and the gear ratio needed for the torque the application requires. If you are replacing an existing gear reducer, the manufacturer's interchangeability guide gives you the equivalent Winsmith model directly.

How do I choose a Winsmith gear reducer to replace an existing one?

The mounting dimensions and the gear ratio of the existing gear reducer point to the corresponding Winsmith model. For exact identification, we need the full code from the nameplate of the old gear reducer.

Can Winsmith be supplied in Romania or Europe?

Yes. The Winsmith documentation lists the three plants in the USA. We supply the gear reducers to order, usually in 1–4 weeks, depending on the manufacturer's confirmation.

What data do you need for a quotation on Winsmith gear reducers?

The housing size or the full model (for example HXI 512A), the gear ratio and the torque needed for the application. If a gear reducer of another make is being replaced, send the existing model — we check the Winsmith equivalent in the interchangeability guide before the quotation.

How do I request a Winsmith quotation?

Send the Winsmith code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Winsmith (manufacturer documentation)