Aerzen supplier in Romania
For Aerzen we quote Delta Blower Roots blowers, Delta Hybrid hybrid blowers (for example D12S and D24H) and Delta Turbo turbo blowers; from the code on the nameplate we identify the generation of the model.
Founded in 1864 · Headquarters: Aerzen, Germany
Who is Aerzen and what does it make?
Aerzener Maschinenfabrik, known simply as Aerzen, is a German manufacturer of Roots blowers, screw compressors and turbo blowers, active since 1864 in the town of Aerzen in Germany. In recent decades the company has also extended its range to screw compressors and high-efficiency turbo blowers.
The Delta Blower range covers classic three-lobe Roots blowers, used for biological aeration in wastewater treatment plants and for pneumatic conveying of granular materials, with differential pressure of up to 1,000 mbar. Delta Hybrid combines the rotor profile of a Roots blower with an internal compression ratio typical of screw compressors, achieving significantly better energy efficiency at the same pressure, which lowers electricity bills over the long term. Delta Screw is the range of true screw compressors, for higher pressures, and Delta Turbo covers high-capacity turbo blowers, with air bearings, oil-free, for large treatment plants and large-scale industrial applications.
This range — from the simple and robust Roots blower to the high-efficiency turbo blower with air bearings — allows the optimum technology to be chosen for each application, instead of forcing a single solution on all use cases. Materials and versions cover standard cast iron and steel variants, as well as options for special media or explosion-risk zones. Aerzen equipment is found in wastewater treatment plants, the cement industry, pneumatic conveying, the petrochemical industry and industrial applications where process air or gas must be compressed reliably, non-stop, for years.
What do we supply from the Aerzen range?
| Product | Description |
|---|---|
| Delta Blower Roots Blowers | Delta Blower is the classic Aerzen range of Roots blowers, with three rotating lobes with no contact between them, used for over a century for biological aeration of tanks in treatment plants and for pneumatic conveying of granular materials in industry. The differential pressure covers from -500 to 1,000 mbar, with flow rates from 30 to 15,000 m³/h, matched to the size of the tank or installation served. The robust construction, with few wear components, ensures reliable operation over long periods with minimal maintenance — periodic checking of the drive belts, the bearings and the oil in the housing. It is a solution with a favourable balance of cost and reliability for applications where maximum energy efficiency is not the deciding criterion. |
| Delta Hybrid Hybrid Blowers | Delta Hybrid combines the rotor profile of a Roots blower with a degree of internal precompression of the air before discharge, similar to the principle used by screw compressors, which significantly reduces energy consumption compared with a classic Roots blower at the same working pressure. The efficiency difference translates directly into savings on the electricity bill, relevant especially for large treatment plants, where aeration blowers run non-stop and account for a significant part of the installation's total energy consumption. It nevertheless keeps the mechanical simplicity and reliability of the Roots blower, without the added complexity of a full screw compressor. |
| Delta Screw Screw Compressors | The Delta Screw range covers true screw compressors, for applications that need higher pressures than a Roots or hybrid blower can provide, with high energy efficiency thanks to internal compression controlled by the profile of the meshing helical rotors. They are used for long-distance pneumatic conveying, aeration at great tank depths or other industrial applications with high pressure requirements and constant flow. Available with oil-injected cooling or in an oil-free design, depending on the compressed air purity requirements of the application. |
| Delta Turbo Turbo Blowers | Delta Turbo is the Aerzen range of high-capacity turbo blowers, with the rotor supported on air bearings, with no lubricating oil, which gives high energy efficiency. It is intended for large treatment plants and industrial applications where large air flows must be delivered with low energy consumption per cubic metre. The control electronics adjust the speed according to the real air demand of the process, automatically optimizing the operating point for high efficiency. |
Why Aerzen?
- Over 160 years of activity in blower and compressor manufacturing
- A complete technology range — Delta Blower, Delta Hybrid, Delta Screw and Delta Turbo, for any pressure and efficiency requirement
- Superior energy efficiency — Delta Hybrid and Delta Turbo significantly reduce consumption compared with a classic Roots blower at the same pressure
- Proven reliability in continuous operation — equipment designed for non-stop duty in treatment plants and heavy industry
- Air bearings on the Turbo range — oil-free operation, with contact-free bearings
- Technical support in choosing the right technology — Roots, hybrid, screw or turbo, according to the real load profile of the application
Which Aerzen codes and series are requested most often?
| Code | Description |
|---|---|
| D12H | Delta Hybrid blower, high pressure, 670 m³/h at 1500 mbar |
| D12S | Delta Hybrid blower, standard, 690 m³/h at 1000 mbar |
| D13S | Delta Hybrid blower, new generation, 775 m³/h at 1000 mbar |
| D17S | Delta Hybrid blower, new generation, 1010 m³/h at 1000 mbar |
| D24H | Delta Hybrid blower, high pressure, 1370 m³/h at 1500 mbar |
| D24S | Delta Hybrid blower, standard, 1390 m³/h at 1000 mbar |
| D25S | Delta Hybrid blower, new generation, 1440 m³/h at 1000 mbar |
| D30S | Delta Hybrid blower, new generation, 1780 m³/h at 1000 mbar |
| D36H | Delta Hybrid blower, high pressure, 1900 m³/h at 1500 mbar |
| D36S | Delta Hybrid blower, standard, 2150 m³/h at 1000 mbar |
| D52S | Delta Hybrid blower, standard, 3120 m³/h at 1000 mbar |
| D62H | Delta Hybrid blower, high pressure, 3400 m³/h at 1500 mbar |
| D62S | Delta Hybrid blower, standard, 3500 m³/h at 1000 mbar |
| D76H | Delta Hybrid blower, high pressure, 4440 m³/h at 1500 mbar |
| D76S | Delta Hybrid blower, standard, 4550 m³/h at 1000 mbar |
| D98H | Delta Hybrid blower, high pressure, 5600 m³/h at 1500 mbar |
| D98S | Delta Hybrid blower, standard, 5800 m³/h at 1000 mbar |
| D152H | Delta Hybrid blower, high pressure, 8700 m³/h at 1500 mbar |
| D152S | Delta Hybrid blower, standard, 8900 m³/h at 1000 mbar |
Where is Aerzen equipment used?
- Wastewater treatment — biological aeration of tanks in large municipal and industrial plants
- Cement and building materials industry — pneumatic conveying of powders
- Petrochemical industry — compressors for process gases and special applications
- Pneumatic conveying — transport of granular materials over long distances
- Food industry — applications with clean-air, oil-free requirements
- Energy and biogas — compressors for biogas production and treatment installations
How do we supply Aerzen in Romania?
We support industrial projects in Romania with Aerzen blowers and compressors — Delta Blower Roots blowers, Delta Hybrid hybrid variants, Delta Screw screw compressors and Delta Turbo turbo blowers — ordered through EU supply channels. We confirm availability in the quotation and choose the suitable solution starting from the manufacturer's technical documentation. For a correct recommendation, send us the pressure, the air flow required and the load profile of the application. Wear parts and maintenance components for common models can usually ship in 24–72 h when the item is in stock, locally or at the supplier, while complete equipment or special configurations usually take 1–4 weeks to order.
Configuration of the control electronics of Delta Turbo blowers is carried out by Aerzen technicians.
Frequently asked questions about Aerzen
Which Aerzener Delta Hybrid blower do I choose for a flow rate of about 3500 m³/h?
The D62S model from the Aerzener Delta Hybrid range covers a flow rate of about 3500 m³/h at a working pressure of 1000 mbar, and is suitable for standard aeration or pneumatic conveying applications. If a higher pressure is needed, up to 1500 mbar, at a similar flow rate, the D62H version is the appropriate choice.
What is the difference between Aerzener Delta Hybrid blowers ending in H and those ending in S?
The S suffix indicates the standard version, which operates at a discharge pressure of up to 1000 mbar, covering most ordinary industrial applications. The H suffix marks the high-pressure version, able to work up to 1500 mbar, recommended for processes that need higher pressure, such as long-distance pneumatic conveying.
Do you supply Aerzener blowers in Romania?
Yes, Aerzener blowers from the Delta Hybrid range are brought in to order, following the manufacturer's technical documentation; availability is checked on each request. It usually takes 1–4 weeks to order, depending on the size of the blower and the drive configuration chosen. We recommend confirming the exact model before ordering.
What information do I send for a quotation on an Aerzener Delta Hybrid blower?
It is useful to state the air flow required, the working pressure wanted and the altitude or temperature of the installation environment. These details allow the correct size to be chosen, from the compact D12 model to the large D152 model, in the standard S or high-pressure H version.
How do I request a Aerzen quotation?
Send the Aerzen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Aerzener Maschinenfabrik (Aerzen), Aerzener Maschinenfabrik GmbH (manufacturer documentation)

