Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Corken supplier in Romania

Pumps and compressors for LPG and liquefied gas transfer

Founded in 1924 · Headquarters: Oklahoma City, Oklahoma, USA

Request a quote

Who is Corken and what does it make?

Corken is an American manufacturer of pumps and compressors for liquefied petroleum gases, established in 1924 in Oklahoma City. The range covers Coro-Vane sliding vane pumps, Cor-Flo turbine pumps for propane, butane and agricultural ammonia, Propane Miser rail tank car unloading systems and vertical or horizontal compressors for LPG. For the Romanian market we can quote from the Corken range where the fluid transferred is a liquefied gas under pressure, not an ordinary liquid.

The difference from a classic centrifugal pump comes from the construction specific to liquefied gases — the Cor-Flo turbine pumps maintain the differential pressure needed to avoid vaporisation (flashing) during transfer, with flows up to approximately 50 gpm and differential pressures up to 250 psi on the DL and F families. The DL and F series cover several numbered sizes, mounted either directly on an electric motor (DL) or on a frame with a coupling (F), and the HDP variants are designed for heavier duty.

At LPG stations and bottling plants, Corken means access to equipment dedicated to propane and butane transfer, with UL certification for certain systems and coverage for applications from small cylinders to distribution terminals.

What do we supply from the Corken range?

ProductDescription
Cor-Flo Turbine Pumps, DL and F FamiliesTurbine pumps for liquefied petroleum gases, available in the DL family (direct mounting on an electric motor, C-Face type) and the F family (frame mounting, with coupling), each in several numbered sizes from 10 to 19, plus higher capacity variants 060, 075 and 150. Flow up to approximately 50 gpm (189 l/min) and differential pressure up to 250 psi (17.2 bar). Typical application: transfer of propane or butane from a tanker to a storage tank; the customer must confirm the flow required and the mounting type (on motor or on frame).
Coro-Vane Sliding Vane PumpsSliding vane pumps for liquefied petroleum gases, used where a compact and robust solution is required for moderate flows. Typical application: transfer of propane or agricultural ammonia in medium-sized installations; the customer must provide the working pressure of the installation and the exact type of liquefied gas handled.
Propane Miser Unloading SystemSystem dedicated to unloading rail tank cars with propane or butane, designed to remove the propane remaining in the car, down to 0 psig. It integrates with the turbine or vane pumps from the Corken range in a complete unloading installation. Typical application: LPG distribution terminals with regular unloading of rail tank cars; the customer must state the car capacity and the pressure available at the unloading point.
Vertical and Horizontal Compressors for LPGCompressors dedicated to vapour recovery and complete transfer of liquefied petroleum gases, available in vertical or horizontal design, often used together with Corken pumps in a complete bottling or unloading installation. Typical application: recovery of the vapours remaining in a tank after the liquid has been transferred; the customer must confirm the volume of gas to be recovered and the working pressure of the installation.

Why Corken?

  • Construction specific to liquefied petroleum gases, which avoids vaporisation during transfer
  • DL and F families with several numbered sizes, mounted on a motor or on a frame with a coupling
  • Propane Miser system dedicated to unloading rail tank cars with propane or butane
  • Vertical and horizontal compressors complementary to the pumps, for vapour recovery and complete LPG transfer

Which Corken codes and series are requested most often?

CodeDescription
DL 10motor-mounted turbine pump, small size
DL 12motor-mounted turbine pump
DL 13motor-mounted turbine pump
DL 14motor-mounted turbine pump
DL 16motor-mounted turbine pump, higher flow
DL 17motor-mounted turbine pump
DL 18motor-mounted turbine pump
DL 19motor-mounted turbine pump, largest size in the family
DLD/DLF 060increased-capacity turbine pump
DLD/DLF 075increased-capacity turbine pump
DLD/DLF 150increased-capacity turbine pump, largest size
F 10frame-mounted turbine pump with coupling, small size
F 12frame-mounted turbine pump with coupling
F 13frame-mounted turbine pump with coupling
F 14frame-mounted turbine pump with coupling
F 16frame-mounted turbine pump with coupling, higher flow
F 17frame-mounted turbine pump with coupling
F 18frame-mounted turbine pump with coupling
F 19frame-mounted turbine pump with coupling, largest size
HDP 075/150turbine pump for heavy duty

Where is Corken equipment used?

  • LPG distribution — bottling stations and propane/butane terminals
  • Chemicals — transfer of agricultural ammonia and other liquefied gases
  • Oil and natural gas — vapour recovery and transfer of liquefied products
  • Transport — unloading rail tank cars and road tankers with liquefied gases
  • Aviation — transfer of aviation fuel with Corken industrial pumps

How do we supply Corken in Romania?

We supply Corken pumps and compressors for liquefied petroleum gases based on the information published by the manufacturer, and availability is checked model by model. We bring in the equipment to order through EU supply channels, usually in 1–4 weeks, confirmed after checking availability at the factory. For a quotation we need the type of liquefied gas handled, the flow and the differential pressure required, plus the desired mounting type.

UL certification for each system configuration is determined from the exact specifications sent by the customer.

Frequently asked questions about Corken

What products does Corken make?

Corken produces pumps and compressors for liquefied petroleum gases — propane, butane, agricultural ammonia — with ranges of turbine pumps (DL, F), Coro-Vane vane pumps and systems dedicated to unloading rail tank cars. They are used at bottling stations and LPG distribution terminals.

How do I choose the right size of Corken turbine pump?

You need to know the flow required in gpm, the differential pressure required by the installation and whether you prefer direct motor mounting (DL family) or frame mounting with a coupling (F family). Send us this data, together with the type of liquefied gas, and we check the suitable size in the range.

Can you supply Corken pumps in Romania, and within what lead time?

Yes, we bring in Corken pumps and compressors to order through EU supply channels, usually in 1–4 weeks, confirmed after checking with the factory. This range is not kept on the shelf, so the exact lead time depends on the model chosen and on availability at the manufacturer.

What details should I specify for a Corken pump quotation for LPG?

You need to send us the exact type of liquefied gas handled, the desired flow, the differential pressure of the installation and the preferred mounting type. With this information we identify the suitable model from the DL or F families and confirm the delivery time.

How do I request a Corken quotation?

Send the Corken code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 19 November 2026 · Sources: Corken Inc. (manufacturer documentation)