Elmo Rietschle supplier in Romania
For Elmo Rietschle we quote G-BH1 series side channel blowers, VC rotary vane vacuum pumps, C-VLU claw vacuum pumps and L-BV liquid ring pumps; we identify the series from the nameplate.
Founded in 1903 · Headquarters: Germany (Bad Neustadt an der Saale and Schopfheim)
Who is Elmo Rietschle and what does it make?
Elmo Rietschle is the name that resulted from the union of two German companies with separate traditions in vacuum technology — Elmo and Rietschle — now a single brand. Production takes place in two centres in Germany, at Bad Neustadt an der Saale (specialised in side channel blowers and liquid ring pumps) and at Schopfheim, for installations from food packaging to small-capacity wastewater treatment.
The G-BH1 series side channel blowers are the solution for applications that need moderate vacuum or moderate pressure at relatively high flow rates, without parts in contact or lubricating oil — for example light pneumatic conveying or aeration of small tanks in treatment plants. The G series covers flow rates of up to 3,000 m³/h and differential pressures of up to 1,100 mbar, depending on the model. For deeper vacuum, the range of oil-lubricated rotary vane pumps (VC series) covers the medium vacuum range, and the dry claw pumps (C-VLU and C-VLR series) eliminate oil completely from the compression chamber, suited to applications where oil contamination is not acceptable.
For industry in Romania, the Elmo Rietschle range covers a very practical niche: processes that need constant vacuum or low pressure — vacuum packaging, suction cup lifting, plastic thermoforming, pneumatic conveying of light materials — where an ordinary air compressor would be oversized and energy-inefficient. For certain models there are ATEX versions according to the manufacturer's documentation; we confirm availability by code, from the manufacturer's documentation.
What do we supply from the Elmo Rietschle range?
| Product | Description |
|---|---|
| G-BH1 Series Side Channel Blowers | Side channel blowers with dry, contact-free compression operation, suited to moderate vacuum or moderate overpressure at relatively high flow rates. The G-BH1 series is designed for variable loads, with speed control through a variable frequency drive and a service interval of 20,000 hours; the exact flow rates and pressures are confirmed by model, from the manufacturer's documentation. Oil-free operation in the compression chamber. Used for pneumatic conveying of light materials, aeration of small treatment tanks, vacuum packaging and industrial suction cup lifting. |
| VC Series Rotary Vane Vacuum Pumps | Oil-lubricated vacuum pumps, with sliding vanes in an eccentric rotor, for applications that need a deep and stable vacuum. Flow rates and ultimate vacuum depend on the model chosen and are confirmed from the manufacturer's documentation. Lubrication system with oil recirculation, with integrated filtration to extend change intervals. Suited to plastic thermoforming, vacuum packaging, low-vacuum distillation and laboratory or pilot processes at industrial scale. Low noise and low vibration thanks to the balancing of the rotor. |
| C-VLU and C-VLR Series Dry Claw Pumps | Vacuum pumps and compressors with claw technology with no contact between the rotors, completely oil-free in the compression chamber, eliminating the risk of contamination of the product or of the process atmosphere. Flow rates of up to 600 m³/h, depending on the model. Suited to the food, pharmaceutical or electronics industries, where traces of oil in the process stream would compromise product quality. Simplified maintenance thanks to the absence of lubricating oil in the compression area, with extended service intervals compared with equivalent oil-lubricated pumps. |
| L-BV Series Liquid Ring Vacuum Pumps | Liquid ring vacuum pumps, suited to drawing off vapours and gases with a moisture content or fine particles, where dry pumps would be exposed to wear or contamination. Flow rates vary by model, with a working vacuum in the order of tens of mbar absolute, with a working liquid (usually water) that provides both sealing and cooling during compression. Massive construction, tolerant of fine particles carried in the gas stream. Frequently used in treatment plants for degassing, in the chemical industry for drawing off process vapours and in applications where explosion safety of the gas drawn off is a requirement. |
Why Elmo Rietschle?
- A varied range of vacuum technologies — oil-lubricated vanes, dry claws, liquid ring, screw and side channel
- Oil-free versions available — dry claw pumps for applications where contamination is not acceptable
- Energy efficiency in low-vacuum applications — avoids oversizing with general air compressors
- Dual technical heritage — combines the historical expertise of two German companies specialised in vacuum
- Versions for dusty environments or combustible gases on certain models, confirmed by code
Which Elmo Rietschle codes and series are requested most often?
| Code | Description |
|---|---|
| G-BH1 | Side channel blower, 20,000-hour service interval, variable loads |
| G-BH2 | Side channel blower, wear-free operation, high energy efficiency |
| G-BH7 | Side channel blower, pressure up to 1000 mbar, quiet operation |
| G-BH100 | Blower with DC motor, low maintenance beyond 20,000 hours, variable speed |
| VLU | Claw vacuum pump, oil-free, model family 62 to 1000 |
| VLR | Claw vacuum pump, dry compression, ultimate vacuum up to 150 mbar |
| DLR | Claw compressor, dry operation, model family 100 to 501 |
| KLR 80-140 | Efficient pressure-vacuum unit, low maintenance, integrated air cooling |
| VSI | Screw vacuum pump, oil-free, for industrial applications |
| IDS | Industrial unit with screw technology from the Elmo Rietschle range |
| VTE 3-10 | Vane vacuum pump, dry operation |
| BV2 | Liquid ring vacuum pump for industrial applications |
| F-RB 1175 | High-speed radial blower, oil-free, very quiet |
| VPS | Screw booster system, for medical and industrial applications |
Where is Elmo Rietschle equipment used?
- Packaging and food industry — vacuum for packaging and suction cup lifting
- Plastics industry — thermoforming and vacuum processing
- Printing — paper transport and vacuum holding
- Wastewater treatment — aeration of small tanks, degassing
- Pneumatic conveying — light materials and granulates
- Electronics industry — processes that require oil-free vacuum
- Automotive industry — handling parts with vacuum suction cups
How do we supply Elmo Rietschle in Romania?
For Elmo Rietschle side channel blowers, vane vacuum pumps and dry claw pumps, we start from the manufacturer's technical documentation and confirm case by case, through EU supply channels, before any quotation. For spare vanes, filters and gaskets, the guideline is 24–72 h when the item is in stock, locally or at the supplier; for complete units or versions for explosion-risk areas or oil-free versions, the lead time is usually 1–4 weeks to order. For the correct proposal we need the vacuum level or pressure required, the air flow rate and the cleanliness requirements of the process (with or without traces of oil accepted). A quotation is prepared on the basis of this data.
Availability is checked on each request; warranty work on units already installed is handled by the manufacturer.
Frequently asked questions about Elmo Rietschle
What is the difference between the G-BH1 and the G-BH100 from Elmo Rietschle?
The G-BH1 is a side channel blower designed for variable loads, with a service interval of 20,000 hours, while the G-BH100 uses an efficient DC motor, with variable speed and maintenance-free operation beyond 20,000 hours. Both belong to the Elmo Rietschle family of side channel blowers for vacuum and pressure applications.
Do you supply Elmo Rietschle vacuum pumps to order for customers in Romania?
Yes, we bring in pumps and blowers from the G-BH, VLU, VLR or BV2 ranges to order, on the basis of the model confirmed from the manufacturer's technical documentation. The lead time is usually 1–4 weeks. We recommend sending the code from the equipment nameplate so that the correct version can be identified.
What parameters should be specified for a quotation for an Elmo Rietschle vacuum pump?
The vacuum level or pressure required, the volumetric flow rate wanted and the working medium, dry or with traces of moisture, are needed. For equipment that is already installed, the type number marked on the pump body makes it possible to find the equivalent Elmo Rietschle version, whether claw, screw or liquid ring.
What is the Elmo Rietschle F-RB 1175 blower?
The F-RB 1175 is a high-speed radial blower, oil-free, designed for energy-efficient and extremely quiet operation compared with classic side channel blowers. It is used in applications where the noise level in the production hall has to be limited. We confirm the exact parameters from the official datasheet before recommending an equivalent version.
How do I request a Elmo Rietschle quotation?
Send the Elmo Rietschle code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Elmo Rietschle, Wikipedia (manufacturer documentation)

