Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Allmatic-Jakob supplier in Romania

For Allmatic-Jakob we quote machine vises from the DuoCentric 125, CentroLite, CombiRail and TeleCentric families, clamping towers and the RoboBuddy automation unit; the item is identified by series, jaw width and jaw type.

Founded in 1973 · Headquarters: Unterthingau, Germany

Request a quote

Who is Allmatic-Jakob and what does it make?

Allmatic-Jakob is a German manufacturer of clamping systems for machining on machine tools, based in Unterthingau and active since 1973. The range starts from the machine vise and extends to multiple clamping, 5-axis clamping, clamping towers, clamping force monitoring and the automation of vise opening and closing by a robot. For a milling shop this means fewer manual adjustments and clamping that repeats from one part to the next.

The vises are grouped by working mode: centric, double or multiple clamping, 5-axis clamping, variants for raw parts and for pre-machined parts, hydraulic vises and the AllLite line, with CentroLite, CombiRail and BaseLite. DuoCentric 125 combines centric and double clamping: the clamping force is 40 kN at a torque of 60 Nm, the jaw width is 125 mm, and the clamping range for a single part runs from 37 to 318 mm. The Ø 25H6 M10 holes, at a 200 mm pitch, allow mounting on zero-point clamping systems.

For shops that work without an operator, RoboBuddy sits between the robot and the vise: it clamps with a torque of up to 100 Nm, opens the vise after machining and finds the crank position by itself. The unit communicates via OPC-UA, IO-Link and Profinet. PocketSense monitors the clamping force, and WorkBuddy makes work on clamping towers easier. For a quotation, what matters is the vise series, the jaw width, the jaw type and, for automation, the model of the machine and of the robot.

What do we supply from the Allmatic-Jakob range?

ProductDescription
DuoCentric 125A high-pressure vise that combines centric and double clamping. The clamping force is 40 kN at 60 Nm, the clamping range for one part runs from 37 to 318 mm, and height differences between parts are compensated automatically up to 6 mm.
AllLite: CentroLite, CombiRail, BaseLiteThe "ECO-LINE" for clamping on milling machines. CentroLite is the centric vise, and CombiRail 50 and CombiRail 72 are multiple clamping rails, used for several parts on the same table.
TeleCentric and TeleSense 125Vises for 5-axis clamping, in the variants TeleSense 125, 125 Compact and 125 Connect. The family is aimed at raw and pre-machined parts, where tool access to five faces is essential.
RoboBuddy, PocketSense, WorkBuddyAutomation and control accessories. RoboBuddy opens and closes the vise without an operator, PocketSense monitors the clamping force, and WorkBuddy makes job preparation on clamping towers easier.

Why Allmatic-Jakob?

  • Centric and double clamping in the same vise on DuoCentric 125 — the number of adjustments is reduced when a shop alternates different parts
  • Ø 25H6 M10 mounting hole at a 200 mm pitch — the vise mounts directly on zero-point clamping systems
  • Separate lines for 5-axis clamping and for raw parts — the choice is made by machining stage, not by a single model
  • RoboBuddy with a clamping torque of up to 100 Nm — a robot cell can also work in unmanned shifts
  • Spare parts and accessories organised by family — the worn item is identified by the vise series

Which Allmatic-Jakob codes and series are requested most often?

CodeDescription
DuoCentric 125Centric and double vise, 125 mm jaw, 40 kN at 60 Nm
Duo Plus 125Multiple clamping vise, 125 mm width
CentroLiteCentric vise from the AllLite line
CombiRail 50Multiple clamping rail from the AllLite line
CombiRail 72Multiple clamping rail, size 72
BaseLiteClamping line from the AllLite range
TeleCentricMechanical vise for 5-axis clamping
TeleSense 125Vise for 5 axes, Compact and Connect variants
Titan 2Vise for raw parts, 5-axis clamping
CentroGrippVise for 5-axis clamping
RoboBuddyRobotic unit for opening and closing vises
PocketSenseClamping force monitoring

Where is Allmatic-Jakob equipment used?

  • Milling — clamping raw and machined parts on 3-axis and 5-axis centres
  • Small and medium series production — quick part changes on centric and double vises
  • Robot cells — loading and unloading vises in unmanned shifts
  • Tool and die shops — repeatable clamping on zero-point systems

How do we supply Allmatic-Jakob in Romania?

We can quote Allmatic-Jakob machine vises from the DuoCentric, CentroLite, CombiRail and TeleCentric lines, clamping towers, jaws and accessories. For a correct quotation we need the vise series or the name on the body, the jaw width, the jaw type and, for a replacement, a photograph of the nameplate. For automation, add the model of the machine and of the robot. Parts are supplied to order; the lead time is usually 1–4 weeks, and we confirm the exact date in the quotation.

For special jaws and for accessory combinations, compatibility with the existing vise is checked in the quotation, based on the series and the photograph.

Frequently asked questions about Allmatic-Jakob

What are DuoCentric 125, CentroLite, CombiRail and TeleCentric at Allmatic-Jakob?

DuoCentric 125 is a centric and double vise, CentroLite is a centric vise from the AllLite line, and TeleCentric is a mechanical vise for 5-axis clamping. Allmatic-Jakob makes clamping systems for machine tools: centric and double vises, 5-axis clamping, multiple clamping rails, clamping towers, hydraulic vises and automation accessories such as RoboBuddy. The company is based in Unterthingau, in Germany, and has been active since 1973.

How do I choose between DuoCentric 125 and a simple centric vise?

DuoCentric 125 has 125 mm jaws and can work either centrically, with a clamping range of 37–318 mm, or as a double vise, with two parts at 0–114 mm. If the task is a single large part, a centric vise may be sufficient. Send the dimensions of the part and the machine, and we check the suitable series.

Do you supply Allmatic-Jakob vises in Romania, and how fast?

Yes. Vises and accessories are supplied to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For automation or special jaws the lead time can be longer; we set the date in the quotation.

Can I replace the jaws of an older Allmatic vise?

It depends on the series. The outer jaw interface of DuoCentric 125 is compatible with the 125 mm movable jaws of the Titan2 and NC8 series. For an older vise, send the name on the body and a photograph, and we check whether a compatible jaw exists.

How do I prepare the request for a RoboBuddy mounted on a robot?

For RoboBuddy, send the model of the vise to be automated, the make and model of the machine, the type of robot and the interface wanted: OPC-UA, IO-Link or Profinet. The unit clamps with up to 100 Nm and mounts on the robot arm through the DIN ISO 9409-1 interface, so the robot flange data also helps.

How do I request a Allmatic-Jakob quotation?

Send the Allmatic-Jakob code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: ALLMATIC-Jakob Spannsysteme GmbH (manufacturer documentation)