Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Balteau NDT supplier in Romania

For Balteau NDT we quote Baltospot LLX, CERAM, GF and Crawler X-ray generators, Baltograph XLD and XSD generators, AIS cabinets and Baltoscope detectors; for a quotation we need the material inspected, the thickness and the voltage required.

Founded in 1906 · Headquarters: Hermalle-sous-Argenteau, Belgium

Request a quote

Who is Balteau NDT and what does it make?

Balteau NDT is a Belgian manufacturer of industrial radiography equipment for non-destructive testing (NDT), based in Hermalle-sous-Argenteau and active since 1906. The range is divided into four lines. Baltospot brings together portable constant-potential X-ray generators, in series such as LLX, CERAM, GF and Crawler. Baltograph covers the mobile and stationary XLD and XSD generators, for real-time applications and for fixed installations. Baltomatic groups the AIS series automatic cabinets and manipulators, and Baltoscope brings flat-panel detectors, image software, the digitiser and the control phantom.

Constant potential (CP) means that the voltage on the tube stays stable, so the dose is stable, which matters in digital radiography. LLX is a high-frequency, air-cooled generator, in the LLX110, LLX160, LLX200 and LLX225 versions, between 5 and 225 kV and up to 12 mA, weighing 16–23 kg. The CERAM series has a ceramic-insert tube and a 100 % duty cycle, for difficult environments, between 70 and 300 kV, while the Crawler series (GFC 160C, 200C, 300C) is designed for pipe inspection robots. XSD generators, in a 19-inch rack, range from 160 to 450 kV.

In practice, portable generators are used for inspecting welds on pipelines, shipyards and steel structures, and AIS cabinets for castings and components for aeronautics or railways. The choice starts from the thickness and material inspected, from the voltage required, from the working mode (directional or panoramic) and from the digital detector it is paired with.

What do we supply from the Balteau NDT range?

ProductDescription
Baltospot LLXPortable constant-potential, high-frequency, air-cooled generators: LLX110-DA, LLX160-DA, LLX200-DA and LLX225-DA (5 to 225 kV, 0.5 to 12 mA) and the panoramic version LLX200-PA. They are controlled with the DC1 unit or with the Hand-XD remote control.
Baltospot CERAM, GF and CrawlerCERAM 235, 35 and 35P (100 % duty cycle, up to 300 kV), the GFD and GFC generators (GFD 165, GFC 165, 205, 305) and the GFC 160C, 200C and 300C versions for pipe robots. They are paired with the CF2000 or Hand-X control units.
Baltograph XLD and XSDXLD100, 160 and 225 are constant-potential generators for real time, of 16.6 kg; XLMD160 and XLMD225 are versions of the same series. XSD160, 225, 320 and 450 are 19-inch rack generators, with a power of 4 to 4.5 kW, for installations with a separate tube head and a cooling unit.
Baltomatic AIS and BaltoscopeThe AIS229, AIS203RD, AIS500, AIS912, AIS231, AIS201, AIS228 and AIS228L cabinets, with 2-, 5- or 9-axis manipulators or with a conveyor, plus flat-panel detectors such as FPDigit 24-140R, FPDigit 16-100 and MobiX 16-125S and the Software Suite image package.

Why Balteau NDT?

  • Constant-potential generators in LLX and XLD — stable dose, required in digital radiography and in real-time inspections
  • Portable series from 12 kg — GFD 165 and GFC 165 of about 12 kg, for inspection on site and in hard-to-reach areas
  • CERAM series with a 100 % duty cycle — continuous operation in difficult environments, on site or in a hall
  • Crawler series — GFC 160C, 200C and 300C generators for pipe inspection robots, with a complete mechanical assembly and chopper package
  • AIS cabinets and manipulators — from 2-, 5- or 9-axis manipulators to cabinets with a conveyor, for parts from Ø 250 mm to Ø 1869 mm

Which Balteau NDT codes and series are requested most often?

CodeDescription
LLX110-DAPortable CP generator, 5–110 kV, 16 kg
LLX160-DAPortable CP generator, 5–160 kV, 16 kg
LLX200-DAPortable CP generator, 5–200 kV, directional
LLX225-DAPortable CP generator, 5–225 kV, 23 kg
LLX200-PAPortable CP generator, 5–200 kV, panoramic
CERAM 235Ceramic-insert generator, 70–235 kV, 27 kg
CERAM 35Ceramic-insert generator, 100–300 kV
GFC 165Portable generator, 50–160 kV, 12.3 kg
GFC 300CGenerator for crawler, 150–300 kV
XLD160CP generator for real time, 10–160 kV
XSD225Rack generator, 5–225 kV, up to 30 mA
XSD450Rack generator, 5–450 kV, 218 kg
AIS229Cabinet with a 5-axis manipulator, source 160–450 kV
AIS912Cabinet with a 9-axis manipulator, source 160–225 kV
FPDigit 24-140RFlat-panel detector, 43 × 43 cm, pixel 140 µm
Hand-XDControl unit with remote control, LLX series

Where is Balteau NDT equipment used?

  • Welding and steel fabrication — inspection of welded joints on pipelines and structures
  • Oil and gas — pipeline inspection, with portable generators and crawler-type robots
  • Foundries — radiography of castings, in AIS automatic cabinets
  • Aeronautics — inspection of components, with LLX generators and digital detectors
  • Shipyards and railways — inspection of welds and large components

How do we supply Balteau NDT in Romania?

We can quote Balteau NDT X-ray generators from the LLX, CERAM, GF, Crawler, XLD and XSD series, with the control units, AIS cabinets and flat-panel detectors. Balteau NDT is supplied to order; usually 1–4 weeks, and depending on the specification the lead time can be longer, as confirmed in the quotation. For a correct request, send the material and thickness to be inspected, the voltage wanted, the mode (directional or panoramic), the type of detector and, for existing equipment, the code from the nameplate.

Whether a generator covers a certain steel thickness is established from the material, the geometry of the part and the source-detector distance.

Frequently asked questions about Balteau NDT

What does Balteau NDT make?

Balteau NDT makes industrial radiography equipment in Belgium: Baltospot portable generators, Baltograph XLD and XSD mobile and stationary generators, Baltomatic AIS automatic cabinets and Baltoscope digital detectors, used for non-destructive inspection of welds, castings and pipelines.

How do I choose between the LLX, CERAM and GF series?

LLX is a high-frequency CP generator, between 5 and 225 kV, for precision digital radiography. CERAM has a ceramic insert and a 100 % cycle, for difficult environments. GF derives from the Crawler technology and has a low weight. Send us the steel thickness, the voltage required and the working mode.

Do you supply Balteau generators in Romania, and how fast?

Yes, Balteau NDT is supplied to order, usually in 1–4 weeks. Depending on the specification, the lead time can be longer, especially for AIS cabinets; the date is confirmed in the quotation, once we have defined the control unit and the accessories.

Which control unit goes with a Baltospot generator?

LLX is ordered with DC1 or with the Hand-XD remote control, and CERAM, GF and Crawler with CF2000 or with Hand-X. The correct pairing depends on the generator series; if you already have a set, send the code from the nameplate and the cable length required, so that we can check the match.

What data should I send for a quotation on an AIS cabinet?

For an AIS cabinet we need the maximum size of the parts (diameter and length), the source voltage wanted, the number of axes of the manipulator and the type of detector. For lines with a conveyor, add the rate and the size of the parts.

How do I request a Balteau NDT quotation?

Send the Balteau NDT code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Balteau NDT (manufacturer documentation)