Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Cleco supplier in Romania

For Cleco we quote 19RAA, 34RAA and 55RNL nutrunners, CellCore cordless tools, BTi spindles, mPro250 controllers, CWC impact wrenches and Dotco 12LF grinders, based on the series on the tool and the torque range.

Founded in 1894

Request a quote

Who is Cleco and what does it make?

Cleco is an American manufacturer of tools for industrial assembly lines, active since 1894. The main range is torque-controlled fastening tools: pneumatic angle and straight nutrunners, cordless electric tools, fixed fastening spindles, impact wrenches, torque wrenches and pneumatic motors, complemented by controllers and software for tracking every tightening. The second line is for material removal and drilling: pneumatic grinders and sanders, routers, saws, portable drills and riveting tools, sold under the Dotco and Cleco names.

In the fastening area, the angle nutrunners with clutch of the 19RAA, 24RAA, 34RAA (with Clecomatic clutch) and 55RNAL/75RNAL series, as well as the stall versions (19RAS, 34RAS, 55RNL), are pneumatic tools for repetitive tightening. For tightening with recording there are CellCore, CellClutch and CellTek cordless tools, in pistol-grip and angle versions, and the BTi, BTS and BUTS smart spindles measure torque and angle through transducers and encoders and are connected in a daisy chain. The mPro250, mPro300 and mPro400 controllers manage corded and cordless tools, and mPro Connect puts the controller in the tool. Torque wrenches are preset (PTW) or ratchet type, and the CV, CWC and CWM impact wrenches have a composite or metal housing. The Dotco 12LF angle grinders and the 10-xx and 12-xx series cover precision grinding.

Such tools appear on assembly lines in the automotive and heavy vehicle industry, in agricultural and earthmoving machinery and in aerospace. The choice depends on the torque required, the speed, the type of drive and the type of end, so the quotation starts from the series of the tool or from the spindle drawing.

What do we supply from the Cleco range?

ProductDescription
Pneumatic nutrunners, series 19, 24, 34 and 55/75Angle machines with a clutch or with stall shut-off, with lever start and, on most models, collar reverse. The 34RAA series has an indexable angle head and a Cleco motor for repetitive tightening on assembly lines.
CellCore, CellClutch and CellTek cordless tools, mPro controllersCordless electric tools in pistol-grip and angle versions. CellCore can be programmed directly on the tool and withstands drops from 5 feet (about 1.5 m); the mPro250 controller can integrate up to 16 cordless tools.
BTi, BTS, BUTS smart spindles and BD/BDU conventional spindlesFixed fastening spindles. The smart ones have a torque transducer and, on some versions, angle encoders, with daisy-chain connection and compatibility with the PDMi and VAMi controllers; BD/BDU are conventional spindles of sizes 1–4.
Impact wrenches, torque wrenches, pneumatic motors and Dotco toolsCV, CWC and CWM impact wrenches, PTW preset and ratchet torque wrenches, pneumatic vane motors (22 series) and axial piston motors (A2, A6, A8, B4), plus Dotco grinders and sanders.

Why Cleco?

  • Tightening with controlled and recorded torque — the mPro250, mPro300 and mPro400 controllers drive cordless and corded tools, and mPro Connect puts the controller directly in the tool
  • BTi, BTS and BUTS smart spindles — with a torque transducer and an angle encoder, in angle, straight and offset versions, for sizes 1 to 4
  • Pneumatic and cordless tools in the same range — 19RAA, 34RAA, 55RNL for compressed air; CellCore, CellClutch and CellTek for battery
  • Preset PTW torque wrenches — ±4 % accuracy and 100,000 cycles before recertification, with interchangeable sizes 9x12 and 14x18
  • Dotco tools for grinding and drilling — 12LF grinders at 12,000 or 20,000 rpm, 10 and 12 series, pistol and angle drills, routers and saws

Which Cleco codes and series are requested most often?

CodeDescription
19RAAAngle nutrunner with clutch
19RASAngle nutrunner with stall shut-off
24RAAAngle nutrunner with clutch
34RAAAngle nutrunner with Clecomatic clutch and indexable head
55RNLAngle nutrunner with stall shut-off
CellCoreCordless electric tool, programmable on the tool
CellClutchCordless electric tool, pistol-grip or angle
BTiSmart spindle, sizes 1–4, with torque transducer
mPro250Controller for up to 16 cordless tools
mPro400Controller for corded and cordless tools
CWCImpact wrench with composite housing
CWMImpact wrench with metal housing
PTWPreset mechanical torque wrench
22 SeriesPneumatic vane motor, 0.81–38.48 Nm
Dotco 12LFPneumatic angle grinder, 12,000 or 20,000 rpm
Dotco 10-xx / 12-xxSeries of pneumatic grinders, sanders and routers

Where is Cleco equipment used?

  • Automotive industry — assembly lines with smart spindles and cordless tools
  • Heavy vehicles, trailers and agricultural machinery — nutrunners and impact wrenches
  • Aerospace — drilling, riveting and material removal tools
  • Earthmoving machinery — torque tightening on assembly lines
  • Machining — pneumatic grinders, sanders and routers

How do we supply Cleco in Romania?

We can quote Cleco tools: pneumatic nutrunners, CellCore cordless tools, BTi smart spindles, mPro controllers, CV, CWC and CWM impact wrenches, PTW torque wrenches and Dotco grinding tools, supplied to order. The usual lead time is 1–4 weeks from order and, depending on the specification, it can be longer for configured spindles and controllers. For a correct quotation send us the series and the number on the tool, the torque range, the speed or air pressure, the type of end (square, angle, offset), the voltage of the battery or the controller and, for spindles, the size and the type of cable.

A fastening tool is recommended based on the torque range, the type of end and the power source, and the match of a spindle with a controller is confirmed on the codes of both.

Frequently asked questions about Cleco

What does Cleco make?

Cleco makes tools for assembly lines: pneumatic nutrunners, CellCore cordless tools, smart spindles, mPro controllers, impact and torque wrenches, pneumatic motors, plus Dotco tools for grinding, milling and drilling. The company has worked since 1894 and serves the automotive industry and other series production industries.

How do I choose between a pneumatic and a Cleco cordless tool?

The pneumatic tool (for example 34RAA) is simple, robust and suited to repetitive tightening, while the CellCore cordless tool is programmed on the tool and can report every tightening to an mPro controller. The torque range, data tracking and the air network decide. Send us the torque and the application.

Do you supply Cleco tools in Romania and how long does it take?

Cleco tools are supplied to order, usually in 1–4 weeks. For configured smart spindles or controllers, depending on the specification, the lead time can be longer. A tool can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.

Can I replace an old Cleco tool with a current series?

This is checked from the series and the number on the tool, the torque range, the speed, the type of end and the air or cable connection. A direct replacement is confirmed after comparing these data; send us the nameplate or a photo of the tool and, for spindles, of the controller used.

What data do I need to send for a quotation on a Cleco tool?

Send the tool series, the torque range, the speed, the type of end, the power source (compressed air, battery or cable), the number of pieces and whether you need a controller and software. For grinding tools add the speed and the type of collet.

How do I request a Cleco quotation?

Send the Cleco code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Cleco Production Tools (manufacturer documentation)