Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Elcometer supplier in Romania

For Elcometer we quote 456 and 415 coating thickness gauges, 510, 506, 106 and 108 adhesion testers, the 319 climate meter, the 138 Bresle kit and 280 and 270 pinhole detectors, based on the substrate and the inspection standard.

Headquarters: Manchester, United Kingdom

Request a quote

Who is Elcometer and what does it make?

Elcometer is a British manufacturer based in Manchester, active since 1947, of instruments for the inspection of coatings, of surfaces prepared for painting and of concrete. The range includes the coating inspection lines: coating thickness gauges, adhesion testers, climate and dew point meters, pinhole detectors and kits for salt contamination. They are used in anticorrosion protection work on tanks, pipes and metal structures, as well as in industrial paint shops.

Elcometer 456 is the dry film thickness gauge with separate or integral probe: it reads over 70 values per minute, over 140 with the scanning probe, measures with ±1% on smooth, rough, thin or curved surfaces and can measure up to 31 mm of coating on a metal substrate; it stores 150,000 readings in 2,500 batches and transfers the data by USB or Bluetooth to the ElcoMaster software. Elcometer 456 IPC, 415 and 500 are versions for protective coatings, paint and powder, and, respectively, coating on concrete. Adhesion is checked with 510 (automatic pull-off), 506 and 106 (pull-off), 108 (hydraulic), 1542 (cross-cut) or 106/6 on concrete. Elcometer 319 measures climate parameters according to ISO 8502-4, and the 138 Bresle Salt Meter determines soluble salts according to ISO 8502-6 and 8502-9. Elcometer 280 looks for defects in the coating with pulsed direct current.

Such instruments appear on anticorrosion protection sites, at the acceptance of pipes and tanks, in industrial paint shops and at inspection companies. The choice depends on the substrate (steel, aluminium, concrete), on the expected thickness of the coating and on the standard applied, so the quotation starts from the inspection task and from the existing instrument.

What do we supply from the Elcometer range?

ProductDescription
Elcometer 456 and 415Dry film thickness gauges: 456 in separate and integral versions, from the basic model B to model T, with interchangeable probes; 415 is intended for industrial paints and powder coating. The data reach the ElcoMaster software by USB or Bluetooth, for inspection reports.
Elcometer 510, 506, 106 and 108Adhesion testers: 510 (automatic) and 506 (hydraulic) work by pull-off, like 106 (mechanical) and 106/6, the latter for coatings on concrete; 108 is hydraulic, 508 works by pushing, and 1540 and 1542 perform the cross-cut test.
Elcometer 319, 308 and 138Instruments for application conditions and surface cleanliness: 319 measures temperature, humidity and dew point, 308 is a hygrometer, and the 138 Bresle Salt Meter converts the conductivity of a droplet into salt density.
Elcometer 280, 270 and 266Detectors of pinholes and thin areas in coatings: 280 with pulsed direct current, of the wand type, with probes for coatings of up to 25 mm; 270 for fine pinholes, and 266 is another high-voltage pinhole detector.

Why Elcometer?

  • Elcometer 456 with a high reading rate — over 70 measurements per minute, over 140 with the scanning probe, ±1% accuracy and a memory of 150,000 readings
  • Probes for coatings of up to 31 mm on a metal substrate — smooth, rough, thin or curved surfaces, with separate and integral versions
  • Pulsed direct current detector — Elcometer 280 finds thin areas and bubbles even on a wet, dirty or slightly conductive coating, with no ground cable to the part
  • Climate meter according to ISO 8502-4 — Elcometer 319 establishes whether the environment allows painting and can work as a remote recorder
  • Adhesion tests for metal and concrete — from the 510 automatic pull-off and the 108 hydraulic tester to 106/6 for coatings on concrete

Which Elcometer codes and series are requested most often?

CodeDescription
456Dry film thickness gauge, separate or integral probe
456 IPCThickness gauge for industrial protective coatings
415Thickness gauge for industrial paint and powder coating
500Thickness gauge for coating on concrete
510Automatic pull-off adhesion tester
506Pull-off adhesion tester
106Mechanical pull-off adhesion tester
106/6Adhesion tester for coatings on concrete
108Hydraulic adhesion tester
1542Cross-cut adhesion tester
319Dew point and climate meter, ISO 8502-4
308Hygrometer
138Bresle Salt Meter for soluble salts
280Pulsed direct current pinhole detector
270Fine pinhole detector
PTG6Precision material thickness gauge

Where is Elcometer equipment used?

  • Anticorrosion protection — metal structures, tanks and pipes, from surface preparation to the final coat
  • Pipes and industrial installations — pinhole detection and checking of coating thickness
  • Concrete and civil works — adhesion and thickness of coatings on concrete, reinforcement cover
  • Industrial paint shops — paint and powder coating thickness
  • Non-destructive testing — material thickness by ultrasound

How do we supply Elcometer in Romania?

We can quote Elcometer coating thickness gauges, adhesion testers, climate meters, pinhole detectors and salt kits, bringing them in to order. The lead time is usually 1–4 weeks to order, and depending on the specifications it may be longer for kits and accessories. For a quotation, send us the instrument model or the substrate type (steel, aluminium, concrete), the estimated coating thickness, the inspection standard applied, whether you work in an explosion-hazard zone and which probes or accessories you use now. The exact lead time is confirmed in the quotation.

We select the model once we receive the substrate type, the expected coating thickness and the inspection standard applied.

Frequently asked questions about Elcometer

What does Elcometer make?

Elcometer, from Manchester and active since 1947, produces inspection instruments for coatings and concrete: coating thickness gauges, adhesion testers, dew point meters, pinhole detectors, kits for soluble salts and ultrasonic thickness gauges. They are used in anticorrosion protection, pipelines and industrial paint shops.

How do I choose between a separate and an integral Elcometer 456?

The integral version has a built-in probe and is used with one hand, while the separate version accepts a wide range of probes, for more flexibility in measurement. Send us the substrate, the expected thickness and the place of measurement, so that we can recommend the right model from the B–T range.

What is the lead time for an Elcometer instrument in Romania?

Instruments are brought in to order, usually in 1–4 weeks; depending on the specifications, the lead time may be longer, especially for complete kits. The exact lead time is confirmed in the quotation, after we receive the model wanted.

Can I replace an older Elcometer thickness gauge with a current model?

We check the model and series of the old instrument, the probe type, the standard used in inspection and the reporting software. Equivalence is confirmed after this comparison; a photo of the nameplate and of the probe speeds up the check.

What do I send for a quotation on an adhesion tester or a pinhole detector?

For adhesion, send the substrate, the coating type and the test standard; for pinholes, the coating thickness, the surface (pipe, tank, concrete) and the voltage needed. Elcometer 280 works on coatings of up to 25 mm with the right probes, so the thickness matters in the choice.

How do I request a Elcometer quotation?

Send the Elcometer code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Elcometer Limited (manufacturer documentation)