Carr Lane Manufacturing supplier in Romania
Carr Lane Manufacturing makes clamping components for automotive and aerospace assembly lines
Headquarters: St. Louis, Missouri, USA
Who is Carr Lane Manufacturing and what does it make?
Carr Lane Manufacturing is an American manufacturer of workholding and assembly components (jig & fixture), based in St. Louis, Missouri, with a second plant in Austin, Texas. From a range of over 100,000 components, what we can quote covers alignment and locating pins, clamps (toggle, screw, edge, hinged), drill bushings, hoist rings, threaded inserts and modular fixturing systems — the basic parts used to build a holding fixture on a machine tool or an assembly line.
Its in-house manufacturing has certifications stated in the manufacturer's documentation, and the products reach customers through over 200 resellers worldwide. Product codes follow its own format with the prefix "CL" (for example CL-373-RLT for a locating pin with lockscrew, or CL-2500-SHR-2 for a swivel hoist ring), while drill bushings use standard ANSI codes without this prefix. The catalogue also includes the hydraulic and pneumatic clamping systems of the KOSMEK brand, a separate brand.
For the Romanian market, Carr Lane means access to standardised clamping components for inspection and assembly fixtures, where the customer already has a drawing or a reference code and is looking for the exact part, not an approximate equivalent.
What do we supply from the Carr Lane Manufacturing range?
| Product | Description |
|---|---|
| Locating Pins | Round and diamond pins, in press-fit or lockscrew versions, plus floating pins and bullet-nose pins for positioning parts on a fixture. An example code is CL-373-RLT, a round pin with lockscrew. Used to establish the repeatable position of a part on a base plate or an inspection fixture. |
| Clamps (Toggle, Screw, Edge) | Toggle clamps, screw clamps, edge clamps and hinged clamps, with clamping forces from about 45 kg to over 2,000 kg on heavy industrial models. Fitted on welding, dimensional inspection or machining fixtures, where the part must be held firmly during the operation, without deformation. |
| Hoist Rings | Swivel, pivoting, side-pull and low-profile hoist rings, plus lifting eyes, with capacities from a few hundred lb up to 100,000 lb (about 45 tonnes). An example code format is CL-2500-SHR-2. They screw directly onto the heavy part and allow lifting from varied angles, without rotating uncontrollably under load. |
| Drill Bushings | Drill guide bushings, using standard ANSI codes (without the CL prefix), for the precise positioning of holes on series drilling fixtures. They are fitted in the fixture plate and guide the drill exactly onto the point marked on the drawing, reducing position deviation between identical parts. |
| Modular Fixturing and Quick-Change Systems | Components for modular holding fixtures, with base plates, columns and adjustment elements, plus quick-change systems for work pallets and KOSMEK hydraulic/pneumatic clamping. An example code format for modular fixturing is CL-MF25-5401. Used on lines where the same fixture must be reconfigured quickly for several parts. |
Why Carr Lane Manufacturing?
- Over 100,000 clamping components under the same brand, with a uniform CL coding format
- Quality certifications indicated in the manufacturer's technical documentation for in-house manufacturing in St. Louis and Austin
- KOSMEK hydraulic and pneumatic clamping systems, integrated in the same catalogue
- Standard ANSI codes for drill bushings, easy to check on the production drawing
Which Carr Lane Manufacturing codes and series are requested most often?
| Code | Description |
|---|---|
| CL-373-RLT | Round locating pin with lockscrew |
| CL-12-DLT-.7067 | Diamond locating pin with lockscrew |
| CL-935-DPT | Press-fit diamond locating pin |
| CL-499-DLT | Diamond locating pin with lockscrew |
| CL-6-FLP | Floating locating pin |
| CL-1-DPZ | Locating pin; the type is confirmed from the manufacturer's catalogue |
| CL-7-SLP-1 | Locating pin; the type is confirmed from the manufacturer's catalogue |
| CL-12-LP | Locating pin; the type is confirmed from the manufacturer's catalogue |
| CL-2500-SHR-2 | Swivel hoist ring |
| CLM-6-FN | Metric component, nut/threaded element format |
| CL-MF25-5401 | Modular fixturing component, 25 mm diameter |
Where is Carr Lane Manufacturing equipment used?
- Automotive — part clamping on assembly lines and dimensional inspection
- Aerospace — holding fixtures for precision machining and inspection
How do we supply Carr Lane Manufacturing in Romania?
Lead time and availability are given in the quotation; we work from the manufacturer's technical documentation and from the official part coding format. Carr Lane's production is concentrated in the USA, so we source the components to order, usually in 1–4 weeks, depending on the manufacturer's confirmation and on transport. For a quotation we need the full part code (CL- format for most components, ANSI code for drill bushings) or, if you do not have the code, the drawing with the required dimensions; availability for this range is confirmed in the quotation.
The equivalence of a Carr Lane code with a part already fitted is established from the technical drawing or the full code, especially for the modular KOSMEK components, where the configuration varies by project.
Frequently asked questions about Carr Lane Manufacturing
What products does Carr Lane Manufacturing make?
Carr Lane makes workholding and assembly components for industrial fixtures — locating pins, clamps, hoist rings, drill bushings and modular fixturing systems. The catalogue covers over 100,000 standardised components, used to build inspection and assembly fixtures.
How does Carr Lane Manufacturing part coding work?
Most components use the CL prefix followed by a family and size code, for example CL-373-RLT for a locating pin. Drill bushings are the exception and use standard ANSI codes, without the CL prefix — send the exact code from the drawing for an accurate quotation.
Can Carr Lane be sourced in Romania or Europe?
Carr Lane Manufacturing's production is concentrated in its two USA plants. We source the components to order, usually in 1–4 weeks, depending on the manufacturer's confirmation and on transport.
What do I need to send for a Carr Lane component quotation?
If you have the full code (CL- format or ANSI code for bushings), send it exactly as it appears on the drawing or on the existing part. Without a code, we need the main dimensions and the application of the part, so that we can identify the correct equivalent from the catalogue.
What is the KOSMEK system in the Carr Lane range?
KOSMEK is the hydraulic and pneumatic clamping brand present in the Carr Lane catalogue — hydraulic and pneumatic clamps and cylinders, power vises and quick-change pallet clamps. It is used on lines where the fixture must be actuated automatically, not manually.
How do I request a Carr Lane Manufacturing quotation?
Send the Carr Lane Manufacturing code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Carr Lane Manufacturing (manufacturer documentation)

