Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Cembre supplier in Romania

For Cembre we quote pre-insulated lugs 1010–1013, non-insulated lugs N-MA and MP608, HP and HN mechanical crimping tools and battery-powered hydraulic tools; we need the conductor cross-section, the material and the connector code.

Founded in 1969 · Headquarters: Brescia, Italy

Request a quote

Who is Cembre and what does it make?

Cembre is an Italian manufacturer of electrical connectors, based in Brescia and founded in 1969. The company makes cable lugs and cable connectors, terminal blocks and distribution blocks, thermal transfer marking systems and, alongside them, the tools used to make these connections: mechanical crimping pliers, manual and battery-powered hydraulic tools, bench presses and hydraulic shears for cables and steel wire ropes.

The tool side is organised by the force required. Crimping pliers for ferrules cover cross-sections from 0.08 to 16 mm², manual hydraulic tools work between 50 and 130 kN, and the compression heads reach up to 1100 kN. Battery-powered hydraulic tools have forces from 15 to 136 kN and conductor cross-sections up to 400 mm², with an OLED display and SMARTOOL technology on certain models. The lugs are found in a long catalogue of codes: insulated (1010, 1011, 1012, 1013), non-insulated for copper or aluminium (N-MA, N-FA, MP608, KE) and F-M or CP-M connectors.

For electrical maintenance in Romania, the important part is the complete system: the connector, the die and the tool are designed together, which matters in substations, in switchboards, in railway or wind installations, where crimping must be repeatable and verifiable. It is aimed at maintenance electricians, wiring workshops and installation companies that need the same tool and the same dies on several sites.

What do we supply from the Cembre range?

ProductDescription
HP and HN mechanical crimping toolsPliers and mechanical crimping tools from the HP1, HP3, HP5, HNN3, HNN4, HPH1, HN-K7 and HNKE4 series, for ferrules, lugs and connectors. They are used in wiring and routine maintenance work.
Battery-powered hydraulic toolsPortable crimping tools with forces between 15 and 136 kN, for cross-sections up to 400 mm², in C-head or U-head versions, with an OLED display and SMARTOOL functions on selected models. Battery-powered hydraulic shears for cables and steel wire ropes are also available.
Insulated and non-insulated lugs and connectorsPre-insulated terminals 1010–1013, 10128, F-M and CP-M, plus non-insulated lugs N-MA, N-FA, MP608, KE, S-M, S-U, S-P and S-PP, in copper, steel or bimetal, for copper and aluminium cables.
Terminal blocks and distribution blocksLine terminals and distribution blocks for switchboards and electrical equipment, complemented by cable entry systems and thermal transfer marking, with applications in industry, energy and railways.

Why Cembre?

  • Complete connector – die – tool system — crimping is carried out with elements designed to work together
  • Battery-powered hydraulic tools from 15 to 136 kN, for conductors up to 400 mm² — a single operator positions the cable and the connector
  • Compression heads from 50 to 1100 kN — covering everything from switchboards to busbars and large-section conductors
  • Pneumatic, electro-pneumatic or pneumo-hydraulic bench presses — repeatability in wiring harness production
  • Extended catalogue of lugs, from insulated code 1010–1013 to non-insulated for copper and aluminium — there is a code for almost every cross-section

Which Cembre codes and series are requested most often?

CodeDescription
HP1Mechanical crimping tool
HP3Mechanical crimping tool
HP5Mechanical crimping tool
HNN3Mechanical crimping tool
HNN4Mechanical crimping tool
HPH1Mechanical crimping tool
HN-K7Mechanical crimping tool
HNKE4Mechanical crimping tool
1010Pre-insulated polyamide fork lug
1011Pre-insulated polyamide round pin lug
1012Pre-insulated PVC female flat connector
1013Pre-insulated PVC male flat connector
F-MPre-insulated connector
CP-MPre-insulated connector
N-MANon-insulated lug for copper cables
MP608Non-insulated lug for copper cables

Where is Cembre equipment used?

  • Electrical switchboards and wiring — lugs, ferrules and bench presses for repetitive production
  • Energy and electrical substations — crimping with hydraulic tools for large cross-sections
  • Rail transport and rolling stock — connectors and marking for on-board and trackside installations
  • Renewable energy — connectors for wind and photovoltaic installations and storage
  • Charging stations for electric vehicles — connection and cable entries

How do we supply Cembre in Romania?

From the Cembre range we can quote lugs and connectors by code, mechanical and hydraulic crimping tools, dies and cable shears. For connectors and dies, items can ship in 24–72 h when the item is in stock, locally or at the supplier, while the rest of the range is supplied to order, usually in 1–4 weeks. For an accurate quotation we need the connector code, the cross-section and the material of the conductor (copper or aluminium), the tool and die in use now, and the estimated number of crimps per shift, so that we can choose between a manual tool, a battery-powered one or a bench press.

The compatibility of a die with a tool of different origin is stated after checking the codes of both parts.

Frequently asked questions about Cembre

What does Cembre make?

Cembre makes electrical connectors and the related installation tools: insulated and non-insulated lugs and connectors, terminal blocks and distribution blocks, marking systems, plus mechanical, hydraulic and battery-powered crimping tools, bench presses and hydraulic shears. The company is based in Brescia, in Italy, and has been active since 1969.

How do I choose between a mechanical, a hydraulic and a battery-powered tool?

The choice depends on the conductor cross-section, the number of crimps and the location. Mechanical tools cover routine work at small cross-sections, manual hydraulic tools cover forces of 50–130 kN, and battery-powered ones remove the external pump and reduce fatigue. Send us the cross-section and the connector type.

Can Cembre products be supplied in Romania, and how quickly?

Yes, for Romania we supply the products to order. Lugs and connectors can ship in 24–72 h when the item is in stock, locally or at the supplier, while tools and dies, to order, take about 1–4 weeks. Sets with special dies may take longer, and the exact lead time appears in the quotation after the codes are checked.

Can I use a Cembre die with another maker's tool?

Compatibility is checked first: the die profile, the force and the tool head must match the connector. Send us the make and series of the tool, the code of the die you want and the connector code, and we check whether the assembly is permitted before preparing the quotation.

What data is needed for a quotation on cable lugs?

We need the conductor material (copper or aluminium), the cross-section in mm², the diameter of the connecting screw or bolt, whether the lug must be insulated, and the quantity. If you have the code from the packaging, it helps us identify the exact series, for example 1010–1013 or N-MA.

How do I request a Cembre quotation?

Send the Cembre code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: CEMBRE S.p.A. (manufacturer documentation)