AMETEK MOCON supplier in Romania
For AMETEK MOCON we quote CheckMate 4, CheckPoint 4 and MultiCheck 2 package headspace gas analysers, MAP Check 3 continuous analysers, ISM-3 for oxygen, LeakMatic II detectors and OX-TRAN permeation analysers; for a quotation we need the package and the gases.
Who is AMETEK MOCON and what does it make?
AMETEK MOCON makes instruments for measuring gases in packages and for testing packages: analysers for the gas in the headspace above the product, continuous analysers on the packaging line, leak detectors, permeation analysers, gas mixers and gas chromatographs for special applications. The range for modified atmosphere packaging (MAP, that is protective gases instead of air) carries the Dansensor brand.
For checking MAP packages, CheckMate 4 is a benchtop analyser that stores settings for up to 1000 products, and the SV version measures oxygen in packages with a very small headspace, by inserting the probe into the package. CheckPoint 4 is the portable version, which measures O2 and CO2, and MultiCheck 2 combines the analyser, the leak detector and the valve tester, with memory for more than 100,000 tests. On the line, MAP Check 3 continuously monitors the gas content on vertical and horizontal packaging machines and can stop the machine when limits are exceeded, and ISM-3 monitors the oxygen level with a 4–20 mA output and two programmable alarms. OX-TRAN analysers measure the oxygen permeation of films and packages.
Instruments of this type appear in factories that pack food in a protective atmosphere, in quality control laboratories and on packaging lines with machines made abroad. For a correct quotation, what matters is the package type, the volume of gas in the package, the gases used (O2, CO2, N2) and whether the test is done on the line or in the laboratory.
What do we supply from the AMETEK MOCON range?
| Product | Description |
|---|---|
| CheckMate 4, CheckPoint 4 and MultiCheck 2 | Headspace gas analysers for MAP packages: benchtop CheckMate 4 (with the SV version for small volumes), portable CheckPoint 4, for O2 and CO2, and MultiCheck 2, which adds a leak detector and, optionally, a degassing valve test unit. |
| MAP Check 3 and ISM-3 | Continuous analysers on the packaging line. MAP Check 3 exists in continuous, pressure and vacuum versions; ISM-3 monitors oxygen, with a 4–20 mA output (optionally 0–10 V) and self-diagnosis. The MAP Mix gas mixers complete the programme. |
| Dansensor and Lippke leak detectors | LeakMatic II automatically checks, after the packaging machine, packages with leaks. LeakPointer 3/3+ and LeakPointer H2O are non-destructive detectors, and Lippke 5000 and VC1400 test seal strength, burst pressure and vacuum leaks. |
| OX-TRAN, WVTR and CO2TR permeation analysers | Instruments for oxygen permeation (OTR, the OX-TRAN family), water vapour (WVTR) and CO2 permeation of films, containers, bottles and packages, used in laboratories for material testing, according to standardised methods. |
Why AMETEK MOCON?
- CheckMate 4 with settings stored for up to 1000 products — benchtop analysis of the gases in MAP packages
- CheckMate 4 SV — oxygen in packages with a very small headspace, by inserting the probe into the package instead of extracting the sample
- Portable CheckPoint 4 — O2 and CO2 control on packages of any shape and size, right next to the line
- MultiCheck 2 — analyser, leak detector and valve tester in a single instrument, with memory for more than 100,000 tests
- MAP Check 3 on the line — continuous gas monitoring and machine stop when preset limits are exceeded
Which AMETEK MOCON codes and series are requested most often?
| Code | Description |
|---|---|
| CheckMate 4 | Benchtop analyser for the gas in the package headspace |
| CheckMate 4 SV | Version for a very small headspace |
| CheckPoint 4 | Portable O2 and CO2 analyser for MAP packages |
| MultiCheck 2 | Gas analyser, leak detector and valve tester |
| MAP Check 3 | Continuous gas analyser on the packaging line |
| MAP Check 3 Pressure | Pressure version of the MAP Check 3 analyser |
| MAP Check 3 Vacuum | Vacuum version of the MAP Check 3 analyser |
| ISM-3 | Process analyser for oxygen, 4–20 mA |
| LeakMatic II | Automatic in-line leak detector |
| LeakPointer 3 | Non-destructive leak detector |
| Lippke 5000 | Seal strength and burst tester |
| OX-TRAN | Family of oxygen permeation analysers |
| MAP Mix Provectus | Gas mixer for packaging |
Where is AMETEK MOCON equipment used?
- Food industry — modified atmosphere packaging, including coffee
- Packaging laboratories — O2, water vapour and CO2 permeation of films
- Packaging lines — continuous gas analysis and leak detection
- Film and flexible packaging producers — verification of barrier properties
How do we supply AMETEK MOCON in Romania?
We can quote AMETEK MOCON package gas analysers, continuous analysers, leak detectors and permeation analysers, plus their consumables and accessories. For a quotation send us the package type and the volume of gas in it, the gases used (O2, CO2, N2), the number of tests per day, whether the check is done on the line or in the laboratory and, for existing instruments, the code from the nameplate. Gas analysers and leak detectors are supplied to order, usually 1–4 weeks. For permeation analysers and complete line systems: depending on the specification, the lead time can be longer. The exact lead time appears in the quotation.
The accuracy of a measurement on a specific package is determined from the package and gas data, and calibration at the place of use is outside our offer.
Frequently asked questions about AMETEK MOCON
What does AMETEK MOCON make?
AMETEK MOCON makes instruments for analysing the gases in packages and for testing them: headspace analysers (CheckMate 4, CheckPoint 4, MultiCheck 2), continuous analysers (MAP Check 3, ISM-3), leak detectors, OX-TRAN permeation analysers, gas mixers and gas chromatographs.
How do I choose between CheckMate 4, CheckPoint 4 and MultiCheck 2?
CheckMate 4 is the benchtop instrument, for the laboratory or for line control, CheckPoint 4 is portable and measures O2 and CO2, and MultiCheck 2 adds leak detection. Tell us the package type, the gases and the volume in the package, so that we can recommend the model.
Do you supply AMETEK MOCON analysers in Romania and within what lead time?
Yes. Gas analysers and leak detectors are supplied to order, usually 1–4 weeks. For probes, filters and common consumables: 24–72 h when the item is in stock, locally or at the supplier. For permeation analysers and complete line systems: depending on the specification, the lead time can be longer. We confirm the exact lead time in the quotation.
Can I replace an older Dansensor analyser?
Send us the model and the series from the nameplate, the gases measured and the probe type. We check whether the model is still in the programme or whether it has been replaced by a new one, for example CheckMate 4 or CheckPoint 4; the compatibility of accessories is confirmed after we see the codes.
What data do I send for a quotation on a MAP Check 3 analyser?
The type of packaging machine (vertical or horizontal), the gases in the mixture, the line speed, the mounting space and the signals you need, such as stopping the machine when limits are exceeded. With these we choose between MAP Check 3, the pressure version or the vacuum one.
How do I request a AMETEK MOCON quotation?
Send the AMETEK MOCON code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: AMETEK MOCON (manufacturer documentation)

