Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Armstrong supplier in Romania

For Armstrong we quote steam traps (880 series, controlled disc CD-3300, float FT-4000), Pumptrap condensate pumps and centrifugal separators; from the code on the trap body we identify the exact model.

Founded in 1900 · Headquarters: Three Rivers, Michigan, USA

Request a quote

Who is Armstrong and what does it make?

Armstrong is a North American manufacturer specialising in industrial HVAC systems - condensate pumps, steam traps, steam/liquid separators, strainers. Armstrong systems are intended for steam, condensate and hot water installations in factories, hospitals and commercial buildings. Armstrong Pumptraps are non-electrically powered condensate pumps: they operate on steam, air or pressurised gas, with no motors, seals or electrical components, according to the manufacturer's documentation (for example the PT-200 and PT-300 series).

Mechanical inverted bucket steam traps are built for demanding environments; the 880 series works at pressures of up to 17 bar (10 bar for model 880), with a maximum allowable rating of 17 bar at 232°C, according to the manufacturer's datasheet. The inverted bucket design is mechanically simple: no electronics, no fine adjustments, just a float and a valve - high reliability.

Armstrong centrifugal separators (DS series) remove the condensate entrained in steam by centrifugal force and protect sensitive equipment; efficiency and operating limits are confirmed per model, from the datasheet.

What do we supply from the Armstrong range?

ProductDescription
Armstrong 880 series - inverted bucket steam trapMechanical inverted bucket steam trap for high pressures and critical applications. Maximum working pressure of up to 17 bar (250 psig; 10 bar for model 880), maximum allowable rating of 17 bar at 232°C, cast iron body (ASTM A48 Class 30), threaded connections from 1/2 to 1-1/4 inch NPT/BSPT, capacity of up to about 2,000 kg/h (model 883), according to the datasheet of the 880 series. Applications: process steam lines (textile, paper, chemical), steam turbines, heat exchangers, sterilisation autoclaves.
Armstrong Pumptrap - non-electrically powered condensate pumpNon-electrically powered condensate pump, driven by steam, air or pressurised gas, for returning condensate. The PT-200 and PT-300 series have capacities of 2,400–3,700 lb/h (approx. 1,100–1,700 kg/h), and 11,600–16,600 lb/h (approx. 5,300–7,500 kg/h) respectively; pressures, dimensions and certifications are confirmed per model, from the datasheet. Applications: returning condensate from low-pressure equipment (textile calenders, paper dryers, sterilisation autoclaves) to the boiler to save treated water and energy.
Armstrong centrifugal separator (DS series)Centrifugal separator for removing droplets of condensate entrained in steam. Principle: steam enters the cylindrical chamber tangentially, centrifugal force throws the condensate onto the wall where it collects and is discharged through a steam trap. The DS series includes the DS-1 and DS-2 models in ductile iron, DS-3 in 304 stainless steel and DS-4 in carbon steel (connections from 1/2 to 12 inch, depending on the model), with no moving parts; pressures, efficiency and certifications are confirmed per model, from the datasheet. Applications: protecting steam turbines, heat exchangers and superheaters against entrained condensate and water hammer.
Controlled disc steam trap (CD series)Ultra-compact thermodynamic steam trap for medium and high pressures. Operating principle: hot condensate passes through a metal disc, partly vaporises, and the vapour pressure closes the disc until the condensate cools and the cycle starts again. The CD series (controlled disc) includes, for example, the CD-3300 and CD-4080 models; pressure, capacity, dimensions and certifications are confirmed per model, from the manufacturer's datasheet. Applications: heat tracing of pipes, small heat exchangers, instrumentation lines, point drainage.

Why Armstrong?

  • Inverted bucket steam traps (800 series) with a simple mechanical design, no electronic components
  • Steam traps operate without electrical power, driven by the differential pressure of the steam
  • Simple mechanical design: inverted bucket traps have no electronic components
  • Non-electrically powered Pumptrap pumps: they operate on steam, air or pressurised gas
  • Pressure equipment compliance, stated in the manufacturer's documentation, depending on the model
  • The manufacturer's software tools for sizing and selection, according to Armstrong documentation

Which Armstrong codes and series are requested most often?

CodeDescription
AB-3000Bimetallic steam trap for superheat conditions
SH-1600Bimetallic steam trap from the superheat series
CD-3300Controlled disc steam trap, stainless steel
CD-4080Disc steam trap for high pressure
FT-4000Float steam trap with built-in thermostat
GD-30Direct-acting pressure regulator for steam
GP-2000Pressure regulator with external pilot and diaphragm
ACVControl valve for steam and industrial fluids
Python 1500Precision control valve for thermal processes
SAGE UMTPortable ultrasonic tester for checking steam traps
AIMWireless acoustic monitor for steam networks
AccelabarFlow measuring element with integrated differential pressure
VerabarAveraging pitot flow sensor for pipes
4200Condensate pump for return to the boiler
PT-300Mechanical steam-driven pump, no electrical power
OB-2000Diaphragm temperature regulator for heat exchangers
TVS 800Valve station for steam trap groups
The BrainDigital mixing centre for domestic hot water

Where is Armstrong equipment used?

  • Textiles (calenders, dryers, dyeing)
  • Pulp and paper industry (Yankee drying cylinders, digesters)
  • Pharmaceutical industry (sterilisation autoclaves, clean steam generators)
  • Food processing (cooking, pasteurisation, sterilisation)
  • Chemical industry (steam-heated reactors, distillation)
  • Oil and gas (heat exchangers, tank heating, steam tracing)
  • Healthcare (hospitals, instrument sterilisation, air conditioning)
  • Commercial buildings (heating, shopping centres, hotels)
  • District heating (urban thermal plants)
  • Power generation (steam turbines, condensers)

How do we supply Armstrong in Romania?

At Infinitrade we bring in steam traps and related equipment to order through EU supply channels. For standard items we can sometimes ship in 24–72 h when the item is in stock, locally or at the supplier, while for large separators or high-pressure configurations the lead time to order is usually 1–4 weeks. A fixed lead time is set in the quotation, after prior confirmation from the supplier. For a correct quotation, send us the pipe diameter, the working pressure and temperature, and the condensate discharge capacity required — we reply with the real availability and lead time confirmed.

Service during the manufacturer's warranty period for Armstrong steam traps is outside our offer.

Frequently asked questions about Armstrong

How do I choose the right Armstrong steam trap for my steam line?

The right choice starts from the working pressure, the condensate flow and the type of application: inverted bucket series withstand back pressure well, controlled disc series are compact and light, and float and thermostat series handle variable loads without live steam losses. Send the upstream-downstream pressure, the estimated flow and the pipe diameter to identify the right series and size.

What documents do I send for an Armstrong equipment quotation?

For a complete quotation we need the code or series from the label of the existing equipment, the working pressure and temperature, the condensate or steam flow and the diameter of the connections. If you are replacing a model already fitted, a photo of the nameplate speeds up identifying the correct replacement version, including for accessories such as gaskets or service kits.

Do you supply Armstrong equipment in Romania?

Orders for Armstrong International equipment reach Romania through supply on request: we start from the manufacturer's technical documentation. Normally, a standard steam trap or regulator can be brought in to order, usually in 1–4 weeks, with the final lead time depending on the series and the quantity ordered.

What is the difference between a disc steam trap and a float one?

The controlled disc trap, such as the CD series, uses a single movable disc that opens and closes according to the differential pressure, and is compact and resistant to water hammer. The float and thermostat trap, such as the FT series, discharges condensate continuously through the float and removes air through a thermostatic element, suited to variable loads and high flows.

How do I request a Armstrong quotation?

Send the Armstrong code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Armstrong International (manufacturer documentation)