Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

ASUTEC supplier in Romania

For ASUTEC we quote stop modules, sliding stops, parallel, centric and angular grippers and ASHWQC and ASWWX automatic tool changers; we need the code from the module, the pallet mass or the robot payload.

Headquarters: Nürtingen, Germany

Request a quote

Who is ASUTEC and what does it make?

ASUTEC develops and produces, in Nürtingen, Germany, components for pallet transfer systems and for handling technology. The range exceeds 5,000 components: stop, acceleration and positioning modules for transfer conveyors, two-jaw, centric and angular grippers, compensation modules and automatic tool changers for robots, plus special versions on request.

The stop modules, also called separators, stop and release workpiece pallets on the transfer line. There are damped versions, which stop the pallet smoothly and without vibration, undamped versions, for fast routes with short stopping times, a High-Speed version for high speeds and loads, and a version for conveyors with slim-design rollers. All are made in pneumatic or electric versions. The sliding stop is mounted at intersections, where the pallet changes its direction of transport from transverse to longitudinal. For sizing, what matters is the conveyor speed, the pallet mass, the number of accumulated pallets and the friction coefficient of the transport system.

On the handling side, the ASGP parallel grippers, the ASGMP miniature and the ASGPKG long-stroke grippers, the ASGZ centric grippers and the ASGW angular grippers hold parts on assembly lines. The ASHWQC tool changers, with pneumatic self-locking, and the ASWWX connect the robot to the end effector, and signals and pneumatic media can pass through them.

What do we supply from the ASUTEC range?

ProductDescription
Stop modules (separators)They stop and release workpiece pallets on transfer lines. They are available with or without damping, in the High-Speed version and in the version for slim-roller conveyors, pneumatic or electric. The choice depends on the conveyor speed, the pallet mass and the transport type.
Sliding stopStops pallets at intersections to change the direction of transport, from transverse to longitudinal. It lowers so the pallet can pass over it. It works together with vertical transfer modules and pallet stops, in pneumatic or electric versions, with or without damping.
Parallel, centric and angular grippersThe ASGP, ASGMP (miniature) and ASGPKG (long stroke) families for parallel gripping, ASGZ for centric gripping and ASGW for angular gripping. They are used for part handling and in robotics; the stroke and force are chosen according to the part.
Automatic tool changersThe pneumatic ASHWQC series, with self-locking, covers payloads from 1.4 kg to 300 kg, and the ASWWX series, also pneumatic, handling weights from 3 to 150 kg. Optional pass-through modules transfer signals, media or energy to the tool.

Why ASUTEC?

  • Stop, acceleration and positioning modules and return stops from the same family — they fit together on a pallet transfer line
  • Smooth, vibration-free stopping on the damped versions — important when the pallet carries sensitive parts
  • Pneumatic and electric versions of the same modules — the choice is made by the control type of the line
  • Tool changers with patented self-locking, with no spring and no locking pins, which keeps the connection even when pressure is lost — important for the safety of the robotic cell
  • Special versions for transfer modules and grippers — useful when standard dimensions do not fit the existing machine

Which ASUTEC codes and series are requested most often?

CodeDescription
ASMNG-80Stop module (separator) from the stop module range
ASV-160Sliding stop for transfer intersections, with four air connections
ASGPUniversal parallel gripper with two jaws
ASGMPCompact miniature parallel gripper
ASGPKGLong-stroke parallel gripper with high load capacity
ASGZCentric gripper
ASGWAngular gripper
ASHWQCPneumatic automatic tool changer with self-locking, payloads from 1.4 to 300 kg
ASWWXPneumatic automatic tool changer, handling weights from 3 to 150 kg

Where is ASUTEC equipment used?

  • Assembly lines with pallets — stop, acceleration and positioning modules
  • Transfer intersections — sliding stop for changing the direction of transport
  • Robotic handling cells — grippers and tool changers
  • Assembly, handling and linear motion technology — standard and special components

How do we supply ASUTEC in Romania?

We can quote ASUTEC stop, acceleration and positioning modules, sliding stops, grippers and tool changers. For a correct request, send the code from the module or gripper, the transfer system used, the pallet mass, the conveyor speed and the version wanted, pneumatic or electric. For grippers we also need the stroke, and for tool changers the robot payload. We order the items; the usual lead time is 1–4 weeks, and depending on the specification it can be longer, in which case we confirm it in the quotation.

Special ASUTEC designs are quoted from the drawing and specifications, and the mounting dimensions are checked in the quotation before ordering.

Frequently asked questions about ASUTEC

What ASUTEC modules exist for pallet transfer systems and for robot handling?

The company in Nürtingen makes components for pallet transfer systems, namely stop, acceleration, positioning modules and return stops, as well as handling technology: grippers, compensation modules and tool changers for robots. The range exceeds 5,000 components, with pneumatic and electric versions.

How do I choose the stop module for my pallet line?

It starts from the conveyor speed, the pallet mass and the number of pallets that accumulate in front of the module. The transport type also matters: accumulation roller chain, double chain, belt or slat chain have different friction coefficients. Send these details and we determine the damped or undamped version.

Do you supply ASUTEC in Romania, and how fast?

Yes. ASUTEC items can ship in 24–72 h when the item is in stock, locally or at the supplier, and an item supplied to order usually arrives in 1–4 weeks. For special modules or more complex configurations the lead time can be longer; we confirm it in the quotation.

Can I replace a worn ASUTEC stop module?

Yes, if you send the code from the module, for example ASMNG-80, and a photo of the nameplate. We check the pneumatic or electric version, whether damping is fitted and the position of the end sensors, then confirm the right item in the quotation.

What details do I send for an ASUTEC tool changer?

The series wanted, ASHWQC or ASWWX, the robot payload and the type of pass-through needed for air, signals or energy. The ASWWX series is made for handling weights between 3 and 150 kg, and the ASHWQC for loads between 1.4 and 300 kg.

How do I request a ASUTEC quotation?

Send the ASUTEC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: ASUTEC GmbH (manufacturer documentation)