Lintech supplier in Romania
Screw-driven linear tables, ball screws and profile rail guides
Founded in 1970 · Headquarters: Monrovia, California, USA
Who is Lintech and what does it make?
Lintech is an American manufacturer from Monrovia, California, that has made mechanical linear positioning components and systems for more than five decades. It started in 1970 with precision shaft assemblies for round guides, and in 1980 launched a standard screw-driven linear table. Since then it has added dozens of linear tables and actuators, with screw or belt drive, that couple to any stepper motor or servo motor.
The problem it solves is one of maintenance and design: a packaging line, an assembly machine or a test bench needs repeatable linear motion, and the original part can no longer be found at the machine builder. An engineer facing a ball screw table or a profile rail guide, with no reference other than the series on the housing, can quickly identify the family: the 130 series is only 2.875 inches wide, the 150, 200 and 250 series have a low height at high load capacity, and the 610 series is fully enclosed and has IP30 protection.
The range also includes rolled, precision and ground ball screws, in three lead error classes, profile rail guides from miniature to roller types, hardened 1060 steel shafts with class L, S or N tolerances, rotary tables and custom systems. On replacement, the motor adapters and the limit switches must remain compatible with the original configuration of the machine.
What do we supply from the Lintech range?
| Product | Description |
|---|---|
| Screw-driven linear tables and actuators (100–250 series) | Ball screw positioning tables, from the compact 130 series, with a stroke of up to 60 inches, to the 150, 200 and 250 series for heavy loads at low height. Each series takes screw options, motor plates, limit switches, linear or rotary encoders and a brake. |
| Belt-driven actuators | Linear tables with belt drive for long strokes and high speeds, where the precision of a ball screw is not needed. They are mounted with a stepper motor or servo motor and complement the range of screw tables from the same family. |
| Ball screw assemblies (RS, PS, GS) | Rolled (RS050–RS150), precision (PS062, PS075) and ground (GS062, GS075) screws, cut to the required length, with five types of end support, a nut with or without preload, and a round, vertical or L-shaped flange. |
| Profile rail guides (MR, ARC, HRC, WRC, ARR, HRR, LRR) | Six families of linear rail guides: miniature MR (2–15 mm), standard ARC and HRC (15–55 mm), wide-rail WRC and roller versions for standard, high or low height, with a short, standard or long block. |
Why Lintech?
- Numerous options within the same series — the 130 series has 32 screw variants and 26 motor adapter plates, so an existing configuration can be reproduced
- Three classes of ball screws — the lead error falls from 0.003 inches per foot (rolled) to 0.0005 inches per foot (ground), according to the tolerance the application requires
- Profile rail guides in six variants — from the miniature MR in 440c stainless steel to the HRR and LRR roller guides for heavy loads
- The rail is cut to the required length, to the millimetre — useful when a guide of unusual length has to be replaced
- Enclosed IP30 tables (610 series) — dust protection in assembly and packaging halls, with no covers added afterwards
Which Lintech codes and series are requested most often?
| Code | Description |
|---|---|
| Series 130 | Ball screw linear table, 2.875 inches wide, stroke up to 60 inches |
| Series 100 | Screw table with square rail guide, higher load capacity |
| Series 170 | Screw table for heavy loads, 6- or 12-inch carriage |
| Series 610 | Fully enclosed table, IP30 protection |
| SA / TRSA | Single and double precision shaft assemblies for round guides |
| RS050 | Rolled ball screw, 0.500 inch diameter |
| RS075 | Rolled ball screw, 0.750 inch diameter |
| RS100 | Rolled ball screw, 1.000 inch diameter |
| PS062 | Precision ball screw, 0.625 inch or 16 mm |
| PS075 | Precision ball screw, 0.750 inch or 20 mm |
| GS062 | Ground ball screw, 0.625 inch or 16 mm |
| GS075 | Ground ball screw, 0.750 inch or 20 mm |
| MR | Miniature profile rail guide, sizes 2–15 mm, 440c stainless steel |
| ARC | Standard profile rail guide with 4 rows, sizes 15–55 mm |
| HRC | Profile rail guide for heavy loads, sizes 15–55 mm |
| ARR / HRR / LRR | Roller guides: standard, high and low height |
Where is Lintech equipment used?
- Industrial automation — positioning tables on assembly and packaging lines
- Laboratory and test equipment — repeatable linear movements on test benches
- Semiconductor and electronics production — short-stroke positioning with miniature guides
- Special machine building — custom mechanical positioning systems
- Medical and inspection equipment — rotary and linear tables for compact assemblies
How do we supply Lintech in Romania?
For Lintech we prepare quotations on the table or guide series, not on general descriptions. It helps us to have a photo of the nameplate or the housing, the series (for example 130 or 170), the stroke length, the pitch and diameter of the screw, the type of motor adapter and the options fitted: limit switches, encoder, brake. Items are supplied to order, usually in 1–4 weeks; for custom systems the lead time can be longer. Availability and the exact lead time are confirmed in the quotation, after the configuration has been checked.
The interchangeability of an old table with a current series is established after analysing the series and the options fitted.
Frequently asked questions about Lintech
What does Lintech make?
Lintech makes linear motion components in California: screw or belt tables and actuators, ball screws, profile rail guides, precision shafts, rotary tables and custom systems.
How do I choose between a rolled, a precision and a ground screw?
The difference lies in the lead error: 0.003 inches per foot for the rolled one, 0.002 for the precision one and 0.0005 for the ground one. For a replacement, stay with the class originally fitted; if you do not know it, send us the diameter, the pitch and the total length.
Can Lintech parts be ordered for a machine located in Romania?
Yes, they are items supplied to order, usually in 1–4 weeks, depending on the series and the options. Tables with multiple configurations (brake, encoder, motor adapter) can need a longer lead time, confirmed in the quotation.
Can I replace an old table with a new series with the same stroke?
The same stroke is not enough: the width of the table, the mounting holes, the screw pitch and the motor adapter plate all matter. With the series, a photo of the table and the mounting dimensions, we check whether a compatible item exists, and we confirm equivalence after checking.
What data should I send for a Lintech quotation?
Send the series or the code on the table, the useful stroke, the load moved, the motor type (stepper or servo) and whether there are limit switches, an encoder or a brake. For profile rail guides, add the rail size and the block type: short, standard or long.
How do I request a Lintech quotation?
Send the Lintech code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Lintech (manufacturer documentation)

