VMECA supplier in Romania
Suction cups, cartridges and vacuum generators for handling
Founded in 1991 · Headquarters: Seoul, South Korea
Who is VMECA and what does it make?
VMECA is a South Korean maker of vacuum handling technology, founded on 22 May 1991 and based in Seoul. The range starts from suction cups and vacuum cartridges and extends to vacuum generators, V-Grip gripping systems, special grippers and vacuum conveyors for powders and bulk materials. The company has subsidiaries in Germany, at Filderstadt, in the USA, Thailand and China.
The problem it solves is choosing and maintaining the vacuum gripping chain: the suction cup, the ejector and the sensor must match the part, otherwise vacuum losses or dropped parts occur. VMECA offers Magic suction cups, where the user replaces only the worn component out of the six that make it up, not the whole cup. The vacuum cartridges (micro, mini, midi) are multistage ejectors, with vacuum levels of, for example, −50 to −90 kPa on the micro and mini models.
The Turtle Pump generators integrate the filter and the vacuum cartridge, and the Eco Turtle Pump adds an air-saving control valve, a digital vacuum sensor and a blow-off function, with compressed air consumption reduced by up to 90%. The acid-resistant stainless steel vacuum conveyors are designed for powders and granules without dust. For a quotation, the code on the suction cup or generator and the air pressure in the installation matter.
What do we supply from the VMECA range?
| Product | Description |
|---|---|
| Magic suction cups and vacuum suction cups | Suction cups configurable by choosing six components, with lip, bellows and material variants, plus suction cups with level compensator for uneven surfaces and bellows suction cups for curved surfaces or thin sheets in a stack. |
| Micro, mini and midi vacuum cartridges | Multistage ejectors. The two-stage micro ones give a vacuum of −50 or −83 kPa with low air consumption; the two- or three-stage mini ones reach −50, −65, −85 and −90 kPa, for small electronic components. |
| Turtle Pump and Eco Turtle Pump | Vacuum generators with integrated filter and multistage cartridge. The Eco version adds a control valve with digital air saving, a vacuum sensor, an air valve and release blow-off, with a single M8 6-pin connector. |
| V-Grip systems and vacuum conveyors | V-Grip (G and GM series) grips objects with flat or irregular surfaces through an EPDM foam pad and an adjustable valve. The vacuum conveyors move powders and bulk materials, dust-free, in a polished stainless steel body. |
Why VMECA?
- Modular Magic suction cups — only one of the six components is replaced, so maintenance cost falls compared with a one-piece cup
- Micro, mini and midi vacuum cartridges — stated vacuum levels from −50 to −90 kPa, for small objects up to heavier parts
- Turtle Pump with integrated filter — the generator and the pleated filter come in a single body, with simpler mounting
- Eco Turtle Pump with air saving — valve with digital vacuum sensor and integrated blow-off, with a single M8 6-pin connector
- Stainless steel vacuum conveyors for powders — dust-free transfer, with an automatic filter cleaning system
Which VMECA codes and series are requested most often?
| Code | Description |
|---|---|
| Magic Suction Cup | Suction cup made of six separately replaceable components |
| Vacuum Suction Cup | Vacuum suction cups: flat lip, bellows, with level compensator |
| Micro Vacuum Cartridge | Two-stage micro cartridge, vacuum −50 or −83 kPa |
| Mini Vacuum Cartridge | Mini cartridge in 2 or 3 stages, vacuum −50 to −90 kPa |
| Midi Vacuum Cartridge | Three-stage midi cartridge, used in the Turtle Pump |
| Turtle Pump | Vacuum generator with integrated filter |
| Eco Turtle Pump | Vacuum generator with control valve and digital sensor |
| Mega Eco Turtle Pump | Mega version of the Eco Turtle Pump series |
| V-Grip G series | Vacuum gripping system, G series |
| V-Grip GM series | Vacuum gripping system, GM series |
| Magic Gripper | Gripper with Magic suction cups |
| Vacuum Conveyor | Vacuum conveyor for powders and bulk materials, stainless steel |
| Water Free Unit | Units in the manufacturer's Water Free category |
Where is VMECA equipment used?
- Packaging — gripping boxes and films with suction cups and V-Grip systems
- Glass and sheet metal — lifting sheets with bellows suction cups
- Woodworking and plastics — transfer of boards and moulded parts
- Powders and granules — transfer with stainless steel vacuum conveyors
- Electronics — handling with micro and mini vacuum cartridges
How do we supply VMECA in Romania?
For VMECA we need the code or the name of the component: Magic suction cup, micro/mini/midi cartridge, Turtle Pump, V-Grip or conveyor. If the spare part has no marking, send photos and the connection dimensions, the lip material and the available air pressure. The products are supplied to order, usually in 1–4 weeks; vacuum conveyors and configured systems may have a longer lead time. The exact lead time appears in the quotation issued after the code is checked.
The compatibility of a Magic suction cup with an older holder is confirmed on the basis of the connection dimensions and the series of the component.
Frequently asked questions about VMECA
What does VMECA make?
Since 1991 VMECA has made vacuum components and systems: Magic suction cups, vacuum cartridges, Turtle Pump generators, V-Grip gripping systems, grippers and vacuum conveyors for powders. It is based in Seoul, and the company also has a subsidiary in Filderstadt, Germany.
How do I choose a micro, mini or midi vacuum cartridge?
Start from the mass and porosity of the part and the vacuum level wanted: micro has −50 or −83 kPa, mini reaches −90 kPa. Small parts, such as chips, suit small cartridges; for more gripping force, move to midi, integrated in the Turtle Pump.
How soon are VMECA parts delivered in Romania?
For VMECA, standard items are supplied to order, usually in 1–4 weeks. V-Grip systems or conveyors for powders, configured for the application, may need longer; the lead time is set after the code is analysed.
Can I use a VMECA suction cup on a vacuum generator from another maker?
It depends on the connection, the flow of the generator and the lip material. We confirm compatibility once we receive photos, the thread or connection diameter and the supply pressure.
What do I need to send for a quotation on a Turtle Pump generator?
Send the compressed air pressure, the type of part gripped and its mass, whether you want the Eco version with sensor and air saving, and the control output used by the PLC. With this data we select the series and the accessories.
How do I request a VMECA quotation?
Send the VMECA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: VMECA Co., Ltd. (manufacturer documentation)

