Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Yamaha Motor supplier in Romania

For Yamaha Motor we quote SCARA robots from the YK-XG, YK-XE and YK-TW series, Robonity and FLIP-X axes, XY-X Cartesian robots and RCX320, RCX340 and RCX341 controllers, based on the reach, the payload and the controller required.

Request a quote

Who is Yamaha Motor and what does it make?

Yamaha Motor makes industrial robots for assembly and handling of small parts: SCARA robots (with an articulated arm in the horizontal plane), Cartesian robots, individual electric axes, linear conveyor modules, pick & place robots, controllers and a vision system for robots. For an assembly line engineer or an integrator, what matters is that the robot, the axes and the controller come from the same family and are programmed in the same language, YAMAHA BASIC.

The SCARA range covers arm lengths from 120 to 1200 mm and maximum payloads of up to 50 kg. YK-XG Tiny has arms of 120–220 mm and 1 kg, YK-XG Small 5 kg, and YK-XG Large runs from 700 to 1200 mm, with 10–50 kg. YK-XGP is the version protected against dust and drips, equivalent to IP65, and YK-XEC and YK-XGC/XC are versions for clean environments, with an ISO class 4 and class 3 equivalent respectively. YK-TW is an orbital-type SCARA, YK-XGS is mounted on the ceiling or inverted, and the YE series is the entry-level version, with arms of 400–710 mm. The XY-X series means 2 to 6 orthogonal axes: arm, gantry, pole or XZ type.

For individual axes there are Robonity (ABFS, ABAS, ABAR, AGFS, AGBS, AGXS), FLIP-X (types T, F, GF, N, B, R and GX05–GX20), TRANSERVO with a stepper motor and PHASER with a linear motor. The RCX340 controller drives up to 4 axes, expandable to 16, RCX341 is the controller dedicated to the large YK1200XG SCARA, RCX320 drives 2 axes, and RDV-X, ERCD and SR1-X are for a single axis. The quotation starts from the robot type, the reach, the payload and the controller.

What do we supply from the Yamaha Motor range?

ProductDescription
YK-XG, YK-XE, YK-TW and YE series SCARA robots4-axis robots for assembly and handling: YK-XG from 120 to 1200 mm (Tiny, Small, Medium, Large), YK-XE and YE of 400–710 mm and 4–10 kg, orbital-type YK-TW of 350–500 mm and YK-XGS for ceiling or inverted mounting.
XY-X Cartesian robots and YP-X pick & placeXY-X is an electric actuator made up of 2 to 6 orthogonal axes, in arm, moving arm, gantry, pole, XZ and lift-lower shaft versions. YP-X are pick & place robots with 2, 3 or 4 axes for handling small parts.
Robonity, FLIP-X, TRANSERVO and PHASER individual axesRobonity (ABFS, ABAS, ABAR, AGFS, AGBS, AGXS) and FLIP-X (T, F, GF, N, B, R, GX05–GX20) use a servo motor, TRANSERVO uses a stepper motor, and PHASER a linear motor. There are also axes without a motor, in the LBFS, LBAS, LBAR and LGFS series.
RCX320, RCX340, RCX341, RCX440 and YHX controllersRCX320 drives 2 axes, RCX340 up to 4 axes, and RCX341 is dedicated to the YK1200XG SCARA, all in the YAMAHA BASIC language, while RCX3-SMU is the speed monitoring unit for them. RCX440 and YHX are new multi-axis controllers; RDV-X, ERCD and SR1-X drive a single axis.

Why Yamaha Motor?

  • SCARA from 120 to 1200 mm — YK-XG Tiny for small parts, 1 kg, up to YK-XG Large with 10–50 kg for heavier handling
  • Versions for demanding environments — YK-XGP at IP65 equivalent and YK-XEC, YK-XGC/XC for cleanrooms with an ISO class 4 and 3 equivalent
  • Axis families for different drives — Robonity and FLIP-X with a servo motor, TRANSERVO with a stepper motor, PHASER with a linear motor
  • One language for robots and controllers — RCX320, RCX340 and RCX341 are programmed in YAMAHA BASIC, with I/O commands and remote commands
  • Various fieldbus networks — CC-Link, Ethernet, DeviceNet, EtherNet/IP, PROFINET, PROFIBUS and EtherCAT

Which Yamaha Motor codes and series are requested most often?

CodeDescription
YK-XGTiny, Small, Medium and Large SCARA robots (120–1200 mm)
YK-XGPSCARA protected against dust and drips, IP65 equivalent
YK-XGSSCARA for ceiling or inverted mounting
YK-XECSCARA for cleanroom, ISO class 4 equivalent
YK-XGC/XCSCARA for cleanroom, ISO class 3 equivalent
YK-TWOrbital-type SCARA, 350–500 mm
YK-XEEntry-level SCARA, 400–710 mm
XY-XCartesian robot with 2–6 orthogonal axes
YP-XPick & place robot with 2, 3 or 4 axes
ABASBasic Robonity axis, slider type
AGBSAdvanced Robonity axis with toothed belt
RCX320Controller for 2 axes, YAMAHA BASIC
RCX340Multi-axis controller, up to 4 axes (expandable to 16)
RCX341Controller dedicated to the large YK1200XG SCARA
RCX3-SMUSpeed monitoring unit for RCX340 and RCX341
LCM100Linear conveyor module

Where is Yamaha Motor equipment used?

  • Electronics assembly — insertion and handling of parts on boards
  • Automotive — assembly of small components and handling between stations
  • Packaging — pick & place with fast robots
  • Cleanrooms — YK-XEC and YK-XGC/XC SCARA for handling in controlled environments
  • Special-purpose machines — individual axes and linear conveyor modules for flexible lines

How do we supply Yamaha Motor in Romania?

We can quote Yamaha Motor SCARA robots, individual axes, Cartesian robots and controllers, supplied to order. The lead time is usually 1–4 weeks to order and, depending on the specification, can be longer for robots configured with a controller and accessories. For a correct quotation, send us the robot type (SCARA, Cartesian, individual axis), the arm length or the stroke, the payload, the working environment (dust, water, cleanroom), the controller wanted and the fieldbus network. For an existing robot, add the complete code from the nameplate.

Our offer covers the robot, axis and controller lines; a robot is confirmed together with its controller and the arm length or the stroke.

Frequently asked questions about Yamaha Motor

What does Yamaha Motor make in the automation area?

Yamaha Motor makes SCARA and Cartesian robots, pick & place robots, individual axes with a servo motor, stepper motor or linear motor, linear conveyor modules, controllers and a vision system for robots. They are equipment for assembly and handling of small parts, programmed in YAMAHA BASIC.

How do I choose between YK-XG Small, Medium and Large?

The choice starts from the reach and the payload: Small has 250–400 mm and 5 kg, Large has 700–1200 mm and 10–50 kg. The environment matters too: YK-XGP for dust and drips, YK-XEC for cleanrooms. Send us the distance, the mass of the part and the environment and we recommend the series.

How soon can you supply a Yamaha robot in Romania?

Robots and controllers are supplied to order, usually 1–4 weeks. For robots configured with a controller, depending on the specification, the lead time can be longer. You receive the exact lead time in the quotation.

Can I replace an RCX240 controller with an RCX340?

The axes driven, the robot connected, the fieldbus network and the existing programs are compared. A direct replacement is confirmed after the comparison; send the code of the controller and of the robot from the nameplate, the program version and the list of inputs and outputs used.

What data do I send for a SCARA robot quotation?

State the reach wanted, the payload with the end effector, the work cycle, the environment (dust, drips, cleanroom), the mounting position, the controller and the fieldbus network of the line. If you are replacing a robot, send the code from the nameplate.

How do I request a Yamaha Motor quotation?

Send the Yamaha Motor code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Yamaha Motor (manufacturer documentation)