Thorlabs supplier in Romania
For Thorlabs we quote LTS150–LTS600 linear stages with integrated controller, DDS direct-drive stages, BBD30x and MBD602 controllers and joysticks; we need the travel, the load, the accuracy and the control mode.
Founded in 1989 · Headquarters: Newton, New Jersey, USA
Who is Thorlabs and what does it make?
Thorlabs is an American manufacturer of optics and photonics equipment, based in Newton, New Jersey, and active since 1989; for automation and metrology, the motorised translation stages and their controllers are what matter. The range goes from stages with 1.5 mm of travel to 1000 mm axes, with one, two or three axes, driven by piezo, stepper motors or DC servo motors. For a quotation, send us the stage code (for example LTS300/M or DDS600/M), the travel, the load and the controller currently used.
The LTS150, LTS300, LTS450 and LTS600 stages have an integrated stepper controller, with a keypad for manual control and a USB connection for the computer; the parameters are saved in the stage's non-volatile memory and applied at start-up. The calibrated accuracy per axis is below ±5 µm, the bidirectional repeatability below ±2 µm, the minimum step 0.1 µm, the speed up to 50 mm/s, and the load 15 kg in horizontal mounting and 4 kg in vertical mounting; the stages can be combined in XYZ configurations. Because the motor is a stepper, the platform holds its position even without power.
The DDS220, DDS300, DDS600, DDS800 and DDS1000 stages have brushless DC linear servo motors, with direct drive, no screw and therefore no backlash, linear optical encoders and speeds of up to 400 mm/s; the repeatability is ±0.25 µm (±0.6 µm on DDS800 and DDS1000), and the horizontal load is 3 kg on DDS220 and 10 kg on the others. They are controlled with the BBD30x benchtop controllers or the MBD602 rack controller and can take two- or three-axis joysticks. The rest of the range includes 12, 25, 30 and 50 mm stages, vertical stages, a 150 mm XY stage and optical delay lines of up to 4000 ps.
What do we supply from the Thorlabs range?
| Product | Description |
|---|---|
| LTS linear stages with integrated controller | LTS150, LTS300, LTS450 and LTS600, with travel of 150–600 mm, stepper motor, control from the keypad or via USB, calibrated accuracy below ±5 µm, repeatability below ±2 µm and a load of 15 kg horizontally, combinable in XYZ configurations. |
| DDS direct-drive linear stages | DDS220, DDS300, DDS600, DDS800 and DDS1000, with brushless DC linear servo motor, linear optical encoder, speed of up to 400 mm/s, repeatability of up to ±0.25 µm and no backlash, for long, fast axes. |
| BBD30x and MBD602 controllers | BBD30x benchtop controllers and MBD602 rack controller for the DDS stages, with optional two- or three-axis joysticks for precise manual control. The controller is chosen by the number of axes and the place of mounting, on a bench or in a rack. |
| Short-travel motorised stages | 12, 25, 30 and 50 mm stages, with piezo, inertia piezo, ultrasonic piezo, stepper or DC servo drive, including 30 mm stages with integrated controller and motorised vertical stages. |
Why Thorlabs?
- Travel from 1.5 mm to 1000 mm — the same range for fine adjustments and for long axes
- LTS with integrated controller and non-volatile memory — the stage works without a computer, from the keypad
- DDS with direct drive, no backlash — repeatability of ±0.25 µm at speeds of up to 400 mm/s
- Calibrated accuracy below ±5 µm on LTS — repeatable positioning for inspection and measurement
- XYZ configurations and two- or three-axis joysticks — multi-axis positioning from the same range
Which Thorlabs codes and series are requested most often?
| Code | Description |
|---|---|
| LTS150(/M) | Linear stage with integrated controller, 150 mm travel |
| LTS300(/M) | Linear stage with integrated controller, 300 mm travel |
| LTS450(/M) | Linear stage with integrated controller, 450 mm travel |
| LTS600(/M) | Linear stage with integrated controller, 600 mm travel |
| DDS220(/M) | Direct-drive stage, 220 mm travel, 3 kg load |
| DDS300(/M) | Direct-drive stage, 300 mm travel |
| DDS600(/M) | Direct-drive stage, 600 mm travel |
| DDS800(/M) | Direct-drive stage, 800 mm travel |
| DDS1000(/M) | Direct-drive stage, 1000 mm travel |
| BBD30x | Benchtop controllers for the DDS stages |
| MBD602 | Rack controller for the DDS stages |
Where is Thorlabs equipment used?
- Metrology and inspection — positioning of parts under sensors and cameras
- Optics and photonics laboratories — alignment of optical components
- University research — automated measurement setups
- Precision component production — repeatable positioning at micrometre level
How do we supply Thorlabs in Romania?
We can quote Thorlabs LTS and DDS motorised stages, BBD30x and MBD602 controllers, joysticks and mounting accessories, as well as the short-travel stages from the same range. For selection we need the travel, the load and the mounting orientation, the accuracy and speed required, the number of axes and the control mode (manual, computer or automatic). We supply them to order, usually in 1–4 weeks; a stage can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is stated in the quotation.
For an XYZ configuration we confirm the permitted load on the vertical axis after we receive the mass of the part and the position of its centre of gravity.
Frequently asked questions about Thorlabs
What does Thorlabs make for positioning?
Thorlabs makes motorised translation stages with one, two or three axes and travel from 1.5 mm to 1000 mm, driven by piezo, stepper or servo, LTS stages with integrated controller, DDS direct-drive stages, controllers, joysticks and optical delay lines.
How do I choose between an LTS and a DDS stage?
LTS has a stepper motor and integrated controller, holds its position without power and carries 15 kg horizontally, at speeds of up to 50 mm/s. DDS has direct drive, no backlash, speeds of up to 400 mm/s and repeatability of ±0.25 µm, but needs a separate controller.
How soon can we receive a Thorlabs motorised stage?
A stage or a controller can ship in 24–72 h when the item is in stock, locally or at the supplier, and the rest are supplied to order, usually in 1–4 weeks. For configurations with several axes, depending on the specification, the lead time may be longer.
Can I combine LTS stages in an XYZ system?
Yes, LTS stages can be mounted in XYZ configurations, and LTS450 and LTS600 serve as the base for an LTS150 or LTS300 stage mounted vertically. We check the load on the vertical axis, which is 4 kg, and the adapter plates needed.
What data should I send for a quotation on a Thorlabs motorised stage?
The travel, the load and the mounting orientation, the accuracy and repeatability required, the speed, the number of axes, the control mode (keypad, computer, joystick) and the thread of the mounting holes, metric or inch. If you are replacing an existing stage, its full code is enough for identification.
How do I request a Thorlabs quotation?
Send the Thorlabs code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Thorlabs, Inc., Wikipedia (manufacturer documentation)

